Compact 12 inch Bass Enclosure with Active Amplifier
BLACKAIRC12ACTIVE-V6: Black Compact 12 Inch Passive Radiator Active Subwoofer Enclosure Perfectly designed for today’s demand for high performance yet small footprint bass enclosures. Passive radiators enable the great bass response in a small enclosure with no port, with the advantages of no port non linearities and no high frequencies reflected out of a vent. Fully compatible with our plug and play micro amplifiers.
Specifications
12″ Passive Subwoofer Enclosure
1500w Peak, 500w RMS
Impedance: dual 2 ohm
13.8″ (351mm) x 15.8″ (402mm) x 11.4″ (290mm)
2nd order passive radiator enclosure
170w @ 4 ohm
1.5″ x 6.2″ x 3.2″ (37mm x 157mm x 82mm)
250w RMS @ 2 ohm
400w RMS @ 1 ohm
Frequency response: 10Hz – 500Hz
Crossover type: LP/subsonic
Crossover range: 30Hz – 150Hz Class D micro amplifier
Enclosure Design
Reviews
There are no reviews yet.
Be the first to review “BLACKAIRC12ACTIVE-V6: Black Compact 12 Inch Passive Radiator Active Subwoofer Enclosure” Cancel reply
Boss Audio System Phantom - 12" DUAL Voice Coil (4 Ohm) 2600W Subwoofer. (Sold Single) P129DC
The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
Model: BDPRO4T-V0
Pro Audio compression horn driver
107dB Sensitivity
150 Watts RMS
300 Watts Max
1.5kHz – 20kHz Response
Chaos Exxtreme 6" x 9" 3-Way 400W Full Range Speakers. (Sold in Pairs)
Chaos Exxtreme 6.5" 3-Way 300W Full Range Speakers. (Sold in Pairs)
Content
Compact 12 inch Bass Enclosure with Active Amplifier
BLACKAIRC12ACTIVE-V6: Black Compact 12 Inch Passive Radiator Active Subwoofer Enclosure Perfectly designed for today’s demand for high performance yet small footprint bass enclosures. Passive radiators enable the great bass response in a small enclosure with no port, with the advantages of no port non linearities and no high frequencies reflected out of a vent. Fully compatible with our plug and play micro amplifiers.
Specifications
12″ Passive Subwoofer Enclosure
1500w Peak, 500w RMS
Impedance: dual 2 ohm
13.8″ (351mm) x 15.8″ (402mm) x 11.4″ (290mm)
2nd order passive radiator enclosure
170w @ 4 ohm
1.5″ x 6.2″ x 3.2″ (37mm x 157mm x 82mm)
250w RMS @ 2 ohm
400w RMS @ 1 ohm
Frequency response: 10Hz – 500Hz
Crossover type: LP/subsonic
Crossover range: 30Hz – 150Hz Class D micro amplifier
Enclosure Design
One 12" Woofer with DUAL 4 ohm Voice Coil
2600 Watts MAX 1300 Watts RMS Power Handling
88dB Sensitivity, 28 Hz Resonant Frequency
Polypropylene & Paper Cone and Rubber Surround
Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
PULSE12-V0 - 12 Inch Subwoofer
Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.
High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.
Specification
- 350 Watts RMS
- 1050 Watts Peak
- 2100 Watts SPL (BURP)
- Single 4Ω
- Pressed paper Cone
- PP Dome Dustcap
- 1.5″ OFC Voice Coil
- Poly Cotton Spider
- Bumped Backplate
- Butyl Foam Surround
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
Full Range 6" x 9" 3-Way Speaker Pair
400 Watts MAX 200 Watts RMS Power Handling per Pair
50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
1 Tweeter and 2 inch Polyimide Cone Midrange Per Speaker
Sold in Pairs
Full Range 6.5" 3-Way Speaker Pair
300 Watts MAX 150 Watts RMS Power Handling per Pair
100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
1 Tweeter and 1 inch Polyimide Dome Midrange Per Speaker
Reviews
There are no reviews yet.