| Description |
- 12″ High Output Bass Enclosure Enclosure
- Designed to work with Powerbox 400.1M
- VIBE Turbo port
| Chaos Exxtreme 5.25" 2-Way 200W Full Range Speakers. (Sold in Pairs) | Phantom 6.5" 4-Way 400W Full Range Speakers. (Sold in Pairs) | BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space | Phantom 6.5" 2-Way 500W Component Speakers. (Sold in Pairs) | BOSS Audio Systems NX654 Car Speakers - 400 Watts Per Pair, 200 Watts Each, 6.5 Inch, Full Range, 4 Way, Sold in Pairs |
| Content |
Turbo Ported Bass Enclosure with 12 inch Subwoofer
PULSECBR12-V7: The new Vibe Pulse CBR enclosure takes the radical approach of removing the integrated amplifier and replacing it with a separate unit, this gives several advantages. The enclosure design can now be focused only on the volume needed for the woofer rather than losing space to an internal power source. Using a separate amplifier means that sound quality is at the forefront. Vibe has developed an inline Powerbox Micro amplifier and ISOAWK kit (available separately) that can be purchased with the enclosure to make it compatible with an ISO T harness to plug into the existing stereo loom in the vehicle. this supplies audio signal and power and earth meaning there is no need to connect a separate cable through to the vehicles battery, just plug and play.
Specifications
- PULSECBR12-V7: 900w Peak
- 300w RMS
- Impedance 2 ohm
- 13.9″ x 21.6″ x 16.7″ (354 x 550 x 425mm)
- 4th order bass reflex enclosure
|
- Full Range 5.25" 2-Way Speaker Pair
- 200 Watts MAX 100 Watts RMS Power Handling per Pair
- 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter Per Speaker
- Sold in Pairs
|
- Full Range 6.5" 4-Way Speaker Pair
- 400 Watts MAX 200 Watts RMS Power Handling per Pair
- 65 Hz to 22 kHz Frequency Response and 85dB Sensitivity
- Polypropylene Woofer Cone and Rubber Surround
- 2 Tweeters and 1.25 inch Mylar Cone Midrange Per Speaker
- Sold in Pairs
|
BOSS Audio Systems BAB8 Amplified Car Subwoofer
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
|
- Component 6.5" 2-Way Speaker Pair
- 500 Watts MAX 250 Watts RMS Power Handling per Pair
- 65 Hz to 20 kHz Frequency Response and 94dB Sensitivity
- Electroplate Injection Woofer Cone and Rubber Surround
- 1 Tweeter Per Speaker
- Sold in Pairs
|
- Cone Made from polyurethane, the NX654 6. 5 inch car speakers provide a resilient and durable material that can offer great sound with the advantage of long lasting speakers
- Voice Coil Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. This gives our speakers the advantage of longer play times with lower weights
- Surround Rubber has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear
- Basket A die cast frame can absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures
- Tweeter The dome shape radiates sound with a wider dispersion pattern than the semi dome design. Since high frequency sound waves are very directional, a wider dispersion of the sound waves will give you a larger "sweet spot".Specs Impedance: 4 Ohms, Frequency: 65 Hz to 20 kHz, Dimensions: 7" x 7" x 3", Mounting Depth: 2. 3", Mounting hole: 5. 6". BOSS Audio Systems provides a powerful 3 year platinum online dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality
|
Reviews
There are no reviews yet.