The all new SLICKC10A-V0 is our largest diameter shallow subwoofer ever, loaded with a 10” subwoofer and an installation depth of just 75mm.
This incredible and compact enclosure can be used when space is at a premium but bass is a requirement.
We designed and engineered this product to produce strong accurate bass but keeping in mind a space saving mentality.
The depth of the bass comes from a cast Aluminium enclosure to ensure no resonance and waste of energy alongside a woofer designed specifically to work in this enclosure, dynamic bass from little space.
Specifications
Model – SLICKC10A-V0
Driver – SLICK10S
Type – Active bass enclosure
Peak/RMS Power – 540W/180W
Impedance – 4Ω
Dimensions (H x W x D) – 2.9” x 10.2” x 13.6” (73mm x 260mm x 345mm)
Configuration – 2nd order acoustic suspension
Enclosure Type – Slim Fit Bass Enclosure
Cast Aluminium chassis provides maximum durability and keeps enclosure weight to a minimum.
Auto sense circuit allows the amplifier to turn on and off when using high level input without the need for a remote turn on wire.
0° / 180° Phase shift control.
Remote bass control allows the amplifier level to be adjusted from the front of the vehicle.
Low and high level input allows easy connection to both factory systems or aftermarket headunits.
Reviews
There are no reviews yet.
Be the first to review “SLICKC10A-V0 – Active Underseat Subwoofer” Cancel reply
Boss Audio System Phantom - 12" DUAL Voice Coil (4 Ohm) 2600W Subwoofer. (Sold Single) P129DC
Model: BDPRO4T-V0
Pro Audio compression horn driver
107dB Sensitivity
150 Watts RMS
300 Watts Max
1.5kHz – 20kHz Response
Onyx 5.25" 4-Way 300W Full Range Speakers. (Sold in Pairs)
Onyx 4" 4-Way 250W Full Range Speakers. (Sold in Pairs)
Content
SLICKC10A-V0
The all new SLICKC10A-V0 is our largest diameter shallow subwoofer ever, loaded with a 10” subwoofer and an installation depth of just 75mm.
This incredible and compact enclosure can be used when space is at a premium but bass is a requirement.
We designed and engineered this product to produce strong accurate bass but keeping in mind a space saving mentality.
The depth of the bass comes from a cast Aluminium enclosure to ensure no resonance and waste of energy alongside a woofer designed specifically to work in this enclosure, dynamic bass from little space.
Specifications
Model – SLICKC10A-V0
Driver – SLICK10S
Type – Active bass enclosure
Peak/RMS Power – 540W/180W
Impedance – 4Ω
Dimensions (H x W x D) – 2.9” x 10.2” x 13.6” (73mm x 260mm x 345mm)
Configuration – 2nd order acoustic suspension
Enclosure Type – Slim Fit Bass Enclosure
Cast Aluminium chassis provides maximum durability and keeps enclosure weight to a minimum.
Auto sense circuit allows the amplifier to turn on and off when using high level input without the need for a remote turn on wire.
0° / 180° Phase shift control.
Remote bass control allows the amplifier level to be adjusted from the front of the vehicle.
Low and high level input allows easy connection to both factory systems or aftermarket headunits.
One 10" Woofer with DUAL 4 ohm Voice Coil
2100 Watts MAX 1050 Watts RMS Power Handling
88dB Sensitivity, 34 Hz Resonant Frequency
Poly Injection Cone and Rubber Surround
Works in .65 CuFt Sealed or 1 CuFt Ported enclosure
One 12" Woofer with DUAL 4 ohm Voice Coil
2600 Watts MAX 1300 Watts RMS Power Handling
88dB Sensitivity, 28 Hz Resonant Frequency
Polypropylene & Paper Cone and Rubber Surround
Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
Full Range 5.25" 4-Way Speaker Pair
300 Watts MAX 150 Watts RMS Power Handling per Pair
95 Hz to 20 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
2 Tweeters and .98 inch Mylar Cone Midrange Per Speaker
Sold in Pairs
Full Range 4" 4-Way Speaker Pair
250 Watts MAX 125 Watts RMS Power Handling per Pair
120 Hz to 20 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
2 Tweeters and 1.18 inch Mylar Cone Midrange Per Speaker
Reviews
There are no reviews yet.