The VIBE BlackAir range has always been about sound quality paired with volume commonly known as SQL and the new range of Pro audio drivers are no exception.
Aimed squarely at the SQL competition scene, these all-new Pro audio drivers deliver huge volume with all the quality you’ve come to expect from VIBE. This is a pairing of HIFI sound quality with Pro audio volume – The best of both worlds!
We’ve added a high efficiency 6.5” midrange driver and married it to an oversized 4.5” Titanium bullet tweeter to deliver best in class performance.
Non pressed paper cone
Dual roll foam surround
38mm voice coil
Polycotton spiders
Spade terminal for easy connection
Rubber gasket
Specifications
Model – BLACKAIRPRO8M-V0
Type – Pro audio midrange
Configuration – 1-way
Speaker Size – 8” (208mm)
RMS Power – 180W
Peak – 540W
Sensitivity – 98dB
Frequency Response – 80Hz – 10.5kHz
Impedance – 4Ω
Mounting Depth – 3” (75mm)
Mounting Diameter – 7.1” (181mm)
Grille Included – No
Recommended Amp – POWERBOX150.4M-V0
FREQUENCY RESPONSE
Reviews
There are no reviews yet.
Be the first to review “BLACKAIRPRO8M-V0 – Vibe Blackair 8 inch Pro Midrange Speakers” Cancel reply
Phantom 6.5" 4-Way 400W Full Range Speakers. (Sold in Pairs)
BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space
The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
Onyx 4" 4-Way 250W Full Range Speakers. (Sold in Pairs)
Chaos Exxtreme 6" x 9" 2-Way 350W Full Range Speakers. (Sold in Pairs)
Content
BLACKAIRPRO8M-V0
The VIBE BlackAir range has always been about sound quality paired with volume commonly known as SQL and the new range of Pro audio drivers are no exception.
Aimed squarely at the SQL competition scene, these all-new Pro audio drivers deliver huge volume with all the quality you’ve come to expect from VIBE. This is a pairing of HIFI sound quality with Pro audio volume – The best of both worlds!
We’ve added a high efficiency 6.5” midrange driver and married it to an oversized 4.5” Titanium bullet tweeter to deliver best in class performance.
Non pressed paper cone
Dual roll foam surround
38mm voice coil
Polycotton spiders
Spade terminal for easy connection
Rubber gasket
Specifications
Model – BLACKAIRPRO8M-V0
Type – Pro audio midrange
Configuration – 1-way
Speaker Size – 8” (208mm)
RMS Power – 180W
Peak – 540W
Sensitivity – 98dB
Frequency Response – 80Hz – 10.5kHz
Impedance – 4Ω
Mounting Depth – 3” (75mm)
Mounting Diameter – 7.1” (181mm)
Grille Included – No
Recommended Amp – POWERBOX150.4M-V0
FREQUENCY RESPONSE
Full Range 6.5" 4-Way Speaker Pair
400 Watts MAX 200 Watts RMS Power Handling per Pair
65 Hz to 22 kHz Frequency Response and 85dB Sensitivity
Polypropylene Woofer Cone and Rubber Surround
2 Tweeters and 1.25 inch Mylar Cone Midrange Per Speaker
Sold in Pairs
BOSS Audio Systems BAB8 Amplified Car Subwoofer
Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Break Your Subwoofer In
Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.
8-inch 800-Watt subwoofer
Class A/B built-in amplifier
MOSFET power supply
RCA & speaker level input
Phase control
Bass boost
Low pass filter
Remote subwoofer control
Amplified Space Saver
A built-in amplifier powers the 8-inch subwoofer. No need to have a subwoofer housed in a box AND a separate amplifier. If you have a small cabin to work with, the BAB8 will provide the rich bass that every sound system cannot do without.
Remote Subwoofer Control
A wired remote subwoofer control at your fingertips gives you control, so when the need hits… so does your BASS
PULSE12-V0 - 12 Inch Subwoofer
Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.
High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.
Specification
- 350 Watts RMS
- 1050 Watts Peak
- 2100 Watts SPL (BURP)
- Single 4Ω
- Pressed paper Cone
- PP Dome Dustcap
- 1.5″ OFC Voice Coil
- Poly Cotton Spider
- Bumped Backplate
- Butyl Foam Surround
Full Range 4" 4-Way Speaker Pair
250 Watts MAX 125 Watts RMS Power Handling per Pair
120 Hz to 20 kHz Frequency Response and 90dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
2 Tweeters and 1.18 inch Mylar Cone Midrange Per Speaker
Sold in Pairs
Full Range 6" x 9" 2-Way Speaker Pair
350 Watts MAX 175 Watts RMS Power Handling per Pair
50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
Reviews
There are no reviews yet.