| Description |
- SLICKPRO37T-V0: PRO audio bullet tweeter
- Titanium diaphragm
- Cast aluminium flange
- Spade terminal for easy connection
- 25mm voice coil
| BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space | Phantom 6.5" 4-Way 400W Full Range Speakers. (Sold in Pairs) | Double-DIN, DVD Player 6.2" Touchscreen Bluetooth |
- PULSE4-V0: Pulse 4 Inch Coaxial Speaker
- Easy upgrade
- Complete with grills
| Phantom - 12" DUAL Voice Coil (4 Ohm) 1600W Subwoofer. (Sold Single) |
| Content | SLICKPRO37T-V0: VIBE Slick 3.7 INCH Pro Bullet Tweeter
SLICKPRO37T-V0: For over 10 years we have produced high end Pro audio in our Blackdeath range which has always been the loudest and best looking around! So it was about time we added Pro audio across the rest if the VIBE family.
The latest in SLICK Pro products have been designed around efficiency in order to get the best sounding and best priced Pro speakers possible, for example with the 6 inch Midrange having a sensitivity of 98dB!! this allows the speaker to play at huge volumes even on lower power. The range includes 6 and 8 inch midranges and a 3.7 inch Bullet tweeter, all with a unique to car audio rubberised gasket and well known SLICK design concept.
Specifications
- Model – SLICKPRO37T-V0
- Type – Pro audio tweeter
- Configuration – 1-way
- Speaker Size – 3.7” (98mm)
- Peak/RMS Power – 225W / 75W
- Sensitivity – 102dB
- Frequency Response – 2kHz – 20kHz
- Impedance – 4Ω
- Mounting Depth – 1.5” (37mm)
- Mounting Diameter – 2.8” (72mm)
- Grill Included – No
- Recommended Amp – POWERBOX250.2-V0
|
BOSS Audio Systems BAB8 Amplified Car Subwoofer
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
|
- Full Range 6.5" 4-Way Speaker Pair
- 400 Watts MAX 200 Watts RMS Power Handling per Pair
- 65 Hz to 22 kHz Frequency Response and 85dB Sensitivity
- Polypropylene Woofer Cone and Rubber Surround
- 2 Tweeters and 1.25 inch Mylar Cone Midrange Per Speaker
- Sold in Pairs
|
- 80 Watts x 4 Max Power, RBDS Tuner, Balance/Fader/Bass/Treble and Preset built-in EQ
- Plays Bluetooth/DVD/CD/USB/SD, VCD, WMA, JPEG, FM/AM, Digital Media from Smart Phones
- Compatible with Audio out from Smart Phones and MP3 Players
- USB, SD, Aux, AV, Rear Camera, Steering Wheel Control Input
- Video, Front, Rear & Sub Pre Amp Outputs
- Wireless Remote, USB Charging
- Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly
| Entry level 4 inch Coaxial speaker with IMPP Cone
The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
- 4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
- Peak Power output – 40 Watts
- RMS Frequency Response: 100HZ – 20KHZ
- Sensitivity 83dB
- Mounting Diameter 3.7” (95MM)
- Mounting Depth 1.7” (44MM)
- Impedance : 4 OHMS
- Spade Terminal allows easy connection of speaker Cable.
- PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
- Torsion basket featuring snap on mounting tabs for greater installation flexibility.
- IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
|
- One 12" Woofer with DUAL 4 ohm Voice Coil
- 1600 Watts MAX 800 Watts RMS Power Handling
- 85dB Sensitivity, 26 Hz Resonant Frequency
- Polypropylene & Paper Cone and Rubber Surround
- Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
- Blue LED Illumination
|
Reviews
There are no reviews yet.