Featuring a Dual 2ohm VC set up this subwoofer is capable of 300 watts RMS and a 1200 Watt SPL Burp
This subwoofer features our single piece technology cone made from IMPP for increased strength and rigidity and a clean tight bass response, this is tied in with our heritage VIBE styled brushed alloy effect surround.
Featuring light weight soft parts this subwoofer offers great volume at low power due to its efficiency engineered construction
Specifications
300 Watts RMS
900 Watts Peak
1200 Watts SPL (BURP)
Dual 2Ω
Pressed paper Cone
Fibre Blackhole Dustcap
1.5″ OFC Voice Coil
Poly Cotton Spider
Bumped Backplate
Butyl Foam Surround
Reviews
There are no reviews yet.
Be the first to review “PULSE12-V7 – 12 Inch Subwoofer” Cancel reply
Chaos Exxtreme 5.25" 2-Way 200W Full Range Speakers. (Sold in Pairs)
BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space
Phantom 6.5" 2-Way 500W Component Speakers. (Sold in Pairs)
PULSE4-V0: Pulse 4 Inch Coaxial Speaker
Easy upgrade
Complete with grills
Model: BDPRO4T-V0
Pro Audio compression horn driver
107dB Sensitivity
150 Watts RMS
300 Watts Max
1.5kHz – 20kHz Response
Content
PULSE12-V7 - 12 Inch Subwoofer
VIBE Presents the PULSE 12 inch subwoofer
Featuring a Dual 2ohm VC set up this subwoofer is capable of 300 watts RMS and a 1200 Watt SPL Burp
This subwoofer features our single piece technology cone made from IMPP for increased strength and rigidity and a clean tight bass response, this is tied in with our heritage VIBE styled brushed alloy effect surround.
Featuring light weight soft parts this subwoofer offers great volume at low power due to its efficiency engineered construction
Specifications
300 Watts RMS
900 Watts Peak
1200 Watts SPL (BURP)
Dual 2Ω
Pressed paper Cone
Fibre Blackhole Dustcap
1.5″ OFC Voice Coil
Poly Cotton Spider
Bumped Backplate
Butyl Foam Surround
Full Range 5.25" 2-Way Speaker Pair
200 Watts MAX 100 Watts RMS Power Handling per Pair
100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
1 Tweeter Per Speaker
Sold in Pairs
BOSS Audio Systems BAB8 Amplified Car Subwoofer
Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Break Your Subwoofer In
Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.
8-inch 800-Watt subwoofer
Class A/B built-in amplifier
MOSFET power supply
RCA & speaker level input
Phase control
Bass boost
Low pass filter
Remote subwoofer control
Amplified Space Saver
A built-in amplifier powers the 8-inch subwoofer. No need to have a subwoofer housed in a box AND a separate amplifier. If you have a small cabin to work with, the BAB8 will provide the rich bass that every sound system cannot do without.
Remote Subwoofer Control
A wired remote subwoofer control at your fingertips gives you control, so when the need hits… so does your BASS
Component 6.5" 2-Way Speaker Pair
500 Watts MAX 250 Watts RMS Power Handling per Pair
65 Hz to 20 kHz Frequency Response and 94dB Sensitivity
Electroplate Injection Woofer Cone and Rubber Surround
1 Tweeter Per Speaker
Sold in Pairs
Entry level 4 inch Coaxial speaker with IMPP Cone
The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
Peak Power output – 40 Watts
RMS Frequency Response: 100HZ – 20KHZ
Sensitivity 83dB
Mounting Diameter 3.7” (95MM)
Mounting Depth 1.7” (44MM)
Impedance : 4 OHMS
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
Reviews
There are no reviews yet.