Featuring a Dual 2ohm VC set up this subwoofer is capable of 300 watts RMS and a 1200 Watt SPL Burp
This subwoofer features our single piece technology cone made from IMPP for increased strength and rigidity and a clean tight bass response, this is tied in with our heritage VIBE styled brushed alloy effect surround.
Featuring light weight soft parts this subwoofer offers great volume at low power due to its efficiency engineered construction
Specifications
300 Watts RMS
900 Watts Peak
1200 Watts SPL (BURP)
Dual 2Ω
Pressed paper Cone
Fibre Blackhole Dustcap
1.5″ OFC Voice Coil
Poly Cotton Spider
Bumped Backplate
Butyl Foam Surround
Reviews
There are no reviews yet.
Be the first to review “PULSE12-V7 – 12 Inch Subwoofer” Cancel reply
Phantom 6.5" 2-Way 500W Component Speakers. (Sold in Pairs)
Onyx 4" 4-Way 250W Full Range Speakers. (Sold in Pairs)
Chaos Exxtreme 6.5" 3-Way 300W Full Range Speakers. (Sold in Pairs)
PULSE4-V0: Pulse 4 Inch Coaxial Speaker
Easy upgrade
Complete with grills
Model: BDPRO4T-V0
Pro Audio compression horn driver
107dB Sensitivity
150 Watts RMS
300 Watts Max
1.5kHz – 20kHz Response
Content
PULSE12-V7 - 12 Inch Subwoofer
VIBE Presents the PULSE 12 inch subwoofer
Featuring a Dual 2ohm VC set up this subwoofer is capable of 300 watts RMS and a 1200 Watt SPL Burp
This subwoofer features our single piece technology cone made from IMPP for increased strength and rigidity and a clean tight bass response, this is tied in with our heritage VIBE styled brushed alloy effect surround.
Featuring light weight soft parts this subwoofer offers great volume at low power due to its efficiency engineered construction
Specifications
300 Watts RMS
900 Watts Peak
1200 Watts SPL (BURP)
Dual 2Ω
Pressed paper Cone
Fibre Blackhole Dustcap
1.5″ OFC Voice Coil
Poly Cotton Spider
Bumped Backplate
Butyl Foam Surround
Component 6.5" 2-Way Speaker Pair
500 Watts MAX 250 Watts RMS Power Handling per Pair
65 Hz to 20 kHz Frequency Response and 94dB Sensitivity
Electroplate Injection Woofer Cone and Rubber Surround
1 Tweeter Per Speaker
Sold in Pairs
Full Range 4" 4-Way Speaker Pair
250 Watts MAX 125 Watts RMS Power Handling per Pair
120 Hz to 20 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
2 Tweeters and 1.18 inch Mylar Cone Midrange Per Speaker
Sold in Pairs
Full Range 6.5" 3-Way Speaker Pair
300 Watts MAX 150 Watts RMS Power Handling per Pair
100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
1 Tweeter and 1 inch Polyimide Dome Midrange Per Speaker
Sold in Pairs
Entry level 4 inch Coaxial speaker with IMPP Cone
The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
Peak Power output – 40 Watts
RMS Frequency Response: 100HZ – 20KHZ
Sensitivity 83dB
Mounting Diameter 3.7” (95MM)
Mounting Depth 1.7” (44MM)
Impedance : 4 OHMS
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
Reviews
There are no reviews yet.