| Description |
- SLICKPRO37T-V0: PRO audio bullet tweeter
- Titanium diaphragm
- Cast aluminium flange
- Spade terminal for easy connection
- 25mm voice coil
| Onyx 5.25" 4-Way 300W Full Range Speakers. (Sold in Pairs) | Phantom - 10" DUAL Voice Coil (4 Ohm) 2100W Subwoofer. (Sold Single) |
- PULSE4-V0: Pulse 4 Inch Coaxial Speaker
- Easy upgrade
- Complete with grills
| The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE. | The new range of Vibe Slick speakers are the most efficient Vibe speaker to date. |
| Content | SLICKPRO37T-V0: VIBE Slick 3.7 INCH Pro Bullet Tweeter
SLICKPRO37T-V0: For over 10 years we have produced high end Pro audio in our Blackdeath range which has always been the loudest and best looking around! So it was about time we added Pro audio across the rest if the VIBE family.
The latest in SLICK Pro products have been designed around efficiency in order to get the best sounding and best priced Pro speakers possible, for example with the 6 inch Midrange having a sensitivity of 98dB!! this allows the speaker to play at huge volumes even on lower power. The range includes 6 and 8 inch midranges and a 3.7 inch Bullet tweeter, all with a unique to car audio rubberised gasket and well known SLICK design concept.
Specifications
- Model – SLICKPRO37T-V0
- Type – Pro audio tweeter
- Configuration – 1-way
- Speaker Size – 3.7” (98mm)
- Peak/RMS Power – 225W / 75W
- Sensitivity – 102dB
- Frequency Response – 2kHz – 20kHz
- Impedance – 4Ω
- Mounting Depth – 1.5” (37mm)
- Mounting Diameter – 2.8” (72mm)
- Grill Included – No
- Recommended Amp – POWERBOX250.2-V0
|
- Full Range 5.25" 4-Way Speaker Pair
- 300 Watts MAX 150 Watts RMS Power Handling per Pair
- 95 Hz to 20 kHz Frequency Response and 90dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 2 Tweeters and .98 inch Mylar Cone Midrange Per Speaker
- Sold in Pairs
|
- One 10" Woofer with DUAL 4 ohm Voice Coil
- 2100 Watts MAX 1050 Watts RMS Power Handling
- 88dB Sensitivity, 34 Hz Resonant Frequency
- Poly Injection Cone and Rubber Surround
- Works in .65 CuFt Sealed or 1 CuFt Ported enclosure
| Entry level 4 inch Coaxial speaker with IMPP Cone
The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
- 4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
- Peak Power output – 40 Watts
- RMS Frequency Response: 100HZ – 20KHZ
- Sensitivity 83dB
- Mounting Diameter 3.7” (95MM)
- Mounting Depth 1.7” (44MM)
- Impedance : 4 OHMS
- Spade Terminal allows easy connection of speaker Cable.
- PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
- Torsion basket featuring snap on mounting tabs for greater installation flexibility.
- IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
| PULSE12-V0 - 12 Inch Subwoofer
Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.
High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.
Specification
- - 350 Watts RMS
- - 1050 Watts Peak
- - 2100 Watts SPL (BURP)
- - Single 4Ω
- - Pressed paper Cone
- - PP Dome Dustcap
- - 1.5″ OFC Voice Coil
- - Poly Cotton Spider
- - Bumped Backplate
- - Butyl Foam Surround
| British Engineered 1 Inch Component Tweeter
The secret weapon is the incredible tweeter. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.
Specification
- - 2″ Tweeter, 150w Peak
- - 50w RMS, 1 way
- - impedance 4 ohm
- - Sensitivity: 94dB
- - Frequency response: 1.5kHz – 25kHz
- - Mounting depth: 0.5″ (12mm)
- - mounting diameter: 1.5″ (39mm)
- - Grill included
|
Reviews
There are no reviews yet.