SLICKV12T-V2: Hybrid venting combines both slot and tube ports to deliver incredible low frequencies.
Lean and mean vented bass enclosure.
The all new SLICK V12 (SLICKV12T-V2) delivers all the performance you’ve come to expect from the SLICK CBR but in a slim form factor. Ideally suited to vehicles with small or shallow trunk space, the SLICK V12 is over 30% less deep than its bigger CBR sibling yet manages to match the performance. The SLICK V12 series are designed to offer maximum compatibility with a wide range of amplifiers thanks to their dual voice coils.
Specifications
Model: SLICKV12T-V2
Driver: 2 x SLICK12
Type: Passive bass enclosure
Peak Power: 2400 Watts
RMS Power: 800 Watts
Impedance: Dual 2 Ohms
Dimensions (H x W x D): 13.9″ x 35.4″ x 11.3″ (355mm x 900mm x 288mm)
Configuration: 4th order bass reflex
Enclosure Type: Trapezius Bass Enclosure
Recommended Amplifier: POWERBOX400.1M-V7
Reviews
There are no reviews yet.
Be the first to review “SLICKV12T-V2 – VIBE SLICK 12 Inch Twin Passive Bass Subwoofer Enclosure” Cancel reply
The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
Onyx 5.25" 4-Way 300W Full Range Speakers. (Sold in Pairs)
Model: BDPRO4T-V0
Pro Audio compression horn driver
107dB Sensitivity
150 Watts RMS
300 Watts Max
1.5kHz – 20kHz Response
Content
SLICKV12T-V2: Hybrid venting combines both slot and tube ports to deliver incredible low frequencies.
Lean and mean vented bass enclosure.
The all new SLICK V12 (SLICKV12T-V2) delivers all the performance you’ve come to expect from the SLICK CBR but in a slim form factor. Ideally suited to vehicles with small or shallow trunk space, the SLICK V12 is over 30% less deep than its bigger CBR sibling yet manages to match the performance. The SLICK V12 series are designed to offer maximum compatibility with a wide range of amplifiers thanks to their dual voice coils.
Specifications
Model: SLICKV12T-V2
Driver: 2 x SLICK12
Type: Passive bass enclosure
Peak Power: 2400 Watts
RMS Power: 800 Watts
Impedance: Dual 2 Ohms
Dimensions (H x W x D): 13.9″ x 35.4″ x 11.3″ (355mm x 900mm x 288mm)
Configuration: 4th order bass reflex
Enclosure Type: Trapezius Bass Enclosure
Recommended Amplifier: POWERBOX400.1M-V7
Full Range 6" x 9" 2-Way Speaker Pair
350 Watts MAX 175 Watts RMS Power Handling per Pair
50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
1 Tweeter Per Speaker
Sold in Pairs
One 12" Woofer with DUAL 4 ohm Voice Coil
1600 Watts MAX 800 Watts RMS Power Handling
85dB Sensitivity, 26 Hz Resonant Frequency
Polypropylene & Paper Cone and Rubber Surround
Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
Blue LED Illumination
PULSE12-V0 - 12 Inch Subwoofer
Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.
High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.
Specification
- 350 Watts RMS
- 1050 Watts Peak
- 2100 Watts SPL (BURP)
- Single 4Ω
- Pressed paper Cone
- PP Dome Dustcap
- 1.5″ OFC Voice Coil
- Poly Cotton Spider
- Bumped Backplate
- Butyl Foam Surround
Full Range 5.25" 4-Way Speaker Pair
300 Watts MAX 150 Watts RMS Power Handling per Pair
95 Hz to 20 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
2 Tweeters and .98 inch Mylar Cone Midrange Per Speaker
Sold in Pairs
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
Reviews
There are no reviews yet.