| Description | 
 	Powered Line Output converterLOC4-V5: 4 channel with remote outputAutosense | Chaos Exxtreme 6" x 9" 3-Way 400W Full Range Speakers. (Sold in Pairs) | Phantom 6.5" 4-Way 400W Full Range Speakers. (Sold in Pairs) | BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space | 
 	PULSE4-V0: Pulse 4 Inch Coaxial SpeakerEasy upgradeComplete with grills | 
 	BlackDeath 10 Inch Pro Audio Midrange high output driverAlloy Gasket includedSold in Singles | 
| Content | 4 Channel Powered Line output ConverterLOC4-V5: 4 channel adjustable line convertor. Designed to convert speaker level audio into line level audio for use with aftermarket amplifiers, the LOC will also detect the presence of an audio signal and then generate a +12V output that can be used to turn on an aftermarket amplifier.
 Additional information
| Weight | 12.32 kg |  
| Dimensions | 41.5 × 28.5 × 25 cm |  | 
 	Full Range 6" x 9" 3-Way Speaker Pair400 Watts MAX 200 Watts RMS Power Handling per Pair50 Hz to 20 kHz Frequency Response and 92dB SensitivityPoly Injection Woofer Cone and Rubber Surround1 Tweeter and 2 inch Polyimide Cone Midrange Per SpeakerSold in Pairs | 
 	Full Range 6.5" 4-Way Speaker Pair400 Watts MAX 200 Watts RMS Power Handling per Pair65 Hz to 22 kHz Frequency Response and 85dB SensitivityPolypropylene Woofer Cone and Rubber Surround2 Tweeters and 1.25 inch Mylar Cone Midrange Per SpeakerSold in Pairs | BOSS Audio Systems BAB8 Amplified Car Subwoofer 
 	Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwooferPulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliableVariable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputsLow Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiersVariable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it. | Entry level 4 inch Coaxial speaker with IMPP ConeThe PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
 Specifications
 	4”(100mm) 2-way high efficiency coaxial speaker 120 WattPeak Power output – 40 WattsRMS Frequency Response: 100HZ – 20KHZSensitivity 83dBMounting Diameter 3.7” (95MM)Mounting Depth 1.7” (44MM)Impedance : 4 OHMS 
 	Spade Terminal allows easy connection of speaker Cable.PEI Tweeter – PEI dome tweeters deliver extended high frequency response.Torsion basket featuring snap on mounting tabs for greater installation flexibility.IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction. | Competition 10" pro audio speakerThe BDPRO10M-V9: BlackDeath 10 Inch Pro Audio Midrange woofer is designed with excellent mid-bass response in mind. A semi-pressed paper cone has high sensitivity and low moving mass for monstrous output. Dual roll cloth surround offers fast, precise dampening of the cone with great bass response. The BlackHole Dustcap increases the effective cone area for higher SPL creating extreme volume.BlackDeath rangeVIBE Audio’s BlackDeath range is all about taking things to the extreme and creating products so crazy they have no right to exist. BlackDeath isn’t just about pushing the boundaries of audio innovation, it’s about annihilating them.
For many years people have been asking for coaxial and component speakers that are worthy to wear the BlackDeath logo, and after extensive development Vibe are proud to release the BlackDeath Pro Audio range.
Derived from PA speaker design, BlackDeath Pro Audio speakers are capable of immense sound pressure levels, meaning volume like you’ve never heard before. Ideal for competition use or for those who just want to play their music loud and proud.
 Specifications
 	Model : BlackDeath Pro 8MConfiguration : 1 WaySpeaker Size : 10″ (2254mm)RMS Power : 275 wattsPeak Power : 825 wattsMinimum Input : 125 wattsSensitivity : 97 dB 
 	Freq. Response : 55 Hz – 3.5 kHzImpedance : 4 OhmMounting Depth : 4.2″ (106mm)Mounting Diameter: 9.25″ (235mm) | 
Reviews
There are no reviews yet.