| Description |
- SLICK12D2
- 500 Watts RMS
- 1500 Watts MAX
- Dual 2Ohm
- Large Foam Roll Surround
| Chaos Exxtreme 6.5" 3-Way 300W Full Range Speakers. (Sold in Pairs) | Phantom 6.5" 2-Way 500W Component Speakers. (Sold in Pairs) | The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE. | BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space |
- BlackDeath 10 Inch Pro Audio Midrange high output driver
- Alloy Gasket included
- Sold in Singles
|
| Content |
SLICK12D2-V0 - 12 Inch Subwoofer
With the biggest magnet assembly and highest level of motor force ever seen on our entry level subwoofers, the latest incarnation of SLICK from VIBE are the best subwoofers we have ever produced.
Using our well known VIBE designed Torsion basket we are able to house a large spider assembly which delivers the most excursion ever from an entry level subwoofer.
Featuring a high temperature 2” (50mm) 4 layer dual 2Ω voice coil, power handling has had a significant increase over the previous models.
All new semi pressed, composite FEA cone paired with a wide roll stitched foam surround deliver powerful low frequency response with outstanding fidelity.
Powerful • Precise • Versatile
The latest revision of the SLICK subwoofer is our best yet.
With the largest magnet structure we have every created in this range combined with precision engineered voice coil, spider pack and cone structure the Slick subwoofers deliver precise and deep bass.
All aspects of this subwoofer have been considered including our brand new dustcap design, engineered for added strength for the cone while giving a unique two tone floating affect not seen before.
The new Slick subwoofers also feature a wide roll foam surround allows huge excursion and delivery of even the lowest frequencies. Overall the best Slick series subwoofer we have ever made.
Specifications
- 500 Watts RMS
- 1500 Watts Peak
- 3000 Watts SPL (BURP)
- DUAL 2OHM
- Composite paper Cone
- PP Dome Dust-cap
- 2″ OFC Voice Coil
- Poly Cotton Spider
- Bumped Backplate
- Butyl Foam Surround
- FEMM Motor
- Spring Loaded terminals
|
- Full Range 6.5" 3-Way Speaker Pair
- 300 Watts MAX 150 Watts RMS Power Handling per Pair
- 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
- Poly Injection Woofer Cone and Rubber Surround
- 1 Tweeter and 1 inch Polyimide Dome Midrange Per Speaker
- Sold in Pairs
|
- Component 6.5" 2-Way Speaker Pair
- 500 Watts MAX 250 Watts RMS Power Handling per Pair
- 65 Hz to 20 kHz Frequency Response and 94dB Sensitivity
- Electroplate Injection Woofer Cone and Rubber Surround
- 1 Tweeter Per Speaker
- Sold in Pairs
| PULSE12-V0 - 12 Inch Subwoofer
Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.
High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.
Specification
- - 350 Watts RMS
- - 1050 Watts Peak
- - 2100 Watts SPL (BURP)
- - Single 4Ω
- - Pressed paper Cone
- - PP Dome Dustcap
- - 1.5″ OFC Voice Coil
- - Poly Cotton Spider
- - Bumped Backplate
- - Butyl Foam Surround
|
BOSS Audio Systems BAB8 Amplified Car Subwoofer
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
| Competition 10" pro audio speaker
The BDPRO10M-V9: BlackDeath 10 Inch Pro Audio Midrange woofer is designed with excellent mid-bass response in mind. A semi-pressed paper cone has high sensitivity and low moving mass for monstrous output. Dual roll cloth surround offers fast, precise dampening of the cone with great bass response. The BlackHole Dustcap increases the effective cone area for higher SPL creating extreme volume.
BlackDeath range
VIBE Audio’s BlackDeath range is all about taking things to the extreme and creating products so crazy they have no right to exist. BlackDeath isn’t just about pushing the boundaries of audio innovation, it’s about annihilating them.
For many years people have been asking for coaxial and component speakers that are worthy to wear the BlackDeath logo, and after extensive development Vibe are proud to release the BlackDeath Pro Audio range.
Derived from PA speaker design, BlackDeath Pro Audio speakers are capable of immense sound pressure levels, meaning volume like you’ve never heard before. Ideal for competition use or for those who just want to play their music loud and proud.
Specifications
- Model : BlackDeath Pro 8M
- Configuration : 1 Way
- Speaker Size : 10″ (2254mm)
- RMS Power : 275 watts
- Peak Power : 825 watts
- Minimum Input : 125 watts
- Sensitivity : 97 dB
- Freq. Response : 55 Hz – 3.5 kHz
- Impedance : 4 Ohm
- Mounting Depth : 4.2″ (106mm)
- Mounting Diameter: 9.25″ (235mm)
|
Reviews
There are no reviews yet.