| Description |
- SLICKV12T-V2: Unique Amplifier Docking System allows easy fitment of the Powerbox 400.1M.
- Ported enclosure delivers higher SPL and boosted bass response.
- Hybrid vent incorporating a slot port and flared turbo ports.
| Phantom 6.5" 2-Way 500W Component Speakers. (Sold in Pairs) | The new range of Vibe Slick speakers are the most efficient Vibe speaker to date. | BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space |
- BlackDeath 10 Inch Pro Audio Midrange high output driver
- Alloy Gasket included
- Sold in Singles
| The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE. |
| Content | SLICKV12T-V2: Hybrid venting combines both slot and tube ports to deliver incredible low frequencies.
Lean and mean vented bass enclosure.
The all new SLICK V12 (SLICKV12T-V2) delivers all the performance you’ve come to expect from the SLICK CBR but in a slim form factor. Ideally suited to vehicles with small or shallow trunk space, the SLICK V12 is over 30% less deep than its bigger CBR sibling yet manages to match the performance. The SLICK V12 series are designed to offer maximum compatibility with a wide range of amplifiers thanks to their dual voice coils.
Specifications
- Model: SLICKV12T-V2
- Driver: 2 x SLICK12
- Type: Passive bass enclosure
- Peak Power: 2400 Watts
- RMS Power: 800 Watts
- Impedance: Dual 2 Ohms
- Dimensions (H x W x D): 13.9″ x 35.4″ x 11.3″ (355mm x 900mm x 288mm)
- Configuration: 4th order bass reflex
- Enclosure Type: Trapezius Bass Enclosure
- Recommended Amplifier: POWERBOX400.1M-V7
|
- Component 6.5" 2-Way Speaker Pair
- 500 Watts MAX 250 Watts RMS Power Handling per Pair
- 65 Hz to 20 kHz Frequency Response and 94dB Sensitivity
- Electroplate Injection Woofer Cone and Rubber Surround
- 1 Tweeter Per Speaker
- Sold in Pairs
| British Engineered 1 Inch Component Tweeter
The secret weapon is the incredible tweeter. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.
Specification
- - 2″ Tweeter, 150w Peak
- - 50w RMS, 1 way
- - impedance 4 ohm
- - Sensitivity: 94dB
- - Frequency response: 1.5kHz – 25kHz
- - Mounting depth: 0.5″ (12mm)
- - mounting diameter: 1.5″ (39mm)
- - Grill included
|
BOSS Audio Systems BAB8 Amplified Car Subwoofer
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
| Competition 10" pro audio speaker
The BDPRO10M-V9: BlackDeath 10 Inch Pro Audio Midrange woofer is designed with excellent mid-bass response in mind. A semi-pressed paper cone has high sensitivity and low moving mass for monstrous output. Dual roll cloth surround offers fast, precise dampening of the cone with great bass response. The BlackHole Dustcap increases the effective cone area for higher SPL creating extreme volume.
BlackDeath range
VIBE Audio’s BlackDeath range is all about taking things to the extreme and creating products so crazy they have no right to exist. BlackDeath isn’t just about pushing the boundaries of audio innovation, it’s about annihilating them.
For many years people have been asking for coaxial and component speakers that are worthy to wear the BlackDeath logo, and after extensive development Vibe are proud to release the BlackDeath Pro Audio range.
Derived from PA speaker design, BlackDeath Pro Audio speakers are capable of immense sound pressure levels, meaning volume like you’ve never heard before. Ideal for competition use or for those who just want to play their music loud and proud.
Specifications
- Model : BlackDeath Pro 8M
- Configuration : 1 Way
- Speaker Size : 10″ (2254mm)
- RMS Power : 275 watts
- Peak Power : 825 watts
- Minimum Input : 125 watts
- Sensitivity : 97 dB
- Freq. Response : 55 Hz – 3.5 kHz
- Impedance : 4 Ohm
- Mounting Depth : 4.2″ (106mm)
- Mounting Diameter: 9.25″ (235mm)
| PULSE12-V0 - 12 Inch Subwoofer
Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.
High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.
Specification
- - 350 Watts RMS
- - 1050 Watts Peak
- - 2100 Watts SPL (BURP)
- - Single 4Ω
- - Pressed paper Cone
- - PP Dome Dustcap
- - 1.5″ OFC Voice Coil
- - Poly Cotton Spider
- - Bumped Backplate
- - Butyl Foam Surround
|
Reviews
There are no reviews yet.