Description |
- Non pressed paper cone
- Dual roll foam surround
- 25mm voice coil
- Polycotton spiders
- Spade terminal for easy connection
- Unique Rubber gasket
| Phantom - 10" DUAL Voice Coil (4 Ohm) 2100W Subwoofer. (Sold Single) | Chaos Exxtreme 6.5" 3-Way 300W Full Range Speakers. (Sold in Pairs) | BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space |
- BlackDeath 10 Inch Pro Audio Midrange high output driver
- Alloy Gasket included
- Sold in Singles
| Phantom - 12" DUAL Voice Coil (4 Ohm) 1600W Subwoofer. (Sold Single) |
Content | VIBE SLICKPRO8M-V0: 8 Inch Pro Audio Midrange
SLICKPRO8M-V0: For over 10 years we have produced high end Pro audio in our Blackdeath range which has always been the loudest and best looking around! So it was about time we added Pro audio across the rest if the VIBE family.
The latest in SLICK Pro products have been designed around efficiency in order to get the best sounding and best priced Pro speakers possible, for example with the 6 inch Midrange having a sensitivity of 98dB!! this allows the speaker to play at huge volumes even on lower power. The range includes 6 and 8 inch midranges and a 3.7 inch Bullet tweeter, all with a unique to car audio rubberised gasket and well known SLICK design concept.
Specifications
- Model – SLICKPRO8M-V0
- Type – Pro audio midrange.
- Configuration – 1-way
- Speaker Size – 8.1” (206mm)
- Peak/RMS Power – 450W / 150W
- Sensitivity – 98dB
- Frequency Response – 100Hz – 9kHz
- Impedance – 4Ω
- Mounting Depth – 3.4” (85mm)
- Mounting Diameter – 7.2” (183mm)
- Grill Included – No
- Recommended Amp – POWERBOX250.2-V0
|
- One 10" Woofer with DUAL 4 ohm Voice Coil
- 2100 Watts MAX 1050 Watts RMS Power Handling
- 88dB Sensitivity, 34 Hz Resonant Frequency
- Poly Injection Cone and Rubber Surround
- Works in .65 CuFt Sealed or 1 CuFt Ported enclosure
|
- Full Range 6.5" 3-Way Speaker Pair
- 300 Watts MAX 150 Watts RMS Power Handling per Pair
- 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter and 1 inch Polyimide Dome Midrange Per Speaker
- Sold in Pairs
|
BOSS Audio Systems BAB8 Amplified Car Subwoofer
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
| Competition 10" pro audio speaker
The BDPRO10M-V9: BlackDeath 10 Inch Pro Audio Midrange woofer is designed with excellent mid-bass response in mind. A semi-pressed paper cone has high sensitivity and low moving mass for monstrous output. Dual roll cloth surround offers fast, precise dampening of the cone with great bass response. The BlackHole Dustcap increases the effective cone area for higher SPL creating extreme volume.
BlackDeath range
VIBE Audio’s BlackDeath range is all about taking things to the extreme and creating products so crazy they have no right to exist. BlackDeath isn’t just about pushing the boundaries of audio innovation, it’s about annihilating them.
For many years people have been asking for coaxial and component speakers that are worthy to wear the BlackDeath logo, and after extensive development Vibe are proud to release the BlackDeath Pro Audio range.
Derived from PA speaker design, BlackDeath Pro Audio speakers are capable of immense sound pressure levels, meaning volume like you’ve never heard before. Ideal for competition use or for those who just want to play their music loud and proud.
Specifications
- Model : BlackDeath Pro 8M
- Configuration : 1 Way
- Speaker Size : 10″ (2254mm)
- RMS Power : 275 watts
- Peak Power : 825 watts
- Minimum Input : 125 watts
- Sensitivity : 97 dB
- Freq. Response : 55 Hz – 3.5 kHz
- Impedance : 4 Ohm
- Mounting Depth : 4.2″ (106mm)
- Mounting Diameter: 9.25″ (235mm)
|
- One 12" Woofer with DUAL 4 ohm Voice Coil
- 1600 Watts MAX 800 Watts RMS Power Handling
- 85dB Sensitivity, 26 Hz Resonant Frequency
- Polypropylene & Paper Cone and Rubber Surround
- Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
- Blue LED Illumination
|
Reviews
There are no reviews yet.