CLRCA5MB-V7: Critical Link 5m Twisted Core RCA

Brand :

AED 71.20
admin
  • CLRCA5MB-V7: 5 m Lead
  • RCA Connectivity
  • Twisted Core
Category:

CLRCA5MB-V7: Critical Link 5m Twisted Core RCA

5 m Lead

RCA Connectivity

Twisted Core

Reviews

There are no reviews yet.

Be the first to review “CLRCA5MB-V7: Critical Link 5m Twisted Core RCA”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsCLRCA5MB-V7: Critical Link 5m Twisted Core RCA removeBOSS Audio Systems BAB8 Amplified Car Subwoofer removeBDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver removeBOSS Audio Systems P65.4C Car Speakers - 350 Watts Of Power Per Pair And 175 Watts Each, 6 x 9 Inch, Full Range, 2 Way, Sold in Pairs, removeBDPRO10M-V9: BlackDeath 10 Inch Pro Audio Midrange removeBOSS Audio Single Din LED Illumination PD12LED remove
ImageCLRCA5MB-V7: Critical Link 5m Twisted Core RCABOSS Audio Systems BAB8 Amplified Car SubwooferBDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn DriverBDPRO10M-V9: BlackDeath 10 Inch Pro Audio Midrange
SKU
Rating
PriceAED 71.20AED 499.00AED 259.41AED 139.00AED 478.95AED 279.00
Stock

Out of stock

AvailabilityOut of stock
Add to cart

Description
  • CLRCA5MB-V7: 5 m Lead
  • RCA Connectivity
  • Twisted Core

BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

  • Model: BDPRO4T-V0
  • Pro Audio compression horn driver
  • 107dB Sensitivity
  • 150 Watts RMS
  • 300 Watts Max
  • 1.5kHz – 20kHz Response
Phantom 6.5" 4-Way 400W Full Range Speakers. (Sold in Pairs)
  • BlackDeath 10 Inch Pro Audio Midrange high output driver
  • Alloy Gasket included
  • Sold in Singles
Phantom - 10" DUAL Voice Coil (4 Ohm) 2100W Subwoofer. (Sold Single)
Content

CLRCA5MB-V7: Critical Link 5m Twisted Core RCA

5 m Lead RCA Connectivity Twisted Core
BOSS Audio Systems BAB8 Amplified Car Subwoofer
  • Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
 
Break Your Subwoofer In Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.  
  • 8-inch 800-Watt subwoofer
  • Class A/B built-in amplifier
  • MOSFET power supply
  • RCA & speaker level input
  • Phase control
  • Bass boost
  • Low pass filter
  • Remote subwoofer control
 

BDPRO4T-V0 - Compression Horn Driver

Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver. The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario. The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market. We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end. Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.  
 

Specifications

  • Type – Compression driver
  • Configuration – 1-way
  • Speaker size – 4.5” (115mm)
  • Frequency Response – 1.5khz – 20Khz
  • Sensitivity – 107dB
  • RMS Power – 150 watts
  • Peak Power – 300 watts
  • Sensitivity – 105dB
  • Impedance – 8Ω
  • Mounting Depth – 2.6” (67mm)
  • Mounting Diameter – 3.5” (90mm)
  • pro audio compression driver
  • composite aluminium diaphragm
  • Torsion basket featuring snap on mounting tabs for greater installation flexibility.
  • cast aluminium housing
  • wide frequency response
  • high power y35 ferrite magnet
  • spring loaded terminals

Frequency Response

  • Full Range 6.5" 4-Way Speaker Pair
  • 400 Watts MAX 200 Watts RMS Power Handling per Pair
  • 65 Hz to 22 kHz Frequency Response and 85dB Sensitivity
  • Polypropylene Woofer Cone and Rubber Surround
  • 2 Tweeters and 1.25 inch Mylar Cone Midrange Per Speaker
  • Sold in Pairs

Competition 10" pro audio speaker

The BDPRO10M-V9: BlackDeath 10 Inch Pro Audio Midrange woofer is designed with excellent mid-bass response in mind. A semi-pressed paper cone has high sensitivity and low moving mass for monstrous output. Dual roll cloth surround offers fast, precise dampening of the cone with great bass response. The BlackHole Dustcap increases the effective cone area for higher SPL creating extreme volume.

BlackDeath range

VIBE Audio’s BlackDeath range is all about taking things to the extreme and creating products so crazy they have no right to exist. BlackDeath isn’t just about pushing the boundaries of audio innovation, it’s about annihilating them. For many years people have been asking for coaxial and component speakers that are worthy to wear the BlackDeath logo, and after extensive development Vibe are proud to release the BlackDeath Pro Audio range. Derived from PA speaker design, BlackDeath Pro Audio speakers are capable of immense sound pressure levels, meaning volume like you’ve never heard before. Ideal for competition use or for those who just want to play their music loud and proud.  
 

Specifications

  • Model : BlackDeath Pro 8M
  • Configuration : 1 Way
  • Speaker Size : 10″ (2254mm)
  • RMS Power : 275 watts
  • Peak Power : 825 watts
  • Minimum Input : 125 watts
  • Sensitivity : 97 dB
  • Freq. Response : 55 Hz – 3.5 kHz
  • Impedance : 4 Ohm
  • Mounting Depth : 4.2″ (106mm)
  • Mounting Diameter: 9.25″ (235mm)
  • One 10" Woofer with DUAL 4 ohm Voice Coil
  • 2100 Watts MAX 1050 Watts RMS Power Handling
  • 88dB Sensitivity, 34 Hz Resonant Frequency
  • Poly Injection Cone and Rubber Surround
  • Works in .65 CuFt Sealed or 1 CuFt Ported enclosure
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information