Description |
- POWERBOX60.4-V9: 4 Channel Stereo Amplifier
- Includes remote control
- Bridgeable Channels at 4 Ohm
|
- PULSE4-V0: Pulse 4 Inch Coaxial Speaker
- Easy upgrade
- Complete with grills
| BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space | Onyx 4" 4-Way 250W Full Range Speakers. (Sold in Pairs) | The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE. | The new range of Vibe Slick speakers are the most efficient Vibe speaker to date. |
Content | 4 Channel Bridgeable Class AB amplifier
The new Vibe POWERBOX60.4-V9 amplifier range is designed to be able to offer a Vibe amplifier to power and speaker, subwoofer or enclosure I the Vibe range. Mono, 2, 4 and 5 channel amplifiers give a solution for any system. All the amplifiers feature auto sense technology which allows the amp to turn on and off without the need for a +12v remote trigger when using high level input. Signature Vibe detailing and an attractive satin silver finish with gloss black endplates ensure the Powerbox range will Stand out from the crowd!
Specifications
- 4 x 60w @ 4 ohm
- maximum power 640w
- Dimensions (H x W x D) – 2” x 9” x 7.6” (50mm x 229mm x 194mm)
- RMS @ 2Ω Stereo – 4 x 80 watts
- RMS @ 4Ω Mono – 2 x 160 watts
- Frequency Response – 20Hz – 20kHz
- Crossover Type – LP / HP / Flat
- Crossover Range – 50Hz – 4kHz
- Class AB Extruded aluminium heatsink provides superior heat dissipation and thermal performance.
- High level input with Autosense circuit allows the amplifier to turn on and off
| Entry level 4 inch Coaxial speaker with IMPP Cone
The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
- 4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
- Peak Power output – 40 Watts
- RMS Frequency Response: 100HZ – 20KHZ
- Sensitivity 83dB
- Mounting Diameter 3.7” (95MM)
- Mounting Depth 1.7” (44MM)
- Impedance : 4 OHMS
- Spade Terminal allows easy connection of speaker Cable.
- PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
- Torsion basket featuring snap on mounting tabs for greater installation flexibility.
- IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
|
BOSS Audio Systems BAB8 Amplified Car Subwoofer
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
|
- Full Range 4" 4-Way Speaker Pair
- 250 Watts MAX 125 Watts RMS Power Handling per Pair
- 120 Hz to 20 kHz Frequency Response and 90dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 2 Tweeters and 1.18 inch Mylar Cone Midrange Per Speaker
- Sold in Pairs
| PULSE12-V0 - 12 Inch Subwoofer
Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.
High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.
Specification
- - 350 Watts RMS
- - 1050 Watts Peak
- - 2100 Watts SPL (BURP)
- - Single 4Ω
- - Pressed paper Cone
- - PP Dome Dustcap
- - 1.5″ OFC Voice Coil
- - Poly Cotton Spider
- - Bumped Backplate
- - Butyl Foam Surround
| British Engineered 1 Inch Component Tweeter
The secret weapon is the incredible tweeter. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.
Specification
- - 2″ Tweeter, 150w Peak
- - 50w RMS, 1 way
- - impedance 4 ohm
- - Sensitivity: 94dB
- - Frequency response: 1.5kHz – 25kHz
- - Mounting depth: 0.5″ (12mm)
- - mounting diameter: 1.5″ (39mm)
- - Grill included
|
Reviews
There are no reviews yet.