SLICKCBR12-V7: Hybrid Ported Vented Bass Enclosure with 12 inch Subwoofer
The new Vibe Slick CBR (SLICKCBR12-V7) enclosure takes the radical approach of removing the integrated amplifier and replacing it with a separate unit, this gives several advantages. The enclosure design can now be focused only on the volume needed for the woofer rather than losing space to an internal power source. Using a separate amplifier means that sound quality is at the forefront. Vibe has developed an inline Powerbox Micro amplifier and ISOAWK kit (available separately) that can be purchased with the enclosure to make it compatible with an ISO T harness to plug into the existing stereo loom in the vehicle. this supplies audio signal and power and earth meaning there is no need to connect a separate cable through to the vehicles battery, just plug and play.
Specifications
1200w Peak
400w RMS
Impedance 2 ohm
3.9″ x 21.6″ x 16.7″ (354 x 550 x 425mm)
4th order bass reflex enclosure
Reviews
There are no reviews yet.
Be the first to review “SLICKCBR12-V7: Slick 12 Inch Hybrid Vented Bass Enclosure” Cancel reply
SLICKCBR12-V7: 12″ High Output Bass Enclosure Enclosure
Designed to work with Powerbox 400.1M
Unique port design for extended low frequency response
Single-DIN, CD/MP3 Player Bluetooth
Chaos Exxtreme 6" x 9" 3-Way 400W Full Range Speakers. (Sold in Pairs)
Phantom 6.5" 4-Way 400W Full Range Speakers. (Sold in Pairs)
BOSS Audio Systems R94 Car Speakers 500 Watt Per Pair, 6 x 9 Inch, Full Range, 4 Way Sold in Pairs
Model: BDPRO4T-V0
Pro Audio compression horn driver
107dB Sensitivity
150 Watts RMS
300 Watts Max
1.5kHz – 20kHz Response
Content
SLICKCBR12-V7: Hybrid Ported Vented Bass Enclosure with 12 inch Subwoofer
The new Vibe Slick CBR (SLICKCBR12-V7) enclosure takes the radical approach of removing the integrated amplifier and replacing it with a separate unit, this gives several advantages. The enclosure design can now be focused only on the volume needed for the woofer rather than losing space to an internal power source. Using a separate amplifier means that sound quality is at the forefront. Vibe has developed an inline Powerbox Micro amplifier and ISOAWK kit (available separately) that can be purchased with the enclosure to make it compatible with an ISO T harness to plug into the existing stereo loom in the vehicle. this supplies audio signal and power and earth meaning there is no need to connect a separate cable through to the vehicles battery, just plug and play.
Specifications
1200w Peak
400w RMS
Impedance 2 ohm
3.9″ x 21.6″ x 16.7″ (354 x 550 x 425mm)
4th order bass reflex enclosure
50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
Plays Bluetooth/CD/USB, MP3, WMA, FM/AM, Digital Media from Smart Phones
Compatible with Audio out from Smart Phones and MP3 Players
USB, Aux, Input
Front & Rear Pre Amp Outputs
Wireless Remote
Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly
Full Range 6" x 9" 3-Way Speaker Pair
400 Watts MAX 200 Watts RMS Power Handling per Pair
50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
1 Tweeter and 2 inch Polyimide Cone Midrange Per Speaker
Sold in Pairs
Full Range 6.5" 4-Way Speaker Pair
400 Watts MAX 200 Watts RMS Power Handling per Pair
65 Hz to 22 kHz Frequency Response and 85dB Sensitivity
Polypropylene Woofer Cone and Rubber Surround
2 Tweeters and 1.25 inch Mylar Cone Midrange Per Speaker
Sold in Pairs
BOSS Audio Systems R94 Car Speakers 500 Watt Per Pair, 6 x 9 Inch, Full Range, 4 Way Sold in Pairs
Full Range 6" x 9" 4-Way Car Speakers Pair
500 Watts MAX 250 Watts RMS Power Handling per Pair
50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
2 Tweeters and 2.5 inch Mylar Dome Midrange Per Car Speakers
Sold in Pairs
Before making your purchase, find out what type of speakers you will be replacing. You can simply measure the existing speakers and go from there. If you do not have any to begin with, a local Audio/Video shop can guide you with a few simple questions about your vehicle. Most of the time you will be able to drop them right in with little to no alterations needed. Pay close attention to the RMS power handling of the speakers you are purchasing. This is the continuous power that a speaker can handle without distorting. Your head unit will have to have the proper number of speaker outputs compared to how many speakers you plan to hook up to it, as well as sufficient power from the built-in amplifier. Sometimes though, a separate or external amplifier will have to be employed so that your speakers get the adequate power they need for optimal performance.
Full Range, 4-Way, 6” x 9”
Dimensions: Length 9.5” Width x 6.8” x Height 3.3”
Impedance: 4 Ohms, Frequency Response: 50Hz – 20KHz
Sensitivity: 92 dB @ 1 W/1 m
Cone: Poly Injection, Midrange: 2.5” Mylar Dome
Surround: Rubber, Basket: Stamped, Tweeter: 1” Dome & 0.5” Piezo
Poly Injection Cone
Polypropylene is a resilient and durable manufactured material. It allows for maximum flexibility that produces great sounding speakers.
Rubber Surround
Impermeable to air, rubber has the ability to endure or resist exposure to the many types of weather fronts. Rubber has many different applications. We use it for the surrounds in a many of our speakers to connect the cone to the basket
Dome Tweeter
Dome tweeters have improved sound dispersion and the shape radiates sound with a wider dispersion pattern than the semi-dome design. Since high-frequency sound waves are very directional, a wider dispersion of the sound waves will give you a larger "sweet spot" to work with when setting up your system
Piezoelectric Tweeter
Piezoelectric tweeters are resistant to overloads that would normally destroy most high frequency drivers and they can be used without a crossover due to their electrical properties. The active element is basically a piece of polarized material (i.e. some parts of the molecule are positively charged, while other parts of the molecule are negatively charged)
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
Reviews
There are no reviews yet.