1000 Watt class D monoblock amplifier with Bass Remote

POWERBOX1000.1-V9: The new Vibe Powerbox amplifier range is designed to be able to offer a Vibe amplifier to power and speaker, subwoofer or enclosure I the Vibe range. Mono, 2, 4 and 5 channel amplifiers give a solution for any system. All the amplifiers feature auto sense technology which allows the amp to turn on and off without the need for a +12v remote trigger when using high level input. Signature Vibe detailing and an attractive satin black finish with gloss black endplates ensure the Powerbox range will Stand out from the crowd!

Specifications

• 350w @ 4 ohm
• Maximum power 2000 watts
• Dimensions (H x W x D) – 2” x 14.1” x 7.6” (50mm x 358mm x 194mm
• RMS @ 2Ω Mono – 700 watts
• RMS @ 1Ω Mono – 1000 watts
• Frequency Response – 10Hz – 350Hz
• Crossover Type – LP / Subsonic
• Crossover Range – 10Hz – 150Hz
• Class D Extruded aluminium heatsink provides superior heat dissipation and thermal performance.
• Bass boost centred at 45Hz variable from 0dB – 6dB High level input with Autosense circuit allows the amplifier to turn on and off.

Connectivity

• Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
• Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
• Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
• Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Amplified Space Saver

A built-in amplifier powers the 8-inch subwoofer. No need to have a subwoofer housed in a box AND a separate amplifier. If you have a small cabin to work with, the BAB8 will provide the rich bass that every sound system cannot do without.

Remote Subwoofer Control

A wired remote subwoofer control at your fingertips gives you control, so when the need hits… so does your BASS

British Engineered 1 Inch Component Tweeter

The secret weapon is the incredible tweeter. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.

Specification

• Full Range 5.25" 2-Way Speaker Pair
• 200 Watts MAX 100 Watts RMS Power Handling per Pair
• 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
• Poly Injection Woofer Cone and Rubber Surround
• 1 Tweeter Per Speaker
• Sold in Pairs

PULSE12-V0 - 12 Inch Subwoofer

Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.

The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.

High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.

Specification

• Full Range 6.5" 3-Way Speaker Pair
• 300 Watts MAX 150 Watts RMS Power Handling per Pair
• 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
• Poly Injection Woofer Cone and Rubber Surround
• 1 Tweeter and 1 inch Polyimide Dome Midrange Per Speaker
• Sold in Pairs