| Description | Vibe PULSE 6.5” component speaker: PULSE6C-V4 | Single-DIN, CD/MP3 Player Bluetooth | BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space | The new range of Vibe Slick speakers are the most efficient Vibe speaker to date. |
- PULSE4-V0: Pulse 4 Inch Coaxial Speaker
- Easy upgrade
- Complete with grills
| Chaos Exxtreme 6.5" 3-Way 300W Full Range Speakers. (Sold in Pairs) |
| Content | Product Description
PULSE6C-V4: The Pulse 6.5" component speaker is the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
SILK DOME TWEETER: Silk dome tweeters deliver smooth high frequency handling to give your music definition and clarity
IMPP WOOFER CONE: Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction
SEPARATE CROSSOVER: External passive crossover network separates low and high frequencies and is superior to in-line filters
Specifications
- Type: Component
- Configuration: 2 way
- Size : 6.5" (165 mm)
- RMS Power : 80 Watts
- Peak Power : 240 watts
- Min Input : 40 watts RMS
- Sensitivity : 90 dB
- Freq Response : 65 Hz – 20 KHz
- Impedance: 4 Ohms
- Mounting Depth : 2.1" (53 mm)
- Mounting Diameter : 5.6" (141 mm)
- Recommended amp : PULSES4-V4
|
- 50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
- Plays Bluetooth/CD/USB, MP3, WMA, FM/AM, Digital Media from Smart Phones
- Compatible with Audio out from Smart Phones and MP3 Players
- USB, Aux, Input
- Front & Rear Pre Amp Outputs
- Wireless Remote
- Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly
|
BOSS Audio Systems BAB8 Amplified Car Subwoofer
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
| British Engineered 1 Inch Component Tweeter
The secret weapon is the incredible tweeter. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.
Specification
- - 2″ Tweeter, 150w Peak
- - 50w RMS, 1 way
- - impedance 4 ohm
- - Sensitivity: 94dB
- - Frequency response: 1.5kHz – 25kHz
- - Mounting depth: 0.5″ (12mm)
- - mounting diameter: 1.5″ (39mm)
- - Grill included
| Entry level 4 inch Coaxial speaker with IMPP Cone
The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
- 4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
- Peak Power output – 40 Watts
- RMS Frequency Response: 100HZ – 20KHZ
- Sensitivity 83dB
- Mounting Diameter 3.7” (95MM)
- Mounting Depth 1.7” (44MM)
- Impedance : 4 OHMS
- Spade Terminal allows easy connection of speaker Cable.
- PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
- Torsion basket featuring snap on mounting tabs for greater installation flexibility.
- IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
|
- Full Range 6.5" 3-Way Speaker Pair
- 300 Watts MAX 150 Watts RMS Power Handling per Pair
- 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter and 1 inch Polyimide Dome Midrange Per Speaker
- Sold in Pairs
|
Reviews
There are no reviews yet.