SLICK6SQC-V9: British Engineered 2 way component speaker
“Innovation in efficiency – effortless sound quality”
VIBE’s mission with its Slick range of speakers (SLICK6SQC-V9) was to produce a truly Efficient speaker that delivered market leading performance.
The VIBE R&D team developed the Slick SQ speaker from the ground up using their skill and expertise in speaker design to produce the most efficient VIBE speaker to date!
The woofer design utilises a super lightweight paper composite cone and foam surround, a single layer spider and a 2 inch perfectly balanced and sized voice coil.
The slick woofer can, therefore, deliver effortless bass and peerless vocal response at any power input.
The SQ version of the renown Slick series speaker includes a full Passive crossover network has tweeter attenuation and better quality components to enrich the already fantastic sound!
The technology incorporated into the component tweeter is that of a product many times its cost.
Its tiny 25mm size makes it one of the smallest on the market, coupled with British design, engineering and built from European components.
Aesthetically beautiful, precise in performance, with market leading efficiency.
Specifications
6.5″ 2 way component speaker
270w Peak
90w RMS
Sensitivity: 94dB
Frequency response: 54Hz – 25 kHz
Impedance 4 ohm
Mounting depth: 2.4″ (61mm)
Mounting diameter: 5.6″ (142mm)
Ultra compact 25mm silk dome tweeter delivers an exceptional level of sound quality matched with high efficiency.
New heavier cone to allow more accurate bass and vocal response and better form to deal with the increased speaker BL
Larger motor than the standardised Slick6 which delivers a much greater motorforce allowing for a 25% power increase.
94db sensitivity rating, giving class leading speaker efficiency.
Full active crossover with high quality components
Modified VC for harmonised performance along side new motor and cone
Stylish design allowing seamless system integration.
Reviews
There are no reviews yet.
Be the first to review “SLICK6SQC-V9: Slick 6 Inch Sound Quality Component Speaker” Cancel reply
BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space
The new range of Vibe Slick speakers are the most efficient Vibe speaker to date.
Model: BDPRO4T-V0
Pro Audio compression horn driver
107dB Sensitivity
150 Watts RMS
300 Watts Max
1.5kHz – 20kHz Response
The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
Phantom 6.5" 4-Way 400W Full Range Speakers. (Sold in Pairs)
Content
SLICK6SQC-V9: British Engineered 2 way component speaker
“Innovation in efficiency – effortless sound quality”
VIBE’s mission with its Slick range of speakers (SLICK6SQC-V9) was to produce a truly Efficient speaker that delivered market leading performance.
The VIBE R&D team developed the Slick SQ speaker from the ground up using their skill and expertise in speaker design to produce the most efficient VIBE speaker to date!
The woofer design utilises a super lightweight paper composite cone and foam surround, a single layer spider and a 2 inch perfectly balanced and sized voice coil.
The slick woofer can, therefore, deliver effortless bass and peerless vocal response at any power input.
The SQ version of the renown Slick series speaker includes a full Passive crossover network has tweeter attenuation and better quality components to enrich the already fantastic sound!
The technology incorporated into the component tweeter is that of a product many times its cost.
Its tiny 25mm size makes it one of the smallest on the market, coupled with British design, engineering and built from European components.
Aesthetically beautiful, precise in performance, with market leading efficiency.
Specifications
6.5″ 2 way component speaker
270w Peak
90w RMS
Sensitivity: 94dB
Frequency response: 54Hz – 25 kHz
Impedance 4 ohm
Mounting depth: 2.4″ (61mm)
Mounting diameter: 5.6″ (142mm)
Ultra compact 25mm silk dome tweeter delivers an exceptional level of sound quality matched with high efficiency.
New heavier cone to allow more accurate bass and vocal response and better form to deal with the increased speaker BL
Larger motor than the standardised Slick6 which delivers a much greater motorforce allowing for a 25% power increase.
94db sensitivity rating, giving class leading speaker efficiency.
Full active crossover with high quality components
Modified VC for harmonised performance along side new motor and cone
Stylish design allowing seamless system integration.
BOSS Audio Systems BAB8 Amplified Car Subwoofer
Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Break Your Subwoofer In
Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.
8-inch 800-Watt subwoofer
Class A/B built-in amplifier
MOSFET power supply
RCA & speaker level input
Phase control
Bass boost
Low pass filter
Remote subwoofer control
Amplified Space Saver
A built-in amplifier powers the 8-inch subwoofer. No need to have a subwoofer housed in a box AND a separate amplifier. If you have a small cabin to work with, the BAB8 will provide the rich bass that every sound system cannot do without.
Remote Subwoofer Control
A wired remote subwoofer control at your fingertips gives you control, so when the need hits… so does your BASS
British Engineered 1 Inch Component Tweeter
The secret weapon is the incredible tweeter. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.
Specification
- 2″ Tweeter, 150w Peak
- 50w RMS, 1 way
- impedance 4 ohm
- Sensitivity: 94dB
- Frequency response: 1.5kHz – 25kHz
- Mounting depth: 0.5″ (12mm)
- mounting diameter: 1.5″ (39mm)
- Grill included
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
PULSE12-V0 - 12 Inch Subwoofer
Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.
High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.
Specification
- 350 Watts RMS
- 1050 Watts Peak
- 2100 Watts SPL (BURP)
- Single 4Ω
- Pressed paper Cone
- PP Dome Dustcap
- 1.5″ OFC Voice Coil
- Poly Cotton Spider
- Bumped Backplate
- Butyl Foam Surround
Full Range 6.5" 4-Way Speaker Pair
400 Watts MAX 200 Watts RMS Power Handling per Pair
65 Hz to 22 kHz Frequency Response and 85dB Sensitivity
Polypropylene Woofer Cone and Rubber Surround
2 Tweeters and 1.25 inch Mylar Cone Midrange Per Speaker
Reviews
There are no reviews yet.