| Description | BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space |
- PULSE4-V0: Pulse 4 Inch Coaxial Speaker
- Easy upgrade
- Complete with grills
| Phantom 6.5" 4-Way 400W Full Range Speakers. (Sold in Pairs) | Chaos Exxtreme 5.25" 2-Way 200W Full Range Speakers. (Sold in Pairs) | Phantom - 12" DUAL Voice Coil (4 Ohm) 1600W Subwoofer. (Sold Single) | Chaos Exxtreme 6.5" 3-Way 300W Full Range Speakers. (Sold in Pairs) |
| Content |
BOSS Audio Systems BAB8 Amplified Car Subwoofer
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
| Entry level 4 inch Coaxial speaker with IMPP Cone
The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
- 4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
- Peak Power output – 40 Watts
- RMS Frequency Response: 100HZ – 20KHZ
- Sensitivity 83dB
- Mounting Diameter 3.7” (95MM)
- Mounting Depth 1.7” (44MM)
- Impedance : 4 OHMS
- Spade Terminal allows easy connection of speaker Cable.
- PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
- Torsion basket featuring snap on mounting tabs for greater installation flexibility.
- IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
|
- Full Range 6.5" 4-Way Speaker Pair
- 400 Watts MAX 200 Watts RMS Power Handling per Pair
- 65 Hz to 22 kHz Frequency Response and 85dB Sensitivity
- Polypropylene Woofer Cone and Rubber Surround
- 2 Tweeters and 1.25 inch Mylar Cone Midrange Per Speaker
- Sold in Pairs
|
- Full Range 5.25" 2-Way Speaker Pair
- 200 Watts MAX 100 Watts RMS Power Handling per Pair
- 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter Per Speaker
- Sold in Pairs
|
- One 12" Woofer with DUAL 4 ohm Voice Coil
- 1600 Watts MAX 800 Watts RMS Power Handling
- 85dB Sensitivity, 26 Hz Resonant Frequency
- Polypropylene & Paper Cone and Rubber Surround
- Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
- Blue LED Illumination
|
- Full Range 6.5" 3-Way Speaker Pair
- 300 Watts MAX 150 Watts RMS Power Handling per Pair
- 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter and 1 inch Polyimide Dome Midrange Per Speaker
- Sold in Pairs
|
Reviews
There are no reviews yet.