Description |
- OPTISOUNDAUTO8A-V2: Slimline and Underseat applications
- Amp and Wiring Kit included
- Ported Enclosure Technology
| Chaos Exxtreme 6.5" 3-Way 300W Full Range Speakers. (Sold in Pairs) | Boss Audio System Phantom - 12" DUAL Voice Coil (4 Ohm) 2600W Subwoofer. (Sold Single) P129DC | Onyx 4" 4-Way 250W Full Range Speakers. (Sold in Pairs) | Chaos Exxtreme 6" x 9" 3-Way 400W Full Range Speakers. (Sold in Pairs) | BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space |
Content | OPTISOUNDAUTO8A-V2: Slimline 8 inch Active bass enclosure
OPTISOUNDAUTO8A-V2 super slim bass enclosures are designed to fit in even the smallest of spaces whilst still having the big bass presence that people have come to expect from VIBE.
Small, sleek and lightweight, these enclosures will fit into any available space, behind a seat, under seat or tucked away in your luggage compartment. The OptiSound enclosures are perfect for those looking to add bass to their system but want a stealth install or don’t have the space to spare for a large enclosure.
Specifications
- Type enclosure. Configuration: vented
- Height 3” (75mm). Width 10.6” (270mm). Depth 15” (380mm)
- Weight 4.66 kg
- Driver LiteAir 8
- Impedance 4Ω
- RMS Power 300 watts
- Peak Power 900 watts
- TurboPort labyrinth slot port
- Characteristics tight bass.
Additional information
Weight |
6.84 kg |
Dimensions |
48 × 33.5 × 10.5 cm |
|
- Full Range 6.5" 3-Way Speaker Pair
- 300 Watts MAX 150 Watts RMS Power Handling per Pair
- 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter and 1 inch Polyimide Dome Midrange Per Speaker
- Sold in Pairs
|
- One 12" Woofer with DUAL 4 ohm Voice Coil
- 2600 Watts MAX 1300 Watts RMS Power Handling
- 88dB Sensitivity, 28 Hz Resonant Frequency
- Polypropylene & Paper Cone and Rubber Surround
- Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
|
- Full Range 4" 4-Way Speaker Pair
- 250 Watts MAX 125 Watts RMS Power Handling per Pair
- 120 Hz to 20 kHz Frequency Response and 90dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 2 Tweeters and 1.18 inch Mylar Cone Midrange Per Speaker
- Sold in Pairs
|
- Full Range 6" x 9" 3-Way Speaker Pair
- 400 Watts MAX 200 Watts RMS Power Handling per Pair
- 50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter and 2 inch Polyimide Cone Midrange Per Speaker
- Sold in Pairs
|
BOSS Audio Systems BAB8 Amplified Car Subwoofer
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
|
Reviews
There are no reviews yet.