The BLACKAIR12D2-V7: Black Air 12 inch Dual 2Ω Subwoofer is for those who want sound quality to be loud. The new Black Air subwoofers offer dynamic, accurate bass but with the extra volume you want for showing off. Using double stacked magnets, Vibe’s Blackhole dust caps and high roll foam surrounds, the Black Air 12 inch Dual 2Ω Subwoofer offers beautiful bass but with the aggression of the larger competition subwoofers.
Available in: 10, 12 and 15″ variants that offer a solution for everyone with power ranging from 600w to 1000w RMS.
BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space
BOSS Audio Systems R94 Car Speakers 500 Watt Per Pair, 6 x 9 Inch, Full Range, 4 Way Sold in Pairs
Single-DIN, CD/MP3 Player Bluetooth
Content
SQL 12 inch subwoofer with High Roll Surround
The BLACKAIR12D2-V7: Black Air 12 inch Dual 2Ω Subwoofer is for those who want sound quality to be loud. The new Black Air subwoofers offer dynamic, accurate bass but with the extra volume you want for showing off. Using double stacked magnets, Vibe’s Blackhole dust caps and high roll foam surrounds, the Black Air 12 inch Dual 2Ω Subwoofer offers beautiful bass but with the aggression of the larger competition subwoofers.
Available in: 10, 12 and 15″ variants that offer a solution for everyone with power ranging from 600w to 1000w RMS.
The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
Peak Power output – 40 Watts
RMS Frequency Response: 100HZ – 20KHZ
Sensitivity 83dB
Mounting Diameter 3.7” (95MM)
Mounting Depth 1.7” (44MM)
Impedance : 4 OHMS
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
BOSS Audio Systems BAB8 Amplified Car Subwoofer
Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Break Your Subwoofer In
Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.
8-inch 800-Watt subwoofer
Class A/B built-in amplifier
MOSFET power supply
RCA & speaker level input
Phase control
Bass boost
Low pass filter
Remote subwoofer control
Amplified Space Saver
A built-in amplifier powers the 8-inch subwoofer. No need to have a subwoofer housed in a box AND a separate amplifier. If you have a small cabin to work with, the BAB8 will provide the rich bass that every sound system cannot do without.
Remote Subwoofer Control
A wired remote subwoofer control at your fingertips gives you control, so when the need hits… so does your BASS
One 12" Woofer with DUAL 4 ohm Voice Coil
1600 Watts MAX 800 Watts RMS Power Handling
85dB Sensitivity, 26 Hz Resonant Frequency
Polypropylene & Paper Cone and Rubber Surround
Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
Blue LED Illumination
BOSS Audio Systems R94 Car Speakers 500 Watt Per Pair, 6 x 9 Inch, Full Range, 4 Way Sold in Pairs
Full Range 6" x 9" 4-Way Car Speakers Pair
500 Watts MAX 250 Watts RMS Power Handling per Pair
50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
2 Tweeters and 2.5 inch Mylar Dome Midrange Per Car Speakers
Sold in Pairs
Before making your purchase, find out what type of speakers you will be replacing. You can simply measure the existing speakers and go from there. If you do not have any to begin with, a local Audio/Video shop can guide you with a few simple questions about your vehicle. Most of the time you will be able to drop them right in with little to no alterations needed. Pay close attention to the RMS power handling of the speakers you are purchasing. This is the continuous power that a speaker can handle without distorting. Your head unit will have to have the proper number of speaker outputs compared to how many speakers you plan to hook up to it, as well as sufficient power from the built-in amplifier. Sometimes though, a separate or external amplifier will have to be employed so that your speakers get the adequate power they need for optimal performance.
Full Range, 4-Way, 6” x 9”
Dimensions: Length 9.5” Width x 6.8” x Height 3.3”
Impedance: 4 Ohms, Frequency Response: 50Hz – 20KHz
Sensitivity: 92 dB @ 1 W/1 m
Cone: Poly Injection, Midrange: 2.5” Mylar Dome
Surround: Rubber, Basket: Stamped, Tweeter: 1” Dome & 0.5” Piezo
Poly Injection Cone
Polypropylene is a resilient and durable manufactured material. It allows for maximum flexibility that produces great sounding speakers.
Rubber Surround
Impermeable to air, rubber has the ability to endure or resist exposure to the many types of weather fronts. Rubber has many different applications. We use it for the surrounds in a many of our speakers to connect the cone to the basket
Dome Tweeter
Dome tweeters have improved sound dispersion and the shape radiates sound with a wider dispersion pattern than the semi-dome design. Since high-frequency sound waves are very directional, a wider dispersion of the sound waves will give you a larger "sweet spot" to work with when setting up your system
Piezoelectric Tweeter
Piezoelectric tweeters are resistant to overloads that would normally destroy most high frequency drivers and they can be used without a crossover due to their electrical properties. The active element is basically a piece of polarized material (i.e. some parts of the molecule are positively charged, while other parts of the molecule are negatively charged)
50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
Plays Bluetooth/CD, FM/AM, Digital Media from Smart Phones
Compatible with Audio out from Smart Phones and MP3 Players
Reviews
There are no reviews yet.