HomeMicrophonesWired MicrophonesTONOR Dynamic Karaoke Microphone for Singing with 16.4ft XLR Cable, Metal Handheld Mic Compatible with Karaoke Machine/Speaker/Amp/Mixer for Karaoke Singing, Speech, Wedding and Outdoor Activity
View cart “FIFINE USB Microphone 669B” has been added to your cart.
TONOR Dynamic Karaoke Microphone for Singing with 16.4ft XLR Cable, Metal Handheld Mic Compatible with Karaoke Machine/Speaker/Amp/Mixer for Karaoke Singing, Speech, Wedding and Outdoor Activity
Specifications Type: TONOR Dynamic Karaoke Microphone for Singing with 16.4ft XLR Cable. Dynamic Microphone Frequency Response: 80Hz-12KHz Polar Pattern: Supper Cardioid Connector: 3-pin gold plated balanced XLR male Diameter: 2.09 in./ 53mm Total length: 16.5ft Weight: 12 oz./ 340g Operation Guide: 1.Insert microphone plug in the microphone “MIC” socket 2.Take the microphone switch to the “ON” position and adjust the voice controller. 3.Take the switch to the “OFF” position when the microphone not use. Notes: 1.Keep far away between the microphone and loudspeaker. 2.Don’t strike the microphone, avoid to damage the parts of microphone. 3.Don’t put the microphone on high temperature and moisture place. 4.Take the microphone to the best distance(5-10cm DIRECT to mouth) so that to avoid noise. 5.Please speak directly into the top of the microphone to hear the most clear and loud sound. Package Included: 1x Dynamic Microphone 1x Sponge Cover 1x Cable 1x Manual
16.5ft XLR to 1/4 in Cable: Allowing the karaoke microphone to be directly used for the speaker, amplifier or mixer. Superior construction of the mic cable can isolate external electromagnetic interference and make the sound transmission more clearly.
Premium Construction: All metal construction ensures long life. This TONOR Dynamic Microphone is constructed out of premium hard metal for durability and strong resistance to impact.
Easy to Use: No battery required for operation. An external on/off switch on it for easy control of audio (Push up is ON, push down is OFF). When the microphone is not used, you can turn it OFF using the switch without unplugging the cable.
Cardioid Dynamic Microphone: wired dynamic microphone features a cardioid pickup pattern for greater gain while simultaneously minimizing background feedback. Perfect for karaoke machine, stage performance, wedding, church, interview, etc.
What You Get: wired dynamic microphone comes in a full kit with all the right essentials – 1 microphone, 1 XLR cable, 1 foam mic cover and 1 instruction manual to get you started.
Technical Details
Item Weight: 340 g
Product Dimensions: 5.9 x 13.3 x 24.7 cm; 340 Grams
Item model number: TN492BL
Color Name: Black
Compatible Devices: Speaker
Connector Type: 6.35 mm Jack
Material Type: Acrylonitrile Butadiene Styrene
Size: M
Hardware Platform: Karaoke Machine
Power Source: Corded Electric
Reviews
There are no reviews yet.
Be the first to review “TONOR Dynamic Karaoke Microphone for Singing with 16.4ft XLR Cable, Metal Handheld Mic Compatible with Karaoke Machine/Speaker/Amp/Mixer for Karaoke Singing, Speech, Wedding and Outdoor Activity” Cancel reply
Specifications Type: TONOR Dynamic Karaoke Microphone for Singing with 16.4ft XLR Cable. Dynamic Microphone Frequency Response: 80Hz-12KHz Polar Pattern: Supper Cardioid Connector: 3-pin gold plated balanced XLR male Diameter: 2.09 in./ 53mm Total length: 16.5ft Weight: 12 oz./ 340g Operation Guide: 1.Insert microphone plug in the microphone "MIC" socket 2.Take the microphone switch to the "ON" position and adjust the voice controller. 3.Take the switch to the "OFF" position when the microphone not use. Notes: 1.Keep far away between the microphone and loudspeaker. 2.Don't strike the microphone, avoid to damage the parts of microphone. 3.Don't put the microphone on high temperature and moisture place. 4.Take the microphone to the best distance(5-10cm DIRECT to mouth) so that to avoid noise. 5.Please speak directly into the top of the microphone to hear the most clear and loud sound. Package Included: 1x Dynamic Microphone 1x Sponge Cover 1x Cable 1x Manual
FIFINE Wireless Lavalier Lapel Microphone System for Phones/Tablets, 2.4GHz Cordless Condenser Omnidirectional Clip-on Mic, USB C Receiver, for Video, Interview, Vlog, YouTube, Recording-M6
USB Microphone,FIFINE Metal Condenser Recording Microphone for Laptop MAC or Windows Cardioid Studio Recording Vocals, Voice Overs,Streaming Broadcast and YouTube Videos
Fifine T669pro3 RGB Bundle Gaming Microphone
FetHead Phantom is an ultra-low noise, high-quality, in-line microphone preamplifier. It provides improved sound for condenser microphones. Small, compact, but powerful, Fethead Phantom utilizes tried and true FET technology to deliver up to 18dB of clean boost. No more cranking your mic preamp and adding unwanted noise to get your microphone to an acceptable volume. Boost your microphone!
