SLICKCBR12-V7: Hybrid Ported Vented Bass Enclosure with 12 inch Subwoofer
The new Vibe Slick CBR (SLICKCBR12-V7) enclosure takes the radical approach of removing the integrated amplifier and replacing it with a separate unit, this gives several advantages. The enclosure design can now be focused only on the volume needed for the woofer rather than losing space to an internal power source. Using a separate amplifier means that sound quality is at the forefront. Vibe has developed an inline Powerbox Micro amplifier and ISOAWK kit (available separately) that can be purchased with the enclosure to make it compatible with an ISO T harness to plug into the existing stereo loom in the vehicle. this supplies audio signal and power and earth meaning there is no need to connect a separate cable through to the vehicles battery, just plug and play.
Specifications
1200w Peak
400w RMS
Impedance 2 ohm
3.9″ x 21.6″ x 16.7″ (354 x 550 x 425mm)
4th order bass reflex enclosure
Reviews
There are no reviews yet.
Be the first to review “SLICKCBR12-V7: Slick 12 Inch Hybrid Vented Bass Enclosure” Cancel reply
SLICKCBR12-V7: Hybrid Ported Vented Bass Enclosure with 12 inch Subwoofer
The new Vibe Slick CBR (SLICKCBR12-V7) enclosure takes the radical approach of removing the integrated amplifier and replacing it with a separate unit, this gives several advantages. The enclosure design can now be focused only on the volume needed for the woofer rather than losing space to an internal power source. Using a separate amplifier means that sound quality is at the forefront. Vibe has developed an inline Powerbox Micro amplifier and ISOAWK kit (available separately) that can be purchased with the enclosure to make it compatible with an ISO T harness to plug into the existing stereo loom in the vehicle. this supplies audio signal and power and earth meaning there is no need to connect a separate cable through to the vehicles battery, just plug and play.
Specifications
1200w Peak
400w RMS
Impedance 2 ohm
3.9″ x 21.6″ x 16.7″ (354 x 550 x 425mm)
4th order bass reflex enclosure
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
PULSE12-V0 - 12 Inch Subwoofer
Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.
High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.
Specification
- 350 Watts RMS
- 1050 Watts Peak
- 2100 Watts SPL (BURP)
- Single 4Ω
- Pressed paper Cone
- PP Dome Dustcap
- 1.5″ OFC Voice Coil
- Poly Cotton Spider
- Bumped Backplate
- Butyl Foam Surround
Full Range 5.25" 2-Way Speaker Pair
200 Watts MAX 100 Watts RMS Power Handling per Pair
100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
1 Tweeter Per Speaker
Sold in Pairs
One 12" Woofer with DUAL 4 ohm Voice Coil
1600 Watts MAX 800 Watts RMS Power Handling
85dB Sensitivity, 26 Hz Resonant Frequency
Polypropylene & Paper Cone and Rubber Surround
Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
Blue LED Illumination
80 Watts x 4 Max Power, RBDS Tuner, Balance/Fader/Bass/Treble and Preset built-in EQ
Plays Bluetooth/DVD/CD/USB/SD, VCD, WMA, JPEG, FM/AM, Digital Media from Smart Phones
Compatible with Audio out from Smart Phones and MP3 Players
USB, SD, Aux, AV, Rear Camera, Steering Wheel Control Input
Video, Front, Rear & Sub Pre Amp Outputs
Wireless Remote, USB Charging
Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly
Reviews
There are no reviews yet.