SLICKV12T-V2: Hybrid venting combines both slot and tube ports to deliver incredible low frequencies.
Lean and mean vented bass enclosure.
The all new SLICK V12 (SLICKV12T-V2) delivers all the performance you’ve come to expect from the SLICK CBR but in a slim form factor. Ideally suited to vehicles with small or shallow trunk space, the SLICK V12 is over 30% less deep than its bigger CBR sibling yet manages to match the performance. The SLICK V12 series are designed to offer maximum compatibility with a wide range of amplifiers thanks to their dual voice coils.
Specifications
Model: SLICKV12T-V2
Driver: 2 x SLICK12
Type: Passive bass enclosure
Peak Power: 2400 Watts
RMS Power: 800 Watts
Impedance: Dual 2 Ohms
Dimensions (H x W x D): 13.9″ x 35.4″ x 11.3″ (355mm x 900mm x 288mm)
Configuration: 4th order bass reflex
Enclosure Type: Trapezius Bass Enclosure
Recommended Amplifier: POWERBOX400.1M-V7
Reviews
There are no reviews yet.
Be the first to review “SLICKV12T-V2 – VIBE SLICK 12 Inch Twin Passive Bass Subwoofer Enclosure” Cancel reply
SLICKV12T-V2: Unique Amplifier Docking System allows easy fitment of the Powerbox 400.1M.
Ported enclosure delivers higher SPL and boosted bass response.
Hybrid vent incorporating a slot port and flared turbo ports.
Phantom 6.5" 2-Way 500W Component Speakers. (Sold in Pairs)
Phantom 6.5" 4-Way 400W Full Range Speakers. (Sold in Pairs)
Single-DIN, MECH-LESS Multimedia Player (no CD/DVD) Detach Panel Bluetooth
Model: BDPRO4T-V0
Pro Audio compression horn driver
107dB Sensitivity
150 Watts RMS
300 Watts Max
1.5kHz – 20kHz Response
Onyx 4" 4-Way 250W Full Range Speakers. (Sold in Pairs)
Content
SLICKV12T-V2: Hybrid venting combines both slot and tube ports to deliver incredible low frequencies.
Lean and mean vented bass enclosure.
The all new SLICK V12 (SLICKV12T-V2) delivers all the performance you’ve come to expect from the SLICK CBR but in a slim form factor. Ideally suited to vehicles with small or shallow trunk space, the SLICK V12 is over 30% less deep than its bigger CBR sibling yet manages to match the performance. The SLICK V12 series are designed to offer maximum compatibility with a wide range of amplifiers thanks to their dual voice coils.
Specifications
Model: SLICKV12T-V2
Driver: 2 x SLICK12
Type: Passive bass enclosure
Peak Power: 2400 Watts
RMS Power: 800 Watts
Impedance: Dual 2 Ohms
Dimensions (H x W x D): 13.9″ x 35.4″ x 11.3″ (355mm x 900mm x 288mm)
Configuration: 4th order bass reflex
Enclosure Type: Trapezius Bass Enclosure
Recommended Amplifier: POWERBOX400.1M-V7
Component 6.5" 2-Way Speaker Pair
500 Watts MAX 250 Watts RMS Power Handling per Pair
65 Hz to 20 kHz Frequency Response and 94dB Sensitivity
Electroplate Injection Woofer Cone and Rubber Surround
1 Tweeter Per Speaker
Sold in Pairs
Full Range 6.5" 4-Way Speaker Pair
400 Watts MAX 200 Watts RMS Power Handling per Pair
65 Hz to 22 kHz Frequency Response and 85dB Sensitivity
Polypropylene Woofer Cone and Rubber Surround
2 Tweeters and 1.25 inch Mylar Cone Midrange Per Speaker
Sold in Pairs
50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
No CD or DVD Player, Plays Bluetooth/USB, MP3, WMA, FM/AM, Digital Media from Smart Phones
Compatible with Audio out from Smart Phones and MP3 Players
USB, Aux, Input
Front & Rear Pre Amp Outputs
Detachable Front Panel, Wireless Remote, USB Charging
Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
Full Range 4" 4-Way Speaker Pair
250 Watts MAX 125 Watts RMS Power Handling per Pair
120 Hz to 20 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
2 Tweeters and 1.18 inch Mylar Cone Midrange Per Speaker
Reviews
There are no reviews yet.