BOSS Audio Systems BAB8 Amplified Car Subwoofer

AED 499.00
admin

BOSS Audio Systems BAB8 Amplified Car Subwoofer – 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

Category:

BOSS Audio Systems BAB8 Amplified Car Subwoofer

  • Space Saver – The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier – A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated – This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter – A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input – Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input – Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost – Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

 

Break Your Subwoofer In

Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

 

  • 8-inch 800-Watt subwoofer
  • Class A/B built-in amplifier
  • MOSFET power supply
  • RCA & speaker level input
  • Phase control
  • Bass boost
  • Low pass filter
  • Remote subwoofer control

 

Reviews

There are no reviews yet.

Be the first to review “BOSS Audio Systems BAB8 Amplified Car Subwoofer”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsBOSS Audio Systems BAB8 Amplified Car Subwoofer removePULSE12-V0 – 12 Inch Subwoofer removeBOSS Audio Single Din LED Illumination PD12LED removeBOSS Audio Systems CH6930 Car Speakers - 400 Watts Of Power Per Pair, 200 Watts Each, 6 x 9 Inch, Full Range, 3 Way, Sold in Pairs removeSLICK1-V7: Slick 1 Inch Component Tweeter removeBOSS Audio Systems BCPA10 remove
ImageBOSS Audio Systems BAB8 Amplified Car Subwoofer
SKU
Rating
PriceAED 499.00AED 477.00AED 550.00AED 140.00AED 122.00AED 1,150.00
Stock

Out of stock

Out of stock

AvailabilityOut of stockOut of stock
Add to cart

Description

BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.Phantom - 12" DUAL Voice Coil (4 Ohm) 1600W Subwoofer. (Sold Single)Chaos Exxtreme 6" x 9" 3-Way 400W Full Range Speakers. (Sold in Pairs)The new range of Vibe Slick speakers are the most efficient Vibe speaker to date.BOSS Audio Systems BCPA10 - Single Din Chassis with Detachable 10.1 Inch Capacitive Touchscreen, Apple CarPlay, Android Auto, Bluetooth, No DVD, RGB Illumination, High Resolution FLAC Audio
Content BOSS Audio Systems BAB8 Amplified Car Subwoofer
  • Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
 
Break Your Subwoofer In Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.  
  • 8-inch 800-Watt subwoofer
  • Class A/B built-in amplifier
  • MOSFET power supply
  • RCA & speaker level input
  • Phase control
  • Bass boost
  • Low pass filter
  • Remote subwoofer control
 

PULSE12-V0 - 12 Inch Subwoofer

Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.

The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.

High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.

 

Specification

  • - 350 Watts RMS
  • - 1050 Watts Peak
  • - 2100 Watts SPL (BURP)
  • - Single 4Ω
  • - Pressed paper Cone
  • - PP Dome Dustcap
  • - 1.5″ OFC Voice Coil
  • - Poly Cotton Spider
  • - Bumped Backplate
  • - Butyl Foam Surround
  • One 12" Woofer with DUAL 4 ohm Voice Coil
  • 1600 Watts MAX 800 Watts RMS Power Handling
  • 85dB Sensitivity, 26 Hz Resonant Frequency
  • Polypropylene & Paper Cone and Rubber Surround
  • Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
  • Blue LED Illumination
  • Full Range 6" x 9" 3-Way Speaker Pair
  • 400 Watts MAX 200 Watts RMS Power Handling per Pair
  • 50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 1 Tweeter and 2 inch Polyimide Cone Midrange Per Speaker
  • Sold in Pairs

British Engineered 1 Inch Component Tweeter

The secret weapon is the incredible tweeter. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.

Specification

  • - 2″ Tweeter, 150w Peak
  • - 50w RMS, 1 way
  • - impedance 4 ohm
  • - Sensitivity: 94dB
  • - Frequency response: 1.5kHz – 25kHz
  • - Mounting depth: 0.5″ (12mm)
  • - mounting diameter: 1.5″ (39mm)
  • - Grill included
  • Apple CarPlay - Access icons on your iPhone by activating Siri voice controls or touchscreen. Available features include Phone, Music, Maps, Text messages, Radio, Podcasts, Audiobooks. Make your drive more interesting
  • Messages - With Siri on your side, you can ask her to read you your messages, reply as well as send them. Siri lets you concentrate on what matters most. Driving
  • Maps - Need gas? Hungry? Search along your route by asking Siri, and CarPlay will direct you every step of the way and tell you the speed limit too. Third-party navigation apps like Google Maps, Waze and Baidu are also available
  • Bluetooth - Make calls hands-free with the help of Siri. Play music apps like Spotify or Pandora as well as iTunes and Apple Music Subscription. Siri will be your DJ
  • Android Auto - Just say “Ok Google” to talk to the Google Assistant for help. Get real-time alerts on Google Maps and Waze. Make calls, check your messages, reply back, use music apps, all while keeping your hands on the steering wheel
  • APPS - Rearrange how you want your apps to appear in CarPlay through the settings on your iPhone. Supported apps include WhatsApp, Radio Disney, Amazon, iHeartRadio, Podcasts, Google Play Music, CBS Radio and more
  • Inputs – USB, USB charging, AV, front & rear camera, steering wheel interface (Sold separately. We recommend the Metra ASWC-1)
  • Outputs - Front, rear & subwoofer pre-amp for speakers (front left / front right and rear left / rear right) and subwoofer
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information