FetHead Germaniumis high quality in-line microphone preamplifier. It provides a punchy and direct, ‘larger than life’ germanium sound for dynamic and ribbon microphones. Sounding full and rich it is reminiscent of much higher priced vintage gear, making FetHead Ge's desirable coloration a really great addition to (interface) preamps which sound rather neutral. Our FetHead Germaniumutilizes tried and true FET technology combined with a hand selected “New Old Stock” Germanium transistor to deliver 29dB's of germanium flavored boost.
Content
About this item
16.5ft XLR to 1/4 in Cable: Allowing the karaoke microphone to be directly used for the speaker, amplifier or mixer. Superior construction of the mic cable can isolate external electromagnetic interference and make the sound transmission more clearly.
Premium Construction: All metal construction ensures long life. This TONOR Dynamic Microphone is constructed out of premium hard metal for durability and strong resistance to impact.
Easy to Use: No battery required for operation. An external on/off switch on it for easy control of audio (Push up is ON, push down is OFF). When the microphone is not used, you can turn it OFF using the switch without unplugging the cable.
Cardioid Dynamic Microphone: wired dynamic microphone features a cardioid pickup pattern for greater gain while simultaneously minimizing background feedback. Perfect for karaoke machine, stage performance, wedding, church, interview, etc.
What You Get: wired dynamic microphone comes in a full kit with all the right essentials - 1 microphone, 1 XLR cable, 1 foam mic cover and 1 instruction manual to get you started.
Technical Details
Item Weight: 340 g
Product Dimensions: 5.9 x 13.3 x 24.7 cm; 340 Grams
Item model number: TN492BL
Color Name: Black
Compatible Devices: Speaker
Connector Type: 6.35 mm Jack
Material Type: Acrylonitrile Butadiene Styrene
Size: M
Hardware Platform: Karaoke Machine
Power Source: Corded Electric
https://youtu.be/1p06oGPc6Mg
FIFINE Wireless Lavalier Lapel Microphone System for Phones/Tablets, 2.4GHz Cordless Condenser Omnidirectional Clip-on Mic, USB C Receiver, for Video, Interview, Vlog, YouTube, Recording-M6
The level of the smartphone camera rockets up, but the internal microphone bears no relation in that good way. Thus, relying too much on the internal microphone results in massively degraded audio and heavily restricted scenarios.
To make better use of the high-performance cameras and tackle those drawbacks, you should take serious consideration of coupling with a full-featured wireless lav mic.
Because of the direction and the sensitivity of a built-in microphone, its audio quality is nowhere near the external ones’. You will get much less distortion and most importantly less noticeable hollowness and echo.
And you can run a more creative live on TikTok or Facebook by leaving your device on the desk and shooting from a distance.
FIFINE M6 wireless lavalier microphone expectedly makes up for the shortfalls of the smartphone internal mic, and it does more than that.
There is not a single bit of complexity was added to the setup. To capture audio into your phone, you do not have to have a mixer, either to worry about making the system work, it just works. Such simplicity is what the M6 presents you with. Small and inconspicuous receiver, convenience and minimalism of a transmitter plus microphone system.
Just connect the USB-C receiver to your Android smartphone, turn on the transmitter and they will automatically pair in a second. For not spoiling the straightforward setup with any adapter, it is better to use the system exclusively on USB-C mobiles, tablets, laptops or PCs. That means the action cameras, portable vlog cameras, DSLR cameras that have a USB-C jack are not compatible.
Launch an app for going live on YouTube/Instagram/TikTok, video conferencing, or audio recording, and you’re good to go. The LED light at the bottom of the receiver gives you a clear idea of the connection status.
*Plug and play Usb microphone with 5.9-Foot USB Cable included for computer PC laptop that connects directly to USB port for record music, computer singing or podcast. Easy to use and install on Mac or PC. Compatible with Xbox and Phones.
