Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
Reviews
There are no reviews yet.
Be the first to review “BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver” Cancel reply
BOSS Audio Systems R94 Car Speakers 500 Watt Per Pair, 6 x 9 Inch, Full Range, 4 Way Sold in Pairs
Onyx 4" 4-Way 250W Full Range Speakers. (Sold in Pairs)
BOSS Audio Systems NX654 Car Speakers - 400 Watts Per Pair, 200 Watts Each, 6.5 Inch, Full Range, 4 Way, Sold in Pairs
Onyx 5.25" 4-Way 300W Full Range Speakers. (Sold in Pairs)
Content
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
Competition 6" pro audio speaker
The BDPRO6M-V9: BlackDeath 6 Inch Pro Audio Midrange component woofer is designed with excellent mid-bass response in mind. Semi-pressed paper cone has high sensitivity and low moving mass for monstrous output Dual roll cloth surround offers fast, precise dampening of the cone with great bass response. The BlackHole Dustcap increases effective cone area for higher SPL creating extreme volume.
Blackdeath range
VIBE Audio’s BlackDeath range is all about taking things to the extreme and creating products so crazy they have no right to exist. BlackDeath isn’t just about pushing the boundaries of audio innovation, it’s about annihilating them.
For many years people have been asking for coaxial and component speakers that are worthy to wear the BlackDeath logo, and after extensive development Vibe are proud to release the BlackDeath Pro Audio range. Derived from PA speaker design, BlackDeath Pro Audio speakers are capable of immense sound pressure levels, meaning volume like you’ve never heard before. Ideal for competition use or for those who just want to play their music loud and proud.
Specifications
Model : BlackDeath Pro 6M
Configuration : 1 Way
Speaker Size : 6″ (170mm)
RMS Power : 175 watts
Peak Power : 525 watts
Minimum Input : 75 watts
Sensitivity : 97 dB
Freq. Response : 75 Hz – 10 kHz
Impedance : 4 Ohm
Mounting Depth : 2.7″ (68mm)
Mounting Diameter: 5.7″ (146mm)
Voice Coil Diameter : 2″ (38mm)
Magnet Weight : 34 oz
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
Sold as single speaker
BOSS Audio Systems R94 Car Speakers 500 Watt Per Pair, 6 x 9 Inch, Full Range, 4 Way Sold in Pairs
Full Range 6" x 9" 4-Way Car Speakers Pair
500 Watts MAX 250 Watts RMS Power Handling per Pair
50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
2 Tweeters and 2.5 inch Mylar Dome Midrange Per Car Speakers
Sold in Pairs
Before making your purchase, find out what type of speakers you will be replacing. You can simply measure the existing speakers and go from there. If you do not have any to begin with, a local Audio/Video shop can guide you with a few simple questions about your vehicle. Most of the time you will be able to drop them right in with little to no alterations needed. Pay close attention to the RMS power handling of the speakers you are purchasing. This is the continuous power that a speaker can handle without distorting. Your head unit will have to have the proper number of speaker outputs compared to how many speakers you plan to hook up to it, as well as sufficient power from the built-in amplifier. Sometimes though, a separate or external amplifier will have to be employed so that your speakers get the adequate power they need for optimal performance.
Full Range, 4-Way, 6” x 9”
Dimensions: Length 9.5” Width x 6.8” x Height 3.3”
Impedance: 4 Ohms, Frequency Response: 50Hz – 20KHz
Sensitivity: 92 dB @ 1 W/1 m
Cone: Poly Injection, Midrange: 2.5” Mylar Dome
Surround: Rubber, Basket: Stamped, Tweeter: 1” Dome & 0.5” Piezo
Poly Injection Cone
Polypropylene is a resilient and durable manufactured material. It allows for maximum flexibility that produces great sounding speakers.
Rubber Surround
Impermeable to air, rubber has the ability to endure or resist exposure to the many types of weather fronts. Rubber has many different applications. We use it for the surrounds in a many of our speakers to connect the cone to the basket
Dome Tweeter
Dome tweeters have improved sound dispersion and the shape radiates sound with a wider dispersion pattern than the semi-dome design. Since high-frequency sound waves are very directional, a wider dispersion of the sound waves will give you a larger "sweet spot" to work with when setting up your system
Piezoelectric Tweeter
Piezoelectric tweeters are resistant to overloads that would normally destroy most high frequency drivers and they can be used without a crossover due to their electrical properties. The active element is basically a piece of polarized material (i.e. some parts of the molecule are positively charged, while other parts of the molecule are negatively charged)
Full Range 4" 4-Way Speaker Pair
250 Watts MAX 125 Watts RMS Power Handling per Pair
120 Hz to 20 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
2 Tweeters and 1.18 inch Mylar Cone Midrange Per Speaker
Sold in Pairs
Cone Made from polyurethane, the NX654 6. 5 inch car speakers provide a resilient and durable material that can offer great sound with the advantage of long lasting speakers
Voice Coil Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. This gives our speakers the advantage of longer play times with lower weights
Surround Rubber has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear
Basket A die cast frame can absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures
Tweeter The dome shape radiates sound with a wider dispersion pattern than the semi dome design. Since high frequency sound waves are very directional, a wider dispersion of the sound waves will give you a larger "sweet spot".Specs Impedance: 4 Ohms, Frequency: 65 Hz to 20 kHz, Dimensions: 7" x 7" x 3", Mounting Depth: 2. 3", Mounting hole: 5. 6". BOSS Audio Systems provides a powerful 3 year platinum online dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality
Tweeter: Mylar Dome
Generally, the dome tweeter is a step up from the semi-dome tweeter, primarily because of improved sound dispersion. The dome shape radiates sound with a wider dispersion pattern than the semi-dome design. Since high-frequency sound waves are very directional, a wider dispersion of the sound waves will give you a larger 'sweet spot' to work with when setting up your system.
ONYX NX654
The classic style performance of the ONYX (NX) Series are a rare combination indeed. The custom designed poly injected cones and regimented linear travel provide an accuracy of sound production transporting the exact sonic experience the artist intended in the recording studio, directly into your vehicle.
Full Range 400 Watt 6.5” 4-way Speakers
Power Handling (peak): 200 Watts x 2
Dimensions: L 7” x W 7” x H 3”
Mounting depth: 2.25”
Impedance: 4 Ohms
Frequency Response: 65Hz – 20KHz
Sensitivity: 90 dB @ 1 W/1 m
Voice Coil: 1” Aluminum
Basket Structure: Cast
Tweeter: .75” Mylar Dome
Cone: Poly Injection
Polyurethane is categorized as a Polymer. It is a resilient, flexible and a durable manufactured material that allows for maximum flexibility that produces great sounding speakers lasting you a long time.
Surround: Rubber
Impermeable to air, rubber has the ability to endure or resist exposure to the many types of weather fronts. Rubber has many different applications. We use it for the surrounds in a many of our speakers to connect the cone to the basket.
Voice Coil: High Temperature
Our speakers are capable of higher or elevated temperature strength and fatigue properties that will increase performance and efficiency of heavy duty play time through lower weight and higher operating temperatures.
Full Range 5.25" 4-Way Speaker Pair
300 Watts MAX 150 Watts RMS Power Handling per Pair
95 Hz to 20 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
2 Tweeters and .98 inch Mylar Cone Midrange Per Speaker
Reviews
There are no reviews yet.