Description |
- 6 Inch Pro Audio Midrange: Non pressed paper cone
- Dual roll foam surround
- 25mm voice coil
- Polycotton spiders
|
- PULSE4-V0: Pulse 4 Inch Coaxial Speaker
- Easy upgrade
- Complete with grills
| Phantom - 10" DUAL Voice Coil (4 Ohm) 2100W Subwoofer. (Sold Single) | Onyx 4" 4-Way 250W Full Range Speakers. (Sold in Pairs) | Single-DIN, CD/MP3 Player Bluetooth | BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space |
Content | VIBE 6 Inch Pro Audio Midrange
SLICKPRO6M-V0 – 6 Inch Pro Audio Midrange: For over 10 years we have produced high end Pro audio in our Blackdeath range which has always been the loudest and best looking around! So it was about time we added Pro audio across the rest if the VIBE family.
The latest in SLICK Pro products have been designed around efficiency in order to get the best sounding and best priced Pro speakers possible, for example with the 6 inch Midrange having a sensitivity of 98dB!! this allows the speaker to play at huge volumes even on lower power. The range includes 6 and 8 inch midranges and a 3.7 inch Bullet tweeter, all with a unique to car audio rubberised gasket and well known SLICK design concept.
Specifications
- Model – SLICKPRO6M-V0
- Type – Pro audio midrange.
- Configuration – 1-way
- Speaker Size – 6.6” (167mm)
- Peak/RMS Power – 275W / 125W
- Sensitivity – 98dB
- Frequency Response – 100Hz – 9kHz
- Impedance – 4Ω
- Mounting Depth – 1.9” (73mm)
- Mounting Diameter – 5.7” (144mm)
- Grill Included – No
- Recommended Amp – POWERBOX250.2-V0
| Entry level 4 inch Coaxial speaker with IMPP Cone
The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
- 4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
- Peak Power output – 40 Watts
- RMS Frequency Response: 100HZ – 20KHZ
- Sensitivity 83dB
- Mounting Diameter 3.7” (95MM)
- Mounting Depth 1.7” (44MM)
- Impedance : 4 OHMS
- Spade Terminal allows easy connection of speaker Cable.
- PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
- Torsion basket featuring snap on mounting tabs for greater installation flexibility.
- IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
|
- One 10" Woofer with DUAL 4 ohm Voice Coil
- 2100 Watts MAX 1050 Watts RMS Power Handling
- 88dB Sensitivity, 34 Hz Resonant Frequency
- Poly Injection Cone and Rubber Surround
- Works in .65 CuFt Sealed or 1 CuFt Ported enclosure
|
- Full Range 4" 4-Way Speaker Pair
- 250 Watts MAX 125 Watts RMS Power Handling per Pair
- 120 Hz to 20 kHz Frequency Response and 90dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 2 Tweeters and 1.18 inch Mylar Cone Midrange Per Speaker
- Sold in Pairs
|
- 50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
- Plays Bluetooth/CD, FM/AM, Digital Media from Smart Phones
- Compatible with Audio out from Smart Phones and MP3 Players
- Aux, Input
- Front & Rear Pre Amp Outputs
- Wireless Remote
- Bluetooth Hands Free, Make and receive cal
|
BOSS Audio Systems BAB8 Amplified Car Subwoofer
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
|
Reviews
There are no reviews yet.