*Solid sturdy metal construction design computer microphone with stable tripod stand is convenient when you are doing voice overs or livestreams on YouTube.
*Recording microphone with additional volume knob itself has a louder output and is more sensitive, your voice would be heard well enough when gaming, skyping or voice recording.
*USB-powered design condenser microphone for recording no need the 48v Phantom power supply, work well with Cortana, Discord, voice chat and voice recognition.
*Cardioid polar pattern condenser microphone for computer captures your voice properly, produce clear smooth and crisp sound without static noise. Great for gamers/streamers at isolating the sounds from the main source and separating them from any background noise. Does the job well for streaming broadcast, OBS and teamspeak.
*Applications- For Discord OBS Teamspeak Twitch. Amazing mic with Zoom Webex Amazon Chime. Great for Audacity. Kindly remind that you need to disable the sound activated recording function of the application (like "Automatically adjust volume" of Zoom) if you do not want your recording volume to decrease or jump around
K669
Fifine T669pro3 RGB Bundle Gaming Microphone.
Tap to Mute sensor with LED indicator (RED and GREEN)
The volume knob convenient gain control ,Easily adjust your mic sensitivity.
Built In anti vibration shock mount
There will be pop filter in parcel will help smooth out some of those pesky percussive noises that periodically punctuate your speech
One plug and play microphone for streaming on PC , PS4 , PS5 , MAC.
Various RGB lightning - Equipped with three modes , static and gradient lights, You can choose the color you like or let it gradually change
3.5mm headphone jack
Preamp for condenser microphones
FetHead Phantom is an ultra-low noise, high quality, in-line microphone preamplifier. It provides improved sound for condenser microphones. Small, compact, but powerful, Fethead Phantom utilizes tried and true FET technology to deliver up to 18dB of clean boost. No more cranking your mic preamp and adding unwanted noise to get your microphone to an acceptable volume. Boost your microphone!
Which microphones benefit
FetHead Phantom is specially designed for condenser microphones. It works very well with all condenser microphones. FetHead Phantom is also an indispensable tool for mobile recording and a real upgrade for camera microphone preamps, because it lowers the noise floor.
Operation
Your Fethead Phantom will latch straight onto any XLR equipped microphone, or anywhere else in the signal path between microphone and preamp/mixer. The electronics are housed in a robust metal chassis with a balanced female XLR input and a balanced male XLR output, rugged enough for use at home, in the studio or on tour.
Phantom power distribution
FetHead's Phantom circuit uses 48V phantom power but also passes it on from its input to the microphone. Your condenser mic is powered with the same phantom power.
Specifications:
Preamp for condenser microphones
Low noise Class A FET amplifier
18 dB amplification (@3000 Ohm load)
Balanced XLR input/output
Lots of headroom
Frequency response 30hz-100khz (+/- 1dB)
Z-in 1000 Ω
Circuit is powered with 24-48V phantom power
Preamp with germanium harmonics
FetHead Germaniumis high quality in-line microphone preamplifier. It provides a punchy and direct, ‘larger than life’ germanium sound for dynamic and ribbon microphones. Sounding full and rich it is reminiscent of much higher priced vintage gear, making FetHead Ge's desirable coloration a really great addition to (interface) preamps which sound rather neutral. Our FetHead Germaniumutilizes tried and true FET technology combined with a hand selected “New Old Stock” Germanium transistor to deliver 29dB's of germanium flavored boost.
Germanium Flavor
Germanium transistors were widely used in earliest transistor designs by Neve, EMI, Telefunken, and Fairchild, and have developed a reputation for a decidedly vintage mojo that remains sought after today.
We created a novel hybrid circuit that consists of low noise JFETs and a hand-selected ‘new old stock’ germanium transistor to take full advantage of the "Germanium" sound and at the same time achieve the same sonic quality we are known for. A low impedance output buffer provides output drive to long cables.
Operation
Your Fethead Germanium will latch straight onto any XLR equipped microphone, or anywhere else in the signal path between microphone and preamp/mixer. The electronics are housed in a robust metal chassis with a balanced female XLR input and a balanced male XLR output, rugged enough for use at home, in the studio or on tour.
Protects the microphone
Some older ribbon microphones do not tolerate phantom power. Fethead uses phantom power to power its circuitry, but doesn’t pass phantom power to the microphone, so rest assured your ribbon mics are safe.
Reviews
There are no reviews yet.