| Description |
- POWERBOX60.4-V9: 4 Channel Stereo Amplifier
- Includes remote control
- Bridgeable Channels at 4 Ohm
| Chaos Exxtreme 6" x 9" 2-Way 350W Full Range Speakers. (Sold in Pairs) | Phantom 6.5" 4-Way 400W Full Range Speakers. (Sold in Pairs) | Phantom - 10" DUAL Voice Coil (4 Ohm) 2100W Subwoofer. (Sold Single) | BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space | Phantom 6.5" 2-Way 500W Component Speakers. (Sold in Pairs) |
| Content | 4 Channel Bridgeable Class AB amplifier
The new Vibe POWERBOX60.4-V9 amplifier range is designed to be able to offer a Vibe amplifier to power and speaker, subwoofer or enclosure I the Vibe range. Mono, 2, 4 and 5 channel amplifiers give a solution for any system. All the amplifiers feature auto sense technology which allows the amp to turn on and off without the need for a +12v remote trigger when using high level input. Signature Vibe detailing and an attractive satin silver finish with gloss black endplates ensure the Powerbox range will Stand out from the crowd!
Specifications
- 4 x 60w @ 4 ohm
- maximum power 640w
- Dimensions (H x W x D) – 2” x 9” x 7.6” (50mm x 229mm x 194mm)
- RMS @ 2Ω Stereo – 4 x 80 watts
- RMS @ 4Ω Mono – 2 x 160 watts
- Frequency Response – 20Hz – 20kHz
- Crossover Type – LP / HP / Flat
- Crossover Range – 50Hz – 4kHz
- Class AB Extruded aluminium heatsink provides superior heat dissipation and thermal performance.
- High level input with Autosense circuit allows the amplifier to turn on and off
|
- Full Range 6" x 9" 2-Way Speaker Pair
- 350 Watts MAX 175 Watts RMS Power Handling per Pair
- 50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter Per Speaker
- Sold in Pairs
|
- Full Range 6.5" 4-Way Speaker Pair
- 400 Watts MAX 200 Watts RMS Power Handling per Pair
- 65 Hz to 22 kHz Frequency Response and 85dB Sensitivity
- Polypropylene Woofer Cone and Rubber Surround
- 2 Tweeters and 1.25 inch Mylar Cone Midrange Per Speaker
- Sold in Pairs
|
- One 10" Woofer with DUAL 4 ohm Voice Coil
- 2100 Watts MAX 1050 Watts RMS Power Handling
- 88dB Sensitivity, 34 Hz Resonant Frequency
- Poly Injection Cone and Rubber Surround
- Works in .65 CuFt Sealed or 1 CuFt Ported enclosure
|
BOSS Audio Systems BAB8 Amplified Car Subwoofer
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
|
- Component 6.5" 2-Way Speaker Pair
- 500 Watts MAX 250 Watts RMS Power Handling per Pair
- 65 Hz to 20 kHz Frequency Response and 94dB Sensitivity
- Electroplate Injection Woofer Cone and Rubber Surround
- 1 Tweeter Per Speaker
- Sold in Pairs
|
Reviews
There are no reviews yet.