FetHead Phantom is an ultra-low noise, high-quality, in-line microphone preamplifier. It provides improved sound for condenser microphones. Small, compact, but powerful, Fethead Phantom utilizes tried and true FET technology to deliver up to 18dB of clean boost. No more cranking your mic preamp and adding unwanted noise to get your microphone to an acceptable volume. Boost your microphone!
FetHead Phantom is an ultra-low noise, high quality, in-line microphone preamplifier. It provides improved sound for condenser microphones. Small, compact, but powerful, Fethead Phantom utilizes tried and true FET technology to deliver up to 18dB of clean boost. No more cranking your mic preamp and adding unwanted noise to get your microphone to an acceptable volume. Boost your microphone!
Which microphones benefit
FetHead Phantom is specially designed for condenser microphones. It works very well with all condenser microphones. FetHead Phantom is also an indispensable tool for mobile recording and a real upgrade for camera microphone preamps, because it lowers the noise floor.
Operation
Your Fethead Phantom will latch straight onto any XLR equipped microphone, or anywhere else in the signal path between microphone and preamp/mixer. The electronics are housed in a robust metal chassis with a balanced female XLR input and a balanced male XLR output, rugged enough for use at home, in the studio or on tour.
Phantom power distribution
FetHead’s Phantom circuit uses 48V phantom power but also passes it on from its input to the microphone. Your condenser mic is powered with the same phantom power.
Specifications:
Preamp for condenser microphones
Low noise Class A FET amplifier
18 dB amplification (@3000 Ohm load)
Balanced XLR input/output
Lots of headroom
Frequency response 30hz-100khz (+/- 1dB)
Z-in 1000 Ω
Circuit is powered with 24-48V phantom power
Reviews
There are no reviews yet.
Be the first to review “TRITON Fethead PHANTOM” Cancel reply
FetHead Phantom is an ultra-low noise, high-quality, in-line microphone preamplifier. It provides improved sound for condenser microphones. Small, compact, but powerful, Fethead Phantom utilizes tried and true FET technology to deliver up to 18dB of clean boost. No more cranking your mic preamp and adding unwanted noise to get your microphone to an acceptable volume. Boost your microphone!
BOSS Audio Systems Elite B653 6.5 Inch Car Speakers - 300 Watts of Power Per Pair, 150 Watts Each, 3 Way, Sold In Pairs, Easy Mounting
FIFINE Wireless Lavalier Lapel Microphone System for Phones/Tablets, 2.4GHz Cordless Condenser Omnidirectional Clip-on Mic, USB C Receiver, for Video, Interview, Vlog, YouTube, Recording-M6
FIFINE USB Condenser Microphone for Windows PC, Laptop, MAC, PS4
FIFINE Studio Condenser USB Microphone Computer PC Microphone Kit with Adjustable Scissor Arm Stand Shock Mount for Instruments Voice Overs Recording Podcasting YouTube Karaoke Gaming Streaming
Yamaha F310 is an excellent quality instrument at a truly affordable price. Its dreadnought style body provides loud acoustic tone with comfortable playability.
Content
Preamp for condenser microphones
FetHead Phantom is an ultra-low noise, high quality, in-line microphone preamplifier. It provides improved sound for condenser microphones. Small, compact, but powerful, Fethead Phantom utilizes tried and true FET technology to deliver up to 18dB of clean boost. No more cranking your mic preamp and adding unwanted noise to get your microphone to an acceptable volume. Boost your microphone!
Which microphones benefit
FetHead Phantom is specially designed for condenser microphones. It works very well with all condenser microphones. FetHead Phantom is also an indispensable tool for mobile recording and a real upgrade for camera microphone preamps, because it lowers the noise floor.
Operation
Your Fethead Phantom will latch straight onto any XLR equipped microphone, or anywhere else in the signal path between microphone and preamp/mixer. The electronics are housed in a robust metal chassis with a balanced female XLR input and a balanced male XLR output, rugged enough for use at home, in the studio or on tour.
Phantom power distribution
FetHead's Phantom circuit uses 48V phantom power but also passes it on from its input to the microphone. Your condenser mic is powered with the same phantom power.
Specifications:
Preamp for condenser microphones
Low noise Class A FET amplifier
18 dB amplification (@3000 Ohm load)
Balanced XLR input/output
Lots of headroom
Frequency response 30hz-100khz (+/- 1dB)
Z-in 1000 Ω
Circuit is powered with 24-48V phantom power
Cone: made from polyurethane, The B653 6.5-Inch car speakers provide a resilient and durable material that can offer great sound with the advantage of long-lasting speakers
Voice coil: our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material gives our speakers The advantage of longer play times with lower weights
Surround: we use rubber in a lot of our speakers. It has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear
STAMPED BASKET: The stamped basket offers a strong and rigid platform allowing the listener to hear clean and clear
Tweeter: a piezoelectric tweeter is more resistant to overloads and can be used without a crossover due to its’ electrical property
https://youtu.be/1p06oGPc6Mg
FIFINE Wireless Lavalier Lapel Microphone System for Phones/Tablets, 2.4GHz Cordless Condenser Omnidirectional Clip-on Mic, USB C Receiver, for Video, Interview, Vlog, YouTube, Recording-M6
The level of the smartphone camera rockets up, but the internal microphone bears no relation in that good way. Thus, relying too much on the internal microphone results in massively degraded audio and heavily restricted scenarios.
