Compact 12 inch Bass Enclosure with Active Amplifier
BLACKAIRC12ACTIVE-V6: Black Compact 12 Inch Passive Radiator Active Subwoofer Enclosure Perfectly designed for today’s demand for high performance yet small footprint bass enclosures. Passive radiators enable the great bass response in a small enclosure with no port, with the advantages of no port non linearities and no high frequencies reflected out of a vent. Fully compatible with our plug and play micro amplifiers.
Specifications
12″ Passive Subwoofer Enclosure
1500w Peak, 500w RMS
Impedance: dual 2 ohm
13.8″ (351mm) x 15.8″ (402mm) x 11.4″ (290mm)
2nd order passive radiator enclosure
170w @ 4 ohm
1.5″ x 6.2″ x 3.2″ (37mm x 157mm x 82mm)
250w RMS @ 2 ohm
400w RMS @ 1 ohm
Frequency response: 10Hz – 500Hz
Crossover type: LP/subsonic
Crossover range: 30Hz – 150Hz Class D micro amplifier
Enclosure Design
Reviews
There are no reviews yet.
Be the first to review “BLACKAIRC12ACTIVE-V6: Black Compact 12 Inch Passive Radiator Active Subwoofer Enclosure” Cancel reply
BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space
Single-DIN, MECH-LESS Multimedia Player (no CD/DVD) Detach Panel Bluetooth
BlackDeath 10 Inch Pro Audio Midrange high output driver
Alloy Gasket included
Sold in Singles
Single-DIN, CD/MP3 Player Bluetooth
Phantom 6.5" 2-Way 500W Component Speakers. (Sold in Pairs)
Content
Compact 12 inch Bass Enclosure with Active Amplifier
BLACKAIRC12ACTIVE-V6: Black Compact 12 Inch Passive Radiator Active Subwoofer Enclosure Perfectly designed for today’s demand for high performance yet small footprint bass enclosures. Passive radiators enable the great bass response in a small enclosure with no port, with the advantages of no port non linearities and no high frequencies reflected out of a vent. Fully compatible with our plug and play micro amplifiers.
Specifications
12″ Passive Subwoofer Enclosure
1500w Peak, 500w RMS
Impedance: dual 2 ohm
13.8″ (351mm) x 15.8″ (402mm) x 11.4″ (290mm)
2nd order passive radiator enclosure
170w @ 4 ohm
1.5″ x 6.2″ x 3.2″ (37mm x 157mm x 82mm)
250w RMS @ 2 ohm
400w RMS @ 1 ohm
Frequency response: 10Hz – 500Hz
Crossover type: LP/subsonic
Crossover range: 30Hz – 150Hz Class D micro amplifier
Enclosure Design
BOSS Audio Systems BAB8 Amplified Car Subwoofer
Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Break Your Subwoofer In
Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.
8-inch 800-Watt subwoofer
Class A/B built-in amplifier
MOSFET power supply
RCA & speaker level input
Phase control
Bass boost
Low pass filter
Remote subwoofer control
Amplified Space Saver
A built-in amplifier powers the 8-inch subwoofer. No need to have a subwoofer housed in a box AND a separate amplifier. If you have a small cabin to work with, the BAB8 will provide the rich bass that every sound system cannot do without.
Remote Subwoofer Control
A wired remote subwoofer control at your fingertips gives you control, so when the need hits… so does your BASS
50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
No CD or DVD Player, Plays Bluetooth/USB, MP3, WMA, FM/AM, Digital Media from Smart Phones
Compatible with Audio out from Smart Phones and MP3 Players
USB, Aux, Input
Front & Rear Pre Amp Outputs
Detachable Front Panel, Wireless Remote, USB Charging
Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly
Competition 10" pro audio speaker
The BDPRO10M-V9: BlackDeath 10 Inch Pro Audio Midrange woofer is designed with excellent mid-bass response in mind. A semi-pressed paper cone has high sensitivity and low moving mass for monstrous output. Dual roll cloth surround offers fast, precise dampening of the cone with great bass response. The BlackHole Dustcap increases the effective cone area for higher SPL creating extreme volume.
BlackDeath range
VIBE Audio’s BlackDeath range is all about taking things to the extreme and creating products so crazy they have no right to exist. BlackDeath isn’t just about pushing the boundaries of audio innovation, it’s about annihilating them.
For many years people have been asking for coaxial and component speakers that are worthy to wear the BlackDeath logo, and after extensive development Vibe are proud to release the BlackDeath Pro Audio range.
Derived from PA speaker design, BlackDeath Pro Audio speakers are capable of immense sound pressure levels, meaning volume like you’ve never heard before. Ideal for competition use or for those who just want to play their music loud and proud.
Specifications
Model : BlackDeath Pro 8M
Configuration : 1 Way
Speaker Size : 10″ (2254mm)
RMS Power : 275 watts
Peak Power : 825 watts
Minimum Input : 125 watts
Sensitivity : 97 dB
Freq. Response : 55 Hz – 3.5 kHz
Impedance : 4 Ohm
Mounting Depth : 4.2″ (106mm)
Mounting Diameter: 9.25″ (235mm)
50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
Plays Bluetooth/CD/USB, MP3, WMA, FM/AM, Digital Media from Smart Phones
Compatible with Audio out from Smart Phones and MP3 Players
USB, Aux, Input
Front & Rear Pre Amp Outputs
Wireless Remote
Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly
Component 6.5" 2-Way Speaker Pair
500 Watts MAX 250 Watts RMS Power Handling per Pair
65 Hz to 20 kHz Frequency Response and 94dB Sensitivity
Electroplate Injection Woofer Cone and Rubber Surround
Reviews
There are no reviews yet.