Description |
- SLICKCBR12TA-V0: Twin 12″ High Output Bass Enclosure Enclosure
- Actively Powered with 800 watts
- VIBE Turbo ports
| The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE. | BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space |
- PULSE4-V0: Pulse 4 Inch Coaxial Speaker
- Easy upgrade
- Complete with grills
| Chaos Exxtreme 6" x 9" 3-Way 400W Full Range Speakers. (Sold in Pairs) | Chaos Exxtreme 5.25" 2-Way 200W Full Range Speakers. (Sold in Pairs) |
Content | SLICKCBR12TA-V0: Turbo Port 12 Inch Bass Enclosure with Active amplifier
The new Vibe Slick CBR (SLICKCBR12TA-V0) Active is the loudest twin 12 bass enclosure we have ever built.
With a our patented Turbo ports and power wedge enclosure paired with a powerful Dual voice coil subwoofer the enclosure design offers serious bass.
The 2020 CBR offers a market leading amplifier solution in our revolutionary terminal amplifier, taking all the technology from our best ever selling amp the POWERBOX400.1 and adapting it into our Terminal amp becoming the most powerful active amplifier solution in the world!.
Keeping all the functions and even easier to install! Low and High level input, gain level control and option for a bass remote!
All compatible with our Rapid Fit wiring kit.
Specifications
- 2400w Peak
- 800w RMS
- Impedance 1 ohm
- 13.9″ x 34.4″ x 16.7″ (354 x 900 x 425mm)
- 4th order bass reflex enclosure
| PULSE12-V0 - 12 Inch Subwoofer
Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.
High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.
Specification
- - 350 Watts RMS
- - 1050 Watts Peak
- - 2100 Watts SPL (BURP)
- - Single 4Ω
- - Pressed paper Cone
- - PP Dome Dustcap
- - 1.5″ OFC Voice Coil
- - Poly Cotton Spider
- - Bumped Backplate
- - Butyl Foam Surround
|
BOSS Audio Systems BAB8 Amplified Car Subwoofer
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
| Entry level 4 inch Coaxial speaker with IMPP Cone
The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
- 4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
- Peak Power output – 40 Watts
- RMS Frequency Response: 100HZ – 20KHZ
- Sensitivity 83dB
- Mounting Diameter 3.7” (95MM)
- Mounting Depth 1.7” (44MM)
- Impedance : 4 OHMS
- Spade Terminal allows easy connection of speaker Cable.
- PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
- Torsion basket featuring snap on mounting tabs for greater installation flexibility.
- IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
|
- Full Range 6" x 9" 3-Way Speaker Pair
- 400 Watts MAX 200 Watts RMS Power Handling per Pair
- 50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter and 2 inch Polyimide Cone Midrange Per Speaker
- Sold in Pairs
|
- Full Range 5.25" 2-Way Speaker Pair
- 200 Watts MAX 100 Watts RMS Power Handling per Pair
- 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter Per Speaker
- Sold in Pairs
|
Reviews
There are no reviews yet.