To make better use of the high-performance cameras and tackle those drawbacks, you should take serious consideration of coupling with a full-featured wireless lav mic.
Because of the direction and the sensitivity of a built-in microphone, its audio quality is nowhere near the external ones’. You will get much less distortion and most importantly less noticeable hollowness and echo.
And you can run a more creative live on TikTok or Facebook by leaving your device on the desk and shooting from a distance.
FIFINE M6 wireless lavalier microphone expectedly makes up for the shortfalls of the smartphone internal mic, and it does more than that.
There is not a single bit of complexity was added to the setup. To capture audio into your phone, you do not have to have a mixer, either to worry about making the system work, it just works. Such simplicity is what the M6 presents you with. Small and inconspicuous receiver, convenience and minimalism of a transmitter plus microphone system.
Just connect the USB-C receiver to your Android smartphone, turn on the transmitter and they will automatically pair in a second. For not spoiling the straightforward setup with any adapter, it is better to use the system exclusively on USB-C mobiles, tablets, laptops or PCs. That means the action cameras, portable vlog cameras, DSLR cameras that have a USB-C jack are not compatible.
Launch an app for going live on YouTube/Instagram/TikTok, video conferencing, or audio recording, and you’re good to go. The LED light at the bottom of the receiver gives you a clear idea of the connection status.
Fool-proof USB installation: plug-and-play USB Microphone on Mac, Windows and PS4.
Compact size will not block your face during streaming. Get rid of bulky plastic headset.
All-metal body enhances professional feeling and even protects the mic from drop damage.
Cardioid pattern reduces irritating fan or keyboard noise for crystal clear communication.
Your computer's perfect partner: Improve the Sound of Your Audio Projects.
【USB Output】Enables simple setup. USB Microphone Kit provide a direct convenient plug-and-play connection to Mac and Windows computers without any additional hardware for recording vocals, podcasts and Skype. It's never been easier to get high-quality sound for your voice and computer-based audio recordings.(◆◆Incompatible with Xbox and Phones◆◆)
【Excellent Sound Quality】With rugged construction for durable performance, the vocal microphone offers a wide frequency response and handles high SPLs with ease.Ideal for project/home-studio applications.The cardioid condenser capsule offers crystal-clear audio for communicating, creating and recording.Comes ready to go with a desktop mic stand and 2.5M USB cable,you're guaranteed to get great-sounding results.
【Durable Arm Set】Studio USB Microphone with versatile and sturdy broadcast suspension boom scissor arm gives you great tools for capturing your voice in a podcast or voiceover.The Double Pop Filter provides two layers of dissipation, removes the rush of air caused by vocal plosives,minimizing the popping sounds that can compromise your recording is great for studio as well as home use.
【Easy to Attach】The streaming microphone adjustable boom studio scissor Arm Stand features a heavy-duty combo mount that consists of a sturdy C-clamp and a detachable desktop mount.With 13" fixed horizontal arm and offers a 30" reach.The low-profile,table-hugging design allows on-air talent to perform without facial obstruction to record podcasts or make dubbing sounds for videos, use voice chat in online games or doing business on Skype.
【The Accessory Package Includes】The scissor arm stand is made out of all steel construction, sturdy and durable, a studio-grade shock mount,a double pop filter, premium 8.2' USB cable,a bonus tripod stand, a microphone for podcast recording, a user manual.
The Yamaha MI F310 NT Acoustic Guitar is a full size, dreadnought style acoustic guitar that is suitable for music enthusiasts. The stringed instrument produces a big tone with plenty of sustain. It has a spruce top and Meranti sides and back that afford a well balanced tonality. The guitar’s rosewood bridge and fingerboard produce a brighter, twangy sound. The hardwood of the bridge and the fingerboard also feels smooth to your touch. The tonewood of the neck, the back, and the sides stands out prominently against the natural shade of the spruce.
KEY FEATURES
Comfortable Feel
For Looks That Rock
COMFORTABLE FEEL
The Yamaha MI F310 NT Acoustic Guitar’s dreadnought style design makes this instrument extremely comfortable to use. The guitar with steel strings is ideal for beginners of all ages and gives crisp and melodic sound with every strum.
FOR LOOKS THAT ROCK
The Yamaha MI F310 NT Acoustic Guitar features a tasteful combination of materials to make your experience larger than life. That's not all, it even gives you a cool look to go with your style. The instrument has a glossy rosewood bridge and fingerboard that stands out prominently against the natural shade of the spruce.
Reviews
There are no reviews yet.