PULSE69-V0: Entry level 6×9″ inch Coaxial speakers with IMPP Cone
The PULSE69-V0 coaxial speakers are the new entry level range from VIBE. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
Type: Coaxial
Configuration: 3 way
Size: 6 x 9 inches
RMS Power: 100W
Peak Power: 300W
Max Power: 600W
Frequency Response: 45Hz – 20kHz
Impedance: 4 Ohms
Mounting Depth: 78mm
Mounting Diameter: 144mm x 216mm
Recommended Amp: POWERBOX80.4-V0
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
Reviews
There are no reviews yet.
Be the first to review “PULSE69-V0: PULSE 6×9″ Inch Coaxial Speakers” Cancel reply
BlackDeath 10 Inch Pro Audio Midrange high output driver
Alloy Gasket included
Sold in Singles
The new range of Vibe Slick speakers are the most efficient Vibe speaker to date.
Chaos Exxtreme 6" x 9" 2-Way 350W Full Range Speakers. (Sold in Pairs)
Onyx 5.25" 4-Way 300W Full Range Speakers. (Sold in Pairs)
Content
PULSE69-V0: Entry level 6x9" inch Coaxial speakers with IMPP Cone
The PULSE69-V0 coaxial speakers are the new entry level range from VIBE. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
Type: Coaxial
Configuration: 3 way
Size: 6 x 9 inches
RMS Power: 100W
Peak Power: 300W
Max Power: 600W
Frequency Response: 45Hz – 20kHz
Impedance: 4 Ohms
Mounting Depth: 78mm
Mounting Diameter: 144mm x 216mm
Recommended Amp: POWERBOX80.4-V0
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
Competition 10" pro audio speaker
The BDPRO10M-V9: BlackDeath 10 Inch Pro Audio Midrange woofer is designed with excellent mid-bass response in mind. A semi-pressed paper cone has high sensitivity and low moving mass for monstrous output. Dual roll cloth surround offers fast, precise dampening of the cone with great bass response. The BlackHole Dustcap increases the effective cone area for higher SPL creating extreme volume.
BlackDeath range
VIBE Audio’s BlackDeath range is all about taking things to the extreme and creating products so crazy they have no right to exist. BlackDeath isn’t just about pushing the boundaries of audio innovation, it’s about annihilating them.
For many years people have been asking for coaxial and component speakers that are worthy to wear the BlackDeath logo, and after extensive development Vibe are proud to release the BlackDeath Pro Audio range.
Derived from PA speaker design, BlackDeath Pro Audio speakers are capable of immense sound pressure levels, meaning volume like you’ve never heard before. Ideal for competition use or for those who just want to play their music loud and proud.
Specifications
Model : BlackDeath Pro 8M
Configuration : 1 Way
Speaker Size : 10″ (2254mm)
RMS Power : 275 watts
Peak Power : 825 watts
Minimum Input : 125 watts
Sensitivity : 97 dB
Freq. Response : 55 Hz – 3.5 kHz
Impedance : 4 Ohm
Mounting Depth : 4.2″ (106mm)
Mounting Diameter: 9.25″ (235mm)
British Engineered 1 Inch Component Tweeter
The secret weapon is the incredible tweeter. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.
Specification
- 2″ Tweeter, 150w Peak
- 50w RMS, 1 way
- impedance 4 ohm
- Sensitivity: 94dB
- Frequency response: 1.5kHz – 25kHz
- Mounting depth: 0.5″ (12mm)
- mounting diameter: 1.5″ (39mm)
- Grill included
Full Range 6" x 9" 2-Way Speaker Pair
350 Watts MAX 175 Watts RMS Power Handling per Pair
50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
1 Tweeter Per Speaker
Sold in Pairs
Full Range 5.25" 4-Way Speaker Pair
300 Watts MAX 150 Watts RMS Power Handling per Pair
95 Hz to 20 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
2 Tweeters and .98 inch Mylar Cone Midrange Per Speaker
Reviews
There are no reviews yet.