BOSS Audio Single Din LED Illumination PD12LED

AED 550.00
admin

Phantom – 12″ DUAL Voice Coil (4 Ohm) 1600W Subwoofer. (Sold Single)

Out stock

Out of stock

Category:
  • One 12″ Woofer with DUAL 4 ohm Voice Coil
  • 1600 Watts MAX 800 Watts RMS Power Handling
  • 85dB Sensitivity, 26 Hz Resonant Frequency
  • Polypropylene & Paper Cone and Rubber Surround
  • Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
  • Blue LED Illumination

Reviews

There are no reviews yet.

Be the first to review “BOSS Audio Single Din LED Illumination PD12LED”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsBOSS Audio Single Din LED Illumination PD12LED removeBOSS Audio Systems BAB8 Amplified Car Subwoofer removeSLICK1-V7: Slick 1 Inch Component Tweeter removeBOSS Audio Systems CH6920 Car Speakers - 350 Watts Of Power Per Pair And 175 Watts Each, 6 x 9 Inch, Full Range, 2 Way, Sold in Pairs, Easy Mounting removeBOSS Audio Systems CH6930 Car Speakers - 400 Watts Of Power Per Pair, 200 Watts Each, 6 x 9 Inch, Full Range, 3 Way, Sold in Pairs removePULSE4-V0: Pulse 4 Inch Coaxial Speaker remove
ImageBOSS Audio Systems BAB8 Amplified Car SubwooferPULSE4-V0: Pulse 4 Inch Coaxial Speaker
SKU
Rating
PriceAED 550.00AED 499.00AED 122.00AED 149.00AED 140.00AED 83.00
Stock

Out of stock

AvailabilityOut of stock
Add to cart

DescriptionPhantom - 12" DUAL Voice Coil (4 Ohm) 1600W Subwoofer. (Sold Single)

BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

The new range of Vibe Slick speakers are the most efficient Vibe speaker to date.Chaos Exxtreme 6" x 9" 2-Way 350W Full Range Speakers. (Sold in Pairs)Chaos Exxtreme 6" x 9" 3-Way 400W Full Range Speakers. (Sold in Pairs)
  • PULSE4-V0: Pulse 4 Inch Coaxial Speaker
  • Easy upgrade
  • Complete with grills
Content
  • One 12" Woofer with DUAL 4 ohm Voice Coil
  • 1600 Watts MAX 800 Watts RMS Power Handling
  • 85dB Sensitivity, 26 Hz Resonant Frequency
  • Polypropylene & Paper Cone and Rubber Surround
  • Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
  • Blue LED Illumination
 BOSS Audio Systems BAB8 Amplified Car Subwoofer
  • Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
 
Break Your Subwoofer In Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.  
  • 8-inch 800-Watt subwoofer
  • Class A/B built-in amplifier
  • MOSFET power supply
  • RCA & speaker level input
  • Phase control
  • Bass boost
  • Low pass filter
  • Remote subwoofer control
 

British Engineered 1 Inch Component Tweeter

The secret weapon is the incredible tweeter. The component tweeter uses high end components and is one of the smallest on the market, but packs a huge punch, causing Car & Hifi magazine to call it a force to be reckoned with as it provides great detail and good spatiality.

Specification

  • - 2″ Tweeter, 150w Peak
  • - 50w RMS, 1 way
  • - impedance 4 ohm
  • - Sensitivity: 94dB
  • - Frequency response: 1.5kHz – 25kHz
  • - Mounting depth: 0.5″ (12mm)
  • - mounting diameter: 1.5″ (39mm)
  • - Grill included
  • Full Range 6" x 9" 2-Way Speaker Pair
  • 350 Watts MAX 175 Watts RMS Power Handling per Pair
  • 50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 1 Tweeter Per Speaker
  • Sold in Pairs
  • Full Range 6" x 9" 3-Way Speaker Pair
  • 400 Watts MAX 200 Watts RMS Power Handling per Pair
  • 50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 1 Tweeter and 2 inch Polyimide Cone Midrange Per Speaker
  • Sold in Pairs

Entry level 4 inch Coaxial speaker with IMPP Cone

The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.  

Specifications

  • 4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
  • Peak Power output – 40 Watts
  • RMS Frequency Response: 100HZ – 20KHZ
  • Sensitivity 83dB
  • Mounting Diameter 3.7” (95MM)
  • Mounting Depth 1.7” (44MM)
  • Impedance : 4 OHMS
  • Spade Terminal allows easy connection of speaker Cable.
  • PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
  • Torsion basket featuring snap on mounting tabs for greater installation flexibility.
  • IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information

Related Products

Quick View
(0)
Car Audio

BOSS Audio Systems CH6930 Car Speakers – 400 Watts Of Power Per Pair, 200 Watts Each, 6 x 9 Inch, Full Range, 3 Way, Sold in Pairs

AED 140.00
BOSS Audio Systems BAB8 Amplified Car Subwoofer
Quick View
(0)
Car Audio

BOSS Audio Systems BAB8 Amplified Car Subwoofer

AED 499.00
Quick View
Out Of Stock
(0)
Car Audio

Boss Audio System 625UAB

AED 199.00
Quick View
Out Of Stock
(0)
Car Audio

BOSS Audio Systems BVCP9700A-C

AED 3,595.00
PULSE4-V0: Pulse 4 Inch Coaxial Speaker
Quick View
(0)
Car Audio

PULSE4-V0: Pulse 4 Inch Coaxial Speaker

AED 83.00