BLACKAIRPRO8M-V0

The VIBE BlackAir range has always been about sound quality paired with volume commonly known as SQL and the new range of Pro audio drivers are no exception.

Aimed squarely at the SQL competition scene, these all-new Pro audio drivers deliver huge volume with all the quality you’ve come to expect from VIBE. This is a pairing of HIFI sound quality with Pro audio volume – The best of both worlds!

We’ve added a high efficiency 6.5” midrange driver and married it to an oversized 4.5” Titanium bullet tweeter to deliver best in class performance.

• Non pressed paper cone
• Dual roll foam surround
• 38mm voice coil
• Polycotton spiders
• Spade terminal for easy connection
• Rubber gasket

Specifications

• Model – BLACKAIRPRO8M-V0
• Type – Pro audio midrange
• Configuration – 1-way
• Speaker Size – 8” (208mm)
• RMS Power – 180W
• Peak – 540W
• Sensitivity – 98dB
• Frequency Response – 80Hz – 10.5kHz
• Impedance – 4Ω
• Mounting Depth – 3” (75mm)
• Mounting Diameter – 7.1” (181mm)
• Grille Included – No
• Recommended Amp – POWERBOX150.4M-V0

FREQUENCY RESPONSE

• One 12" Woofer with DUAL 4 ohm Voice Coil
• 2600 Watts MAX 1300 Watts RMS Power Handling
• 88dB Sensitivity, 28 Hz Resonant Frequency
• Polypropylene & Paper Cone and Rubber Surround
• Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure

Competition 10" pro audio speaker

BlackDeath range

Specifications

BDPRO4T-V0 - Compression Horn Driver

Specifications

• Type – Compression driver
• Configuration – 1-way
• Speaker size – 4.5” (115mm)
• Frequency Response – 1.5khz – 20Khz
• Sensitivity – 107dB
• RMS Power – 150 watts
• Peak Power – 300 watts
• Sensitivity – 105dB
• Impedance – 8Ω
• Mounting Depth – 2.6” (67mm)
• Mounting Diameter – 3.5” (90mm)
• pro audio compression driver
• composite aluminium diaphragm
• Torsion basket featuring snap on mounting tabs for greater installation flexibility.
• cast aluminium housing

• wide frequency response
• high power y35 ferrite magnet
• spring loaded terminals

Frequency Response

• 50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
• Plays Bluetooth/CD/USB, MP3, WMA, FM/AM, Digital Media from Smart Phones
• Compatible with Audio out from Smart Phones and MP3 Players
• USB, Aux, Input
• Front & Rear Pre Amp Outputs
• Wireless Remote
• Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly

• Full Range 6" x 9" 4-Way  Car Speakers Pair
• 500 Watts MAX 250 Watts RMS Power Handling per Pair
• 50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
• Poly Injection Woofer Cone and Rubber Surround
• 2 Tweeters and 2.5 inch Mylar Dome Midrange Per Car Speakers
• Sold in Pairs

Before making your purchase, find out what type of speakers you will be replacing. You can simply measure the existing speakers and go from there. If you do not have any to begin with, a local Audio/Video shop can guide you with a few simple questions about your vehicle. Most of the time you will be able to drop them right in with little to no alterations needed. Pay close attention to the RMS power handling of the speakers you are purchasing. This is the continuous power that a speaker can handle without distorting. Your head unit will have to have the proper number of speaker outputs compared to how many speakers you plan to hook up to it, as well as sufficient power from the built-in amplifier. Sometimes though, a separate or external amplifier will have to be employed so that your speakers get the adequate power they need for optimal performance.

• Full Range, 4-Way, 6” x 9”
• Dimensions: Length 9.5” Width x 6.8” x Height 3.3”
• Mounting Depth: 3.1”, Mounting Hole: 8.8”
• Power Handling: Peak - 500 Watts (pair), RMS - 250 Watts (pair)
• Impedance: 4 Ohms, Frequency Response: 50Hz – 20KHz
• Sensitivity: 92 dB @ 1 W/1 m
• Cone: Poly Injection, Midrange: 2.5” Mylar Dome
• Surround: Rubber, Basket: Stamped, Tweeter: 1” Dome & 0.5” Piezo

Poly Injection Cone Polypropylene is a resilient and durable manufactured material. It allows for maximum flexibility that produces great sounding speakers.	Rubber Surround Impermeable to air, rubber has the ability to endure or resist exposure to the many types of weather fronts. Rubber has many different applications. We use it for the surrounds in a many of our speakers to connect the cone to the basket	Dome Tweeter Dome tweeters have improved sound dispersion and the shape radiates sound with a wider dispersion pattern than the semi-dome design. Since high-frequency sound waves are very directional, a wider dispersion of the sound waves will give you a larger "sweet spot" to work with when setting up your system	Piezoelectric Tweeter Piezoelectric tweeters are resistant to overloads that would normally destroy most high frequency drivers and they can be used without a crossover due to their electrical properties. The active element is basically a piece of polarized material (i.e. some parts of the molecule are positively charged, while other parts of the molecule are negatively charged)