| Description |
- SLICK6-V7: 6″ High-efficiency speaker
- Designed to replace factory speaker
- Unique wideband tweeter
| Chaos Exxtreme 6.5" 3-Way 300W Full Range Speakers. (Sold in Pairs) | Chaos Exxtreme 6" x 9" 2-Way 350W Full Range Speakers. (Sold in Pairs) | BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space | Chaos Exxtreme 6" x 9" 3-Way 400W Full Range Speakers. (Sold in Pairs) |
- PULSE4-V0: Pulse 4 Inch Coaxial Speaker
- Easy upgrade
- Complete with grills
|
| Content | SLICK6-V7: 6 inch Coaxial Speaker with oversized central tweeter
The new range of Vibe Slick (SLICK6-V7) speakers are the most efficient Vibe speaker to date. The woofer features a super lightweight paper composite cone and foam surround, a single layer spider and perfectly balanced voice coil. The secret weapon is the incredible range of tweeters, a 50mm tweeter on the 5.25″, 5″ x 7″ and 6.5″ models and a 40mm tweeter across the rest of the range. This provides an extended bandwidth and high level of efficiency. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.
Specifications
- 6.5″ 2 way coaxial speaker
- 240w Peak
- 80w RMS
- Price Tip Mittleklasse, Car & Hifi Magazine
- Sensitivity: 94db
- Frequency response: 54Hz – 25 kHz
- Impedance 4 ohm
- Mounting depth: 2.4″ (61mm)
- Mounting diameter: 5.6″ (142mm)
- Grill included
|
- Full Range 6.5" 3-Way Speaker Pair
- 300 Watts MAX 150 Watts RMS Power Handling per Pair
- 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter and 1 inch Polyimide Dome Midrange Per Speaker
- Sold in Pairs
|
- Full Range 6" x 9" 2-Way Speaker Pair
- 350 Watts MAX 175 Watts RMS Power Handling per Pair
- 50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter Per Speaker
- Sold in Pairs
|
BOSS Audio Systems BAB8 Amplified Car Subwoofer
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
|
- Full Range 6" x 9" 3-Way Speaker Pair
- 400 Watts MAX 200 Watts RMS Power Handling per Pair
- 50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter and 2 inch Polyimide Cone Midrange Per Speaker
- Sold in Pairs
| Entry level 4 inch Coaxial speaker with IMPP Cone
The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
- 4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
- Peak Power output – 40 Watts
- RMS Frequency Response: 100HZ – 20KHZ
- Sensitivity 83dB
- Mounting Diameter 3.7” (95MM)
- Mounting Depth 1.7” (44MM)
- Impedance : 4 OHMS
- Spade Terminal allows easy connection of speaker Cable.
- PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
- Torsion basket featuring snap on mounting tabs for greater installation flexibility.
- IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
|
Reviews
There are no reviews yet.