SLICKPRO6M-V0 – 6 Inch Pro Audio Midrange

Brand :

AED 219.25
admin
  • 6 Inch Pro Audio Midrange: Non pressed paper cone
  • Dual roll foam surround
  • 25mm voice coil
  • Polycotton spiders
Category:

VIBE 6 Inch Pro Audio Midrange

SLICKPRO6M-V0 – 6 Inch Pro Audio Midrange: For over 10 years we have produced high end Pro audio in our Blackdeath range which has always been the loudest and best looking around! So it was about time we added Pro audio across the rest if the VIBE family.

The latest in SLICK Pro products have been designed around efficiency in order to get the best sounding and best priced Pro speakers possible, for example with the 6 inch Midrange having a sensitivity of 98dB!! this allows the speaker to play at huge volumes even on lower power. The range includes 6 and 8 inch midranges and a 3.7 inch Bullet tweeter, all with a unique to car audio rubberised gasket and well known SLICK design concept.

 


 

Specifications

  • Model – SLICKPRO6M-V0
  • Type – Pro audio midrange.
  • Configuration – 1-way
  • Speaker Size – 6.6” (167mm)
  • Peak/RMS Power – 275W / 125W
  • Sensitivity – 98dB
  • Frequency Response – 100Hz – 9kHz
  • Impedance – 4Ω
  • Mounting Depth – 1.9” (73mm)
  • Mounting Diameter – 5.7” (144mm)
  • Grill Included – No
  • Recommended Amp – POWERBOX250.2-V0

Reviews

There are no reviews yet.

Be the first to review “SLICKPRO6M-V0 – 6 Inch Pro Audio Midrange”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSLICKPRO6M-V0 – 6 Inch Pro Audio Midrange removeBoss Audio System 625UAB removeBoss Audio System Phantom - 12" DUAL Voice Coil (4 Ohm) 2600W Subwoofer. (Sold Single) P129DC removeBOSS Audio Systems BAB8 Amplified Car Subwoofer removeBoss Audio System 508UAB removeBDPRO10M-V9: BlackDeath 10 Inch Pro Audio Midrange remove
ImageSLICKPRO6M-V0 – 6 Inch Pro Audio MidrangeBOSS Audio Systems BAB8 Amplified Car SubwooferBDPRO10M-V9: BlackDeath 10 Inch Pro Audio Midrange
SKU
Rating
PriceAED 219.25AED 199.00AED 329.00AED 499.00AED 299.00AED 478.95
Stock

Out of stock

Out of stock

AvailabilityOut of stockOut of stock
Add to cart

Description
  • 6 Inch Pro Audio Midrange: Non pressed paper cone
  • Dual roll foam surround
  • 25mm voice coil
  • Polycotton spiders
Single-DIN, MECH-LESS Multimedia Player (no CD/DVD) Detach Panel BluetoothBoss Audio System Phantom - 12" DUAL Voice Coil (4 Ohm) 2600W Subwoofer. (Sold Single) P129DC

BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

Single-DIN, CD/MP3 Player Bluetooth
  • BlackDeath 10 Inch Pro Audio Midrange high output driver
  • Alloy Gasket included
  • Sold in Singles
Content

VIBE 6 Inch Pro Audio Midrange

SLICKPRO6M-V0 – 6 Inch Pro Audio Midrange: For over 10 years we have produced high end Pro audio in our Blackdeath range which has always been the loudest and best looking around! So it was about time we added Pro audio across the rest if the VIBE family. The latest in SLICK Pro products have been designed around efficiency in order to get the best sounding and best priced Pro speakers possible, for example with the 6 inch Midrange having a sensitivity of 98dB!! this allows the speaker to play at huge volumes even on lower power. The range includes 6 and 8 inch midranges and a 3.7 inch Bullet tweeter, all with a unique to car audio rubberised gasket and well known SLICK design concept.  
 

Specifications

  • Model – SLICKPRO6M-V0
  • Type – Pro audio midrange.
  • Configuration – 1-way
  • Speaker Size – 6.6” (167mm)
  • Peak/RMS Power – 275W / 125W
  • Sensitivity – 98dB
  • Frequency Response – 100Hz – 9kHz
  • Impedance – 4Ω
  • Mounting Depth – 1.9” (73mm)
  • Mounting Diameter – 5.7” (144mm)
  • Grill Included – No
  • Recommended Amp – POWERBOX250.2-V0
  • 50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
  • No CD or DVD Player, Plays Bluetooth/USB, MP3, WMA, FM/AM, Digital Media from Smart Phones
  • Compatible with Audio out from Smart Phones and MP3 Players
  • USB, Aux, Input
  • Front & Rear Pre Amp Outputs
  • Detachable Front Panel, Wireless Remote, USB Charging
  • Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly
 
  • One 12" Woofer with DUAL 4 ohm Voice Coil
  • 2600 Watts MAX 1300 Watts RMS Power Handling
  • 88dB Sensitivity, 28 Hz Resonant Frequency
  • Polypropylene & Paper Cone and Rubber Surround
  • Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
BOSS Audio Systems BAB8 Amplified Car Subwoofer
  • Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
 
Break Your Subwoofer In Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.  
  • 8-inch 800-Watt subwoofer
  • Class A/B built-in amplifier
  • MOSFET power supply
  • RCA & speaker level input
  • Phase control
  • Bass boost
  • Low pass filter
  • Remote subwoofer control
 
  • 50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
  • Plays Bluetooth/CD/USB, MP3, WMA, FM/AM, Digital Media from Smart Phones
  • Compatible with Audio out from Smart Phones and MP3 Players
  • USB, Aux, Input
  • Front & Rear Pre Amp Outputs
  • Wireless Remote
  • Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly

Competition 10" pro audio speaker

The BDPRO10M-V9: BlackDeath 10 Inch Pro Audio Midrange woofer is designed with excellent mid-bass response in mind. A semi-pressed paper cone has high sensitivity and low moving mass for monstrous output. Dual roll cloth surround offers fast, precise dampening of the cone with great bass response. The BlackHole Dustcap increases the effective cone area for higher SPL creating extreme volume.

BlackDeath range

VIBE Audio’s BlackDeath range is all about taking things to the extreme and creating products so crazy they have no right to exist. BlackDeath isn’t just about pushing the boundaries of audio innovation, it’s about annihilating them. For many years people have been asking for coaxial and component speakers that are worthy to wear the BlackDeath logo, and after extensive development Vibe are proud to release the BlackDeath Pro Audio range. Derived from PA speaker design, BlackDeath Pro Audio speakers are capable of immense sound pressure levels, meaning volume like you’ve never heard before. Ideal for competition use or for those who just want to play their music loud and proud.  
 

Specifications

  • Model : BlackDeath Pro 8M
  • Configuration : 1 Way
  • Speaker Size : 10″ (2254mm)
  • RMS Power : 275 watts
  • Peak Power : 825 watts
  • Minimum Input : 125 watts
  • Sensitivity : 97 dB
  • Freq. Response : 55 Hz – 3.5 kHz
  • Impedance : 4 Ohm
  • Mounting Depth : 4.2″ (106mm)
  • Mounting Diameter: 9.25″ (235mm)
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information