SLICKPRO6M-V0 – 6 Inch Pro Audio Midrange: For over 10 years we have produced high end Pro audio in our Blackdeath range which has always been the loudest and best looking around! So it was about time we added Pro audio across the rest if the VIBE family.
The latest in SLICK Pro products have been designed around efficiency in order to get the best sounding and best priced Pro speakers possible, for example with the 6 inch Midrange having a sensitivity of 98dB!! this allows the speaker to play at huge volumes even on lower power. The range includes 6 and 8 inch midranges and a 3.7 inch Bullet tweeter, all with a unique to car audio rubberised gasket and well known SLICK design concept.
Specifications
Model – SLICKPRO6M-V0
Type – Pro audio midrange.
Configuration – 1-way
Speaker Size – 6.6” (167mm)
Peak/RMS Power – 275W / 125W
Sensitivity – 98dB
Frequency Response – 100Hz – 9kHz
Impedance – 4Ω
Mounting Depth – 1.9” (73mm)
Mounting Diameter – 5.7” (144mm)
Grill Included – No
Recommended Amp – POWERBOX250.2-V0
Reviews
There are no reviews yet.
Be the first to review “SLICKPRO6M-V0 – 6 Inch Pro Audio Midrange” Cancel reply
Chaos Exxtreme 6.5" 3-Way 300W Full Range Speakers. (Sold in Pairs)
Chaos Exxtreme 6" x 9" 2-Way 350W Full Range Speakers. (Sold in Pairs)
Model: BDPRO4T-V0
Pro Audio compression horn driver
107dB Sensitivity
150 Watts RMS
300 Watts Max
1.5kHz – 20kHz Response
BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space
The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
Content
VIBE 6 Inch Pro Audio Midrange
SLICKPRO6M-V0 – 6 Inch Pro Audio Midrange: For over 10 years we have produced high end Pro audio in our Blackdeath range which has always been the loudest and best looking around! So it was about time we added Pro audio across the rest if the VIBE family.
The latest in SLICK Pro products have been designed around efficiency in order to get the best sounding and best priced Pro speakers possible, for example with the 6 inch Midrange having a sensitivity of 98dB!! this allows the speaker to play at huge volumes even on lower power. The range includes 6 and 8 inch midranges and a 3.7 inch Bullet tweeter, all with a unique to car audio rubberised gasket and well known SLICK design concept.
Specifications
Model – SLICKPRO6M-V0
Type – Pro audio midrange.
Configuration – 1-way
Speaker Size – 6.6” (167mm)
Peak/RMS Power – 275W / 125W
Sensitivity – 98dB
Frequency Response – 100Hz – 9kHz
Impedance – 4Ω
Mounting Depth – 1.9” (73mm)
Mounting Diameter – 5.7” (144mm)
Grill Included – No
Recommended Amp – POWERBOX250.2-V0
Full Range 6.5" 3-Way Speaker Pair
300 Watts MAX 150 Watts RMS Power Handling per Pair
100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
1 Tweeter and 1 inch Polyimide Dome Midrange Per Speaker
Sold in Pairs
Full Range 6" x 9" 2-Way Speaker Pair
350 Watts MAX 175 Watts RMS Power Handling per Pair
50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
1 Tweeter Per Speaker
Sold in Pairs
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
BOSS Audio Systems BAB8 Amplified Car Subwoofer
Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Break Your Subwoofer In
Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.
8-inch 800-Watt subwoofer
Class A/B built-in amplifier
MOSFET power supply
RCA & speaker level input
Phase control
Bass boost
Low pass filter
Remote subwoofer control
Amplified Space Saver
A built-in amplifier powers the 8-inch subwoofer. No need to have a subwoofer housed in a box AND a separate amplifier. If you have a small cabin to work with, the BAB8 will provide the rich bass that every sound system cannot do without.
Remote Subwoofer Control
A wired remote subwoofer control at your fingertips gives you control, so when the need hits… so does your BASS
PULSE12-V0 - 12 Inch Subwoofer
Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.
High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.
Reviews
There are no reviews yet.