HomeCar AudioSLICKC10A-V0 – Active Underseat Subwoofer
View cart “PULSECBR12A-V0: Pulse 12 inch Turbo Ported Active Bass Enclosure” has been added to your cart.
View cart “BOSS Audio Systems CH6930 Car Speakers – 400 Watts Of Power Per Pair, 200 Watts Each, 6 x 9 Inch, Full Range, 3 Way, Sold in Pairs” has been added to your cart.
The all new SLICKC10A-V0 is our largest diameter shallow subwoofer ever, loaded with a 10” subwoofer and an installation depth of just 75mm.
This incredible and compact enclosure can be used when space is at a premium but bass is a requirement.
We designed and engineered this product to produce strong accurate bass but keeping in mind a space saving mentality.
The depth of the bass comes from a cast Aluminium enclosure to ensure no resonance and waste of energy alongside a woofer designed specifically to work in this enclosure, dynamic bass from little space.
Specifications
Model – SLICKC10A-V0
Driver – SLICK10S
Type – Active bass enclosure
Peak/RMS Power – 540W/180W
Impedance – 4Ω
Dimensions (H x W x D) – 2.9” x 10.2” x 13.6” (73mm x 260mm x 345mm)
Configuration – 2nd order acoustic suspension
Enclosure Type – Slim Fit Bass Enclosure
Cast Aluminium chassis provides maximum durability and keeps enclosure weight to a minimum.
Auto sense circuit allows the amplifier to turn on and off when using high level input without the need for a remote turn on wire.
0° / 180° Phase shift control.
Remote bass control allows the amplifier level to be adjusted from the front of the vehicle.
Low and high level input allows easy connection to both factory systems or aftermarket headunits.
Reviews
There are no reviews yet.
Be the first to review “SLICKC10A-V0 – Active Underseat Subwoofer” Cancel reply
Single-DIN, MECH-LESS Multimedia Player (no CD/DVD) Detach Panel Bluetooth
Onyx 5.25" 4-Way 300W Full Range Speakers. (Sold in Pairs)
BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space
Model: BDPRO4T-V0
Pro Audio compression horn driver
107dB Sensitivity
150 Watts RMS
300 Watts Max
1.5kHz – 20kHz Response
Chaos Exxtreme 6" x 9" 2-Way 350W Full Range Speakers. (Sold in Pairs)
Content
SLICKC10A-V0
The all new SLICKC10A-V0 is our largest diameter shallow subwoofer ever, loaded with a 10” subwoofer and an installation depth of just 75mm.
This incredible and compact enclosure can be used when space is at a premium but bass is a requirement.
We designed and engineered this product to produce strong accurate bass but keeping in mind a space saving mentality.
The depth of the bass comes from a cast Aluminium enclosure to ensure no resonance and waste of energy alongside a woofer designed specifically to work in this enclosure, dynamic bass from little space.
Specifications
Model – SLICKC10A-V0
Driver – SLICK10S
Type – Active bass enclosure
Peak/RMS Power – 540W/180W
Impedance – 4Ω
Dimensions (H x W x D) – 2.9” x 10.2” x 13.6” (73mm x 260mm x 345mm)
Configuration – 2nd order acoustic suspension
Enclosure Type – Slim Fit Bass Enclosure
Cast Aluminium chassis provides maximum durability and keeps enclosure weight to a minimum.
Auto sense circuit allows the amplifier to turn on and off when using high level input without the need for a remote turn on wire.
0° / 180° Phase shift control.
Remote bass control allows the amplifier level to be adjusted from the front of the vehicle.
Low and high level input allows easy connection to both factory systems or aftermarket headunits.
50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
No CD or DVD Player, Plays Bluetooth/USB, MP3, WMA, FM/AM, Digital Media from Smart Phones
Compatible with Audio out from Smart Phones and MP3 Players
USB, Aux, Input
Front & Rear Pre Amp Outputs
Detachable Front Panel, Wireless Remote, USB Charging
Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly
Full Range 5.25" 4-Way Speaker Pair
300 Watts MAX 150 Watts RMS Power Handling per Pair
95 Hz to 20 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
2 Tweeters and .98 inch Mylar Cone Midrange Per Speaker
Sold in Pairs
BOSS Audio Systems BAB8 Amplified Car Subwoofer
Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Break Your Subwoofer In
Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.
8-inch 800-Watt subwoofer
Class A/B built-in amplifier
MOSFET power supply
RCA & speaker level input
Phase control
Bass boost
Low pass filter
Remote subwoofer control
Amplified Space Saver
A built-in amplifier powers the 8-inch subwoofer. No need to have a subwoofer housed in a box AND a separate amplifier. If you have a small cabin to work with, the BAB8 will provide the rich bass that every sound system cannot do without.
Remote Subwoofer Control
A wired remote subwoofer control at your fingertips gives you control, so when the need hits… so does your BASS
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
Full Range 6" x 9" 2-Way Speaker Pair
350 Watts MAX 175 Watts RMS Power Handling per Pair
50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
Reviews
There are no reviews yet.