PULSE69-V0: Entry level 6×9″ inch Coaxial speakers with IMPP Cone
The PULSE69-V0 coaxial speakers are the new entry level range from VIBE. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
Type: Coaxial
Configuration: 3 way
Size: 6 x 9 inches
RMS Power: 100W
Peak Power: 300W
Max Power: 600W
Frequency Response: 45Hz – 20kHz
Impedance: 4 Ohms
Mounting Depth: 78mm
Mounting Diameter: 144mm x 216mm
Recommended Amp: POWERBOX80.4-V0
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
Reviews
There are no reviews yet.
Be the first to review “PULSE69-V0: PULSE 6×9″ Inch Coaxial Speakers” Cancel reply
Chaos Exxtreme 6" x 9" 2-Way 350W Full Range Speakers. (Sold in Pairs)
Phantom 6.5" 4-Way 400W Full Range Speakers. (Sold in Pairs)
Onyx 4" 4-Way 250W Full Range Speakers. (Sold in Pairs)
Content
PULSE69-V0: Entry level 6x9" inch Coaxial speakers with IMPP Cone
The PULSE69-V0 coaxial speakers are the new entry level range from VIBE. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
Type: Coaxial
Configuration: 3 way
Size: 6 x 9 inches
RMS Power: 100W
Peak Power: 300W
Max Power: 600W
Frequency Response: 45Hz – 20kHz
Impedance: 4 Ohms
Mounting Depth: 78mm
Mounting Diameter: 144mm x 216mm
Recommended Amp: POWERBOX80.4-V0
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
One 10" Woofer with DUAL 4 ohm Voice Coil
2100 Watts MAX 1050 Watts RMS Power Handling
88dB Sensitivity, 34 Hz Resonant Frequency
Poly Injection Cone and Rubber Surround
Works in .65 CuFt Sealed or 1 CuFt Ported enclosure
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
Full Range 6" x 9" 2-Way Speaker Pair
350 Watts MAX 175 Watts RMS Power Handling per Pair
50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
1 Tweeter Per Speaker
Sold in Pairs
Full Range 6.5" 4-Way Speaker Pair
400 Watts MAX 200 Watts RMS Power Handling per Pair
65 Hz to 22 kHz Frequency Response and 85dB Sensitivity
Polypropylene Woofer Cone and Rubber Surround
2 Tweeters and 1.25 inch Mylar Cone Midrange Per Speaker
Sold in Pairs
Full Range 4" 4-Way Speaker Pair
250 Watts MAX 125 Watts RMS Power Handling per Pair
120 Hz to 20 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
2 Tweeters and 1.18 inch Mylar Cone Midrange Per Speaker
Reviews
There are no reviews yet.