BOSS Audio Single Din LED Illumination PD12LED

AED 550.00
admin

Phantom – 12″ DUAL Voice Coil (4 Ohm) 1600W Subwoofer. (Sold Single)

Out stock

Out of stock

Category:
  • One 12″ Woofer with DUAL 4 ohm Voice Coil
  • 1600 Watts MAX 800 Watts RMS Power Handling
  • 85dB Sensitivity, 26 Hz Resonant Frequency
  • Polypropylene & Paper Cone and Rubber Surround
  • Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
  • Blue LED Illumination

Reviews

There are no reviews yet.

Be the first to review “BOSS Audio Single Din LED Illumination PD12LED”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsBOSS Audio Single Din LED Illumination PD12LED removeBOSS Audio Car Speakers - Sold in Pairs, Easy Mounting 5.25" 200 Watts CH5520 removeBOSS Audio Systems BAB8 Amplified Car Subwoofer removeBOSS Audio Systems P65.4C Car Speakers - 350 Watts Of Power Per Pair And 175 Watts Each, 6 x 9 Inch, Full Range, 2 Way, Sold in Pairs, removeBOSS Audio Systems R94 Car Speakers 500 Watt Per Pair, 6 x 9 Inch, Full Range, 4 Way Sold in Pairs removePULSE12-V0 – 12 Inch Subwoofer remove
ImageBOSS Audio Systems BAB8 Amplified Car SubwooferBOSS Audio Systems R94 500 Watt Per Pair, 6 x 9 Inch, Full Range, 4 Way Car Speakers Sold in Pairs
SKU
Rating
PriceAED 550.00AED 89.00AED 499.00AED 139.00AED 139.00AED 477.00
Stock

Out of stock

Out of stock

AvailabilityOut of stockOut of stock
Add to cart

DescriptionPhantom - 12" DUAL Voice Coil (4 Ohm) 1600W Subwoofer. (Sold Single)Chaos Exxtreme 5.25" 2-Way 200W Full Range Speakers. (Sold in Pairs)

BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

Phantom 6.5" 4-Way 400W Full Range Speakers. (Sold in Pairs)BOSS Audio Systems R94 Car Speakers 500 Watt Per Pair, 6 x 9 Inch, Full Range, 4 Way Sold in PairsThe PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
Content
  • One 12" Woofer with DUAL 4 ohm Voice Coil
  • 1600 Watts MAX 800 Watts RMS Power Handling
  • 85dB Sensitivity, 26 Hz Resonant Frequency
  • Polypropylene & Paper Cone and Rubber Surround
  • Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
  • Blue LED Illumination
  • Full Range 5.25" 2-Way Speaker Pair
  • 200 Watts MAX 100 Watts RMS Power Handling per Pair
  • 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 1 Tweeter Per Speaker
  • Sold in Pairs
 
BOSS Audio Systems BAB8 Amplified Car Subwoofer
  • Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
 
Break Your Subwoofer In Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.  
  • 8-inch 800-Watt subwoofer
  • Class A/B built-in amplifier
  • MOSFET power supply
  • RCA & speaker level input
  • Phase control
  • Bass boost
  • Low pass filter
  • Remote subwoofer control
 
  • Full Range 6.5" 4-Way Speaker Pair
  • 400 Watts MAX 200 Watts RMS Power Handling per Pair
  • 65 Hz to 22 kHz Frequency Response and 85dB Sensitivity
  • Polypropylene Woofer Cone and Rubber Surround
  • 2 Tweeters and 1.25 inch Mylar Cone Midrange Per Speaker
  • Sold in Pairs
BOSS Audio Systems R94 Car Speakers 500 Watt Per Pair, 6 x 9 Inch, Full Range, 4 Way Sold in Pairs
  • Full Range 6" x 9" 4-Way  Car Speakers Pair
  • 500 Watts MAX 250 Watts RMS Power Handling per Pair
  • 50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 2 Tweeters and 2.5 inch Mylar Dome Midrange Per Car Speakers
  • Sold in Pairs

PULSE12-V0 - 12 Inch Subwoofer

Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.

The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.

High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.

 

Specification

  • - 350 Watts RMS
  • - 1050 Watts Peak
  • - 2100 Watts SPL (BURP)
  • - Single 4Ω
  • - Pressed paper Cone
  • - PP Dome Dustcap
  • - 1.5″ OFC Voice Coil
  • - Poly Cotton Spider
  • - Bumped Backplate
  • - Butyl Foam Surround
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information