PULSE6-V0: The Pulse coaxial speakers are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
6.5”(165mm) 2-way Coaxial speaker 180 Watt
Peak Power output – 60 Watts RMS
Frequency Response: 65HZ – 20KHZ
Sensitivity 91dB
Mounting Diameter 5.6” (141MM)
Mounting Depth 2.1” (53MM)
Impedance : 4 OHMS
Recommended Amp: POWERBOX80.4-V0
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Steel Mesh Grill – Steel mesh grill provides protection for the woofer cone.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
Reviews
There are no reviews yet.
Be the first to review “PULSE6-V0: Pulse 6.5 Inch Coaxial Speaker” Cancel reply
Chaos Exxtreme 6.5" 3-Way 300W Full Range Speakers. (Sold in Pairs)
The new range of Vibe Slick speakers are the most efficient Vibe speaker to date.
Chaos Exxtreme 6" x 9" 2-Way 350W Full Range Speakers. (Sold in Pairs)
Content
Entry level 6 inch Coaxial speaker with IMPP Cone
PULSE6-V0: The Pulse coaxial speakers are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
6.5”(165mm) 2-way Coaxial speaker 180 Watt
Peak Power output – 60 Watts RMS
Frequency Response: 65HZ – 20KHZ
Sensitivity 91dB
Mounting Diameter 5.6” (141MM)
Mounting Depth 2.1” (53MM)
Impedance : 4 OHMS
Recommended Amp: POWERBOX80.4-V0
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Steel Mesh Grill – Steel mesh grill provides protection for the woofer cone.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
Entry level 4 inch Coaxial speaker with IMPP Cone
The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
Peak Power output – 40 Watts
RMS Frequency Response: 100HZ – 20KHZ
Sensitivity 83dB
Mounting Diameter 3.7” (95MM)
Mounting Depth 1.7” (44MM)
Impedance : 4 OHMS
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
Full Range 6.5" 3-Way Speaker Pair
300 Watts MAX 150 Watts RMS Power Handling per Pair
100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
1 Tweeter and 1 inch Polyimide Dome Midrange Per Speaker
Sold in Pairs
British Engineered 1 Inch Component Tweeter
The secret weapon is the incredible tweeter. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.
Specification
- 2″ Tweeter, 150w Peak
- 50w RMS, 1 way
- impedance 4 ohm
- Sensitivity: 94dB
- Frequency response: 1.5kHz – 25kHz
- Mounting depth: 0.5″ (12mm)
- mounting diameter: 1.5″ (39mm)
- Grill included
Full Range 6" x 9" 2-Way Speaker Pair
350 Watts MAX 175 Watts RMS Power Handling per Pair
50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
Reviews
There are no reviews yet.