SLICKCBR12-V7: Hybrid Ported Vented Bass Enclosure with 12 inch Subwoofer
The new Vibe Slick CBR (SLICKCBR12-V7) enclosure takes the radical approach of removing the integrated amplifier and replacing it with a separate unit, this gives several advantages. The enclosure design can now be focused only on the volume needed for the woofer rather than losing space to an internal power source. Using a separate amplifier means that sound quality is at the forefront. Vibe has developed an inline Powerbox Micro amplifier and ISOAWK kit (available separately) that can be purchased with the enclosure to make it compatible with an ISO T harness to plug into the existing stereo loom in the vehicle. this supplies audio signal and power and earth meaning there is no need to connect a separate cable through to the vehicles battery, just plug and play.
Specifications
1200w Peak
400w RMS
Impedance 2 ohm
3.9″ x 21.6″ x 16.7″ (354 x 550 x 425mm)
4th order bass reflex enclosure
Reviews
There are no reviews yet.
Be the first to review “SLICKCBR12-V7: Slick 12 Inch Hybrid Vented Bass Enclosure” Cancel reply
SLICKCBR12-V7: Hybrid Ported Vented Bass Enclosure with 12 inch Subwoofer
The new Vibe Slick CBR (SLICKCBR12-V7) enclosure takes the radical approach of removing the integrated amplifier and replacing it with a separate unit, this gives several advantages. The enclosure design can now be focused only on the volume needed for the woofer rather than losing space to an internal power source. Using a separate amplifier means that sound quality is at the forefront. Vibe has developed an inline Powerbox Micro amplifier and ISOAWK kit (available separately) that can be purchased with the enclosure to make it compatible with an ISO T harness to plug into the existing stereo loom in the vehicle. this supplies audio signal and power and earth meaning there is no need to connect a separate cable through to the vehicles battery, just plug and play.
Specifications
1200w Peak
400w RMS
Impedance 2 ohm
3.9″ x 21.6″ x 16.7″ (354 x 550 x 425mm)
4th order bass reflex enclosure
Full Range 6" x 9" 3-Way Speaker Pair
400 Watts MAX 200 Watts RMS Power Handling per Pair
50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
Poly Injection Woofer Cone and Rubber Surround
1 Tweeter and 2 inch Polyimide Cone Midrange Per Speaker
Sold in Pairs
BDPRO4T-V0 - Compression Horn Driver
Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver.
The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario.
The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market.
We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end.
Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.
Specifications
Type – Compression driver
Configuration – 1-way
Speaker size – 4.5” (115mm)
Frequency Response – 1.5khz – 20Khz
Sensitivity – 107dB
RMS Power – 150 watts
Peak Power – 300 watts
Sensitivity – 105dB
Impedance – 8Ω
Mounting Depth – 2.6” (67mm)
Mounting Diameter – 3.5” (90mm)
pro audio compression driver
composite aluminium diaphragm
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
cast aluminium housing
wide frequency response
high power y35 ferrite magnet
spring loaded terminals
Frequency Response
Entry level 4 inch Coaxial speaker with IMPP Cone
The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.
Specifications
4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
Peak Power output – 40 Watts
RMS Frequency Response: 100HZ – 20KHZ
Sensitivity 83dB
Mounting Diameter 3.7” (95MM)
Mounting Depth 1.7” (44MM)
Impedance : 4 OHMS
Spade Terminal allows easy connection of speaker Cable.
PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
Torsion basket featuring snap on mounting tabs for greater installation flexibility.
IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
One 12" Woofer with DUAL 4 ohm Voice Coil
1600 Watts MAX 800 Watts RMS Power Handling
85dB Sensitivity, 26 Hz Resonant Frequency
Polypropylene & Paper Cone and Rubber Surround
Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
Blue LED Illumination
50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
Plays Bluetooth/CD, FM/AM, Digital Media from Smart Phones
Compatible with Audio out from Smart Phones and MP3 Players
Reviews
There are no reviews yet.