| Description | The Edge EDPRO 65G-E6 is a set of mid-range speakers that are designed to give you a clear and distinct bass with a soft rubber composite material | Phantom 6.5" 4-Way 400W Full Range Speakers. (Sold in Pairs) | Chaos Exxtreme 6" x 9" 3-Way 400W Full Range Speakers. (Sold in Pairs) | Phantom - 10" DUAL Voice Coil (4 Ohm) 2100W Subwoofer. (Sold Single) | BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space | Chaos Exxtreme 5.25" 2-Way 200W Full Range Speakers. (Sold in Pairs) |
| Content | Edge EDPRO 65G-E6 MID RANGE WOOFERS 300W MAX POWER
Edge Car Audio is setting the streets on fire around the globe with there high quality product range and design. The Edge EDPRO 65G-E6 is a set of mid-range speakers that are designed to give you a clear and distinct bass with a soft rubber composite material that will give you smooth linear bass curves that are pleasing to the ear. Mid-range speakers are an integral element that determines the high sound quality and the perfect functioning of your car's speaker system.
Core Features:
- STRUCTURE : 1-PASS
- RMS POWER: 150 WATT
- MAX POWER: 300 WATT
- Impedance: 3.2 OHM
- INSTALLATION DEPTH: 60MM
- INSTALLATION DIAMETER: 143MM
- PAIR OF WOOFERS
Technical Specs
| Diameter / Size
|
6.5 "(16.5cm) |
| Re (Nominal Resistance / Impedance), Ohm (Ω)
|
3.2 |
| Number of stripes |
one |
Power
| Max (Peak Power), W |
300 |
| RMS (rated power), W
|
150 |
Thiel Small Parameters
| SPL (sensitivity), dB |
93,4 |
Materials
| Diffuser material |
Pressed pulp |
| Suspension material |
the cloth |
| Magnetic System Material |
Ferrite |
Mounting dimensions
| Mounting depth mm |
60 |
| Mounting diameter mm |
143 |
| Coil Diameter |
1,5 |
Other
| Grids included |
Yes |
| Basket type |
Cast |
|
- Full Range 6.5" 4-Way Speaker Pair
- 400 Watts MAX 200 Watts RMS Power Handling per Pair
- 65 Hz to 22 kHz Frequency Response and 85dB Sensitivity
- Polypropylene Woofer Cone and Rubber Surround
- 2 Tweeters and 1.25 inch Mylar Cone Midrange Per Speaker
- Sold in Pairs
|
- Full Range 6" x 9" 3-Way Speaker Pair
- 400 Watts MAX 200 Watts RMS Power Handling per Pair
- 50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter and 2 inch Polyimide Cone Midrange Per Speaker
- Sold in Pairs
|
- One 10" Woofer with DUAL 4 ohm Voice Coil
- 2100 Watts MAX 1050 Watts RMS Power Handling
- 88dB Sensitivity, 34 Hz Resonant Frequency
- Poly Injection Cone and Rubber Surround
- Works in .65 CuFt Sealed or 1 CuFt Ported enclosure
|
BOSS Audio Systems BAB8 Amplified Car Subwoofer
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
|
- Full Range 5.25" 2-Way Speaker Pair
- 200 Watts MAX 100 Watts RMS Power Handling per Pair
- 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter Per Speaker
- Sold in Pairs
|
Reviews
There are no reviews yet.