SLICKPRO37T-V0: VIBE Slick 3.7 INCH Pro Bullet Tweeter
SLICKPRO37T-V0: For over 10 years we have produced high end Pro audio in our Blackdeath range which has always been the loudest and best looking around! So it was about time we added Pro audio across the rest if the VIBE family.
The latest in SLICK Pro products have been designed around efficiency in order to get the best sounding and best priced Pro speakers possible, for example with the 6 inch Midrange having a sensitivity of 98dB!! this allows the speaker to play at huge volumes even on lower power. The range includes 6 and 8 inch midranges and a 3.7 inch Bullet tweeter, all with a unique to car audio rubberised gasket and well known SLICK design concept.
Specifications
Model – SLICKPRO37T-V0
Type – Pro audio tweeter
Configuration – 1-way
Speaker Size – 3.7” (98mm)
Peak/RMS Power – 225W / 75W
Sensitivity – 102dB
Frequency Response – 2kHz – 20kHz
Impedance – 4Ω
Mounting Depth – 1.5” (37mm)
Mounting Diameter – 2.8” (72mm)
Grill Included – No
Recommended Amp – POWERBOX250.2-V0
Reviews
There are no reviews yet.
Be the first to review “SLICKPRO37T-V0 – 3.7 INCH Pro Bullet Tweeter” Cancel reply
SLICKPRO37T-V0: VIBE Slick 3.7 INCH Pro Bullet Tweeter
SLICKPRO37T-V0: For over 10 years we have produced high end Pro audio in our Blackdeath range which has always been the loudest and best looking around! So it was about time we added Pro audio across the rest if the VIBE family.
The latest in SLICK Pro products have been designed around efficiency in order to get the best sounding and best priced Pro speakers possible, for example with the 6 inch Midrange having a sensitivity of 98dB!! this allows the speaker to play at huge volumes even on lower power. The range includes 6 and 8 inch midranges and a 3.7 inch Bullet tweeter, all with a unique to car audio rubberised gasket and well known SLICK design concept.
Specifications
Model – SLICKPRO37T-V0
Type – Pro audio tweeter
Configuration – 1-way
Speaker Size – 3.7” (98mm)
Peak/RMS Power – 225W / 75W
Sensitivity – 102dB
Frequency Response – 2kHz – 20kHz
Impedance – 4Ω
Mounting Depth – 1.5” (37mm)
Mounting Diameter – 2.8” (72mm)
Grill Included – No
Recommended Amp – POWERBOX250.2-V0
Full Range 4" 4-Way Speaker Pair
250 Watts MAX 125 Watts RMS Power Handling per Pair
120 Hz to 20 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
2 Tweeters and 1.18 inch Mylar Cone Midrange Per Speaker
Sold in Pairs
One 12" Woofer with DUAL 4 ohm Voice Coil
2600 Watts MAX 1300 Watts RMS Power Handling
88dB Sensitivity, 28 Hz Resonant Frequency
Polypropylene & Paper Cone and Rubber Surround
Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
PULSE12-V0 - 12 Inch Subwoofer
Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.
High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.
Specification
- 350 Watts RMS
- 1050 Watts Peak
- 2100 Watts SPL (BURP)
- Single 4Ω
- Pressed paper Cone
- PP Dome Dustcap
- 1.5″ OFC Voice Coil
- Poly Cotton Spider
- Bumped Backplate
- Butyl Foam Surround
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
One 10" Woofer with DUAL 4 ohm Voice Coil
2100 Watts MAX 1050 Watts RMS Power Handling
88dB Sensitivity, 34 Hz Resonant Frequency
Poly Injection Cone and Rubber Surround
Works in .65 CuFt Sealed or 1 CuFt Ported enclosure
Reviews
There are no reviews yet.