| Description |
- SLICK6SQC-V9: 6.5″ High-efficiency speaker
- Designed to replace factory speaker
- SQ Sound
| BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space |
- PULSE4-V0: Pulse 4 Inch Coaxial Speaker
- Easy upgrade
- Complete with grills
| Phantom - 10" DUAL Voice Coil (4 Ohm) 2100W Subwoofer. (Sold Single) | Chaos Exxtreme 6.5" 3-Way 300W Full Range Speakers. (Sold in Pairs) | Single-DIN, CD/MP3 Player Bluetooth |
| Content | SLICK6SQC-V9: British Engineered 2 way component speaker
“Innovation in efficiency – effortless sound quality”
VIBE’s mission with its Slick range of speakers (SLICK6SQC-V9) was to produce a truly Efficient speaker that delivered market leading performance.
The VIBE R&D team developed the Slick SQ speaker from the ground up using their skill and expertise in speaker design to produce the most efficient VIBE speaker to date!
The woofer design utilises a super lightweight paper composite cone and foam surround, a single layer spider and a 2 inch perfectly balanced and sized voice coil.
The slick woofer can, therefore, deliver effortless bass and peerless vocal response at any power input.
The SQ version of the renown Slick series speaker includes a full Passive crossover network has tweeter attenuation and better quality components to enrich the already fantastic sound!
The technology incorporated into the component tweeter is that of a product many times its cost.
Its tiny 25mm size makes it one of the smallest on the market, coupled with British design, engineering and built from European components.
Aesthetically beautiful, precise in performance, with market leading efficiency.
Specifications
- 6.5″ 2 way component speaker
- 270w Peak
- 90w RMS
- Sensitivity: 94dB
- Frequency response: 54Hz – 25 kHz
- Impedance 4 ohm
- Mounting depth: 2.4″ (61mm)
- Mounting diameter: 5.6″ (142mm)
- Ultra compact 25mm silk dome tweeter delivers an exceptional level of sound quality matched with high efficiency.
- New heavier cone to allow more accurate bass and vocal response and better form to deal with the increased speaker BL
- Larger motor than the standardised Slick6 which delivers a much greater motorforce allowing for a 25% power increase.
- 94db sensitivity rating, giving class leading speaker efficiency.
- Full active crossover with high quality components
- Modified VC for harmonised performance along side new motor and cone
- Stylish design allowing seamless system integration.
|
BOSS Audio Systems BAB8 Amplified Car Subwoofer
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
| Entry level 4 inch Coaxial speaker with IMPP Cone
The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
- 4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
- Peak Power output – 40 Watts
- RMS Frequency Response: 100HZ – 20KHZ
- Sensitivity 83dB
- Mounting Diameter 3.7” (95MM)
- Mounting Depth 1.7” (44MM)
- Impedance : 4 OHMS
- Spade Terminal allows easy connection of speaker Cable.
- PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
- Torsion basket featuring snap on mounting tabs for greater installation flexibility.
- IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
|
- One 10" Woofer with DUAL 4 ohm Voice Coil
- 2100 Watts MAX 1050 Watts RMS Power Handling
- 88dB Sensitivity, 34 Hz Resonant Frequency
- Poly Injection Cone and Rubber Surround
- Works in .65 CuFt Sealed or 1 CuFt Ported enclosure
|
- Full Range 6.5" 3-Way Speaker Pair
- 300 Watts MAX 150 Watts RMS Power Handling per Pair
- 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter and 1 inch Polyimide Dome Midrange Per Speaker
- Sold in Pairs
|
- 50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
- Plays Bluetooth/CD/USB, MP3, WMA, FM/AM, Digital Media from Smart Phones
- Compatible with Audio out from Smart Phones and MP3 Players
- USB, Aux, Input
- Front & Rear Pre Amp Outputs
- Wireless Remote
- Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly
|
Reviews
There are no reviews yet.