PULSE6C-V4: The Pulse 6.5″ component speaker is the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
SILK DOME TWEETER: Silk dome tweeters deliver smooth high frequency handling to give your music definition and clarity
IMPP WOOFER CONE: Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction
SEPARATE CROSSOVER: External passive crossover network separates low and high frequencies and is superior to in-line filters
Specifications
Type: Component
Configuration: 2 way
Size : 6.5″ (165 mm)
RMS Power : 80 Watts
Peak Power : 240 watts
Min Input : 40 watts RMS
Sensitivity : 90 dB
Freq Response : 65 Hz – 20 KHz
Impedance: 4 Ohms
Mounting Depth : 2.1″ (53 mm)
Mounting Diameter : 5.6″ (141 mm)
Recommended amp : PULSES4-V4
Reviews
There are no reviews yet.
Be the first to review “Vibe PULSE 6.5” component speaker: PULSE6C-V4” Cancel reply
Phantom 6.5" 4-Way 400W Full Range Speakers. (Sold in Pairs)
Model: BDPRO4T-V0
Pro Audio compression horn driver
107dB Sensitivity
150 Watts RMS
300 Watts Max
1.5kHz – 20kHz Response
Chaos Exxtreme 5.25" 2-Way 200W Full Range Speakers. (Sold in Pairs)
Content
Product Description
PULSE6C-V4: The Pulse 6.5" component speaker is the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
SILK DOME TWEETER: Silk dome tweeters deliver smooth high frequency handling to give your music definition and clarity
IMPP WOOFER CONE: Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction
SEPARATE CROSSOVER: External passive crossover network separates low and high frequencies and is superior to in-line filters
Specifications
Type: Component
Configuration: 2 way
Size : 6.5" (165 mm)
RMS Power : 80 Watts
Peak Power : 240 watts
Min Input : 40 watts RMS
Sensitivity : 90 dB
Freq Response : 65 Hz – 20 KHz
Impedance: 4 Ohms
Mounting Depth : 2.1" (53 mm)
Mounting Diameter : 5.6" (141 mm)
Recommended amp : PULSES4-V4
British Engineered 1 Inch Component Tweeter
The secret weapon is the incredible tweeter. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.
Specification
- 2″ Tweeter, 150w Peak
- 50w RMS, 1 way
- impedance 4 ohm
- Sensitivity: 94dB
- Frequency response: 1.5kHz – 25kHz
- Mounting depth: 0.5″ (12mm)
- mounting diameter: 1.5″ (39mm)
- Grill included
One 10" Woofer with DUAL 4 ohm Voice Coil
2100 Watts MAX 1050 Watts RMS Power Handling
88dB Sensitivity, 34 Hz Resonant Frequency
Poly Injection Cone and Rubber Surround
Works in .65 CuFt Sealed or 1 CuFt Ported enclosure
Full Range 6.5" 4-Way Speaker Pair
400 Watts MAX 200 Watts RMS Power Handling per Pair
65 Hz to 22 kHz Frequency Response and 85dB Sensitivity
Polypropylene Woofer Cone and Rubber Surround
2 Tweeters and 1.25 inch Mylar Cone Midrange Per Speaker
Sold in Pairs
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
Full Range 5.25" 2-Way Speaker Pair
200 Watts MAX 100 Watts RMS Power Handling per Pair
100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
Reviews
There are no reviews yet.