The all new SLICKC10A-V0 is our largest diameter shallow subwoofer ever, loaded with a 10” subwoofer and an installation depth of just 75mm.
This incredible and compact enclosure can be used when space is at a premium but bass is a requirement.
We designed and engineered this product to produce strong accurate bass but keeping in mind a space saving mentality.
The depth of the bass comes from a cast Aluminium enclosure to ensure no resonance and waste of energy alongside a woofer designed specifically to work in this enclosure, dynamic bass from little space.
Specifications
Model – SLICKC10A-V0
Driver – SLICK10S
Type – Active bass enclosure
Peak/RMS Power – 540W/180W
Impedance – 4Ω
Dimensions (H x W x D) – 2.9” x 10.2” x 13.6” (73mm x 260mm x 345mm)
Configuration – 2nd order acoustic suspension
Enclosure Type – Slim Fit Bass Enclosure
Cast Aluminium chassis provides maximum durability and keeps enclosure weight to a minimum.
Auto sense circuit allows the amplifier to turn on and off when using high level input without the need for a remote turn on wire.
0° / 180° Phase shift control.
Remote bass control allows the amplifier level to be adjusted from the front of the vehicle.
Low and high level input allows easy connection to both factory systems or aftermarket headunits.
Reviews
There are no reviews yet.
Be the first to review “SLICKC10A-V0 – Active Underseat Subwoofer” Cancel reply
The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
Content
SLICKC10A-V0
The all new SLICKC10A-V0 is our largest diameter shallow subwoofer ever, loaded with a 10” subwoofer and an installation depth of just 75mm.
This incredible and compact enclosure can be used when space is at a premium but bass is a requirement.
We designed and engineered this product to produce strong accurate bass but keeping in mind a space saving mentality.
The depth of the bass comes from a cast Aluminium enclosure to ensure no resonance and waste of energy alongside a woofer designed specifically to work in this enclosure, dynamic bass from little space.
Specifications
Model – SLICKC10A-V0
Driver – SLICK10S
Type – Active bass enclosure
Peak/RMS Power – 540W/180W
Impedance – 4Ω
Dimensions (H x W x D) – 2.9” x 10.2” x 13.6” (73mm x 260mm x 345mm)
Configuration – 2nd order acoustic suspension
Enclosure Type – Slim Fit Bass Enclosure
Cast Aluminium chassis provides maximum durability and keeps enclosure weight to a minimum.
Auto sense circuit allows the amplifier to turn on and off when using high level input without the need for a remote turn on wire.
0° / 180° Phase shift control.
Remote bass control allows the amplifier level to be adjusted from the front of the vehicle.
Low and high level input allows easy connection to both factory systems or aftermarket headunits.
One 12" Woofer with DUAL 4 ohm Voice Coil
1600 Watts MAX 800 Watts RMS Power Handling
85dB Sensitivity, 26 Hz Resonant Frequency
Polypropylene & Paper Cone and Rubber Surround
Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
Blue LED Illumination
50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
Plays Bluetooth/CD, FM/AM, Digital Media from Smart Phones
Compatible with Audio out from Smart Phones and MP3 Players
Aux, Input
Front & Rear Pre Amp Outputs
Wireless Remote
Bluetooth Hands Free, Make and receive cal
One 10" Woofer with DUAL 4 ohm Voice Coil
2100 Watts MAX 1050 Watts RMS Power Handling
88dB Sensitivity, 34 Hz Resonant Frequency
Poly Injection Cone and Rubber Surround
Works in .65 CuFt Sealed or 1 CuFt Ported enclosure
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
PULSE12-V0 - 12 Inch Subwoofer
Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.
High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.
Reviews
There are no reviews